NEC NECCare SigmaBlade Manual de usuario

NECCare

■■■■■■■

NECCare

Standard

Warranty

Program

SigmaBlade Servers

Proprietary Notice and Liability Disclaimer

The information disclosed in this document, including all designs and related materials, is

the valuable property of NEC Corporation of America, (“NECAM”) and/or its licensors.

NEC Corporation of America and/or its licensors, as appropriate, reserve all patent,

manufacturing, reproduction, use, and sales rights thereto, except to the extent said rights

are expressly granted to others.

The NEC Corporation of America product(s) discussed in this document is warranted in

accordance with the terms of the Limited Warranty Statement accompanying each

product. However, actual performance of each product is dependent upon factors such as

system configuration, customer data, and operator control. Since implementation by

customers of each product may vary, the suitability of specific product configurations and

applications must be determined by the customer and is not warranted by NEC

Corporation of America

To allow for design and specification improvements, the information in this document is

subject to change at any time, without notice. Reproduction of this document or portions

thereof without prior written approval of NEC Corporation of America is prohibited.

Trademarks

NECCare is a service mark of NEC Corporation of America.

NEC is a registered trademark of NEC Corporation and is used under license.

NEC Corporation of America

10850 Gold Center Drive, Suite 200,

Rancho Cordova, CA 95670

Standard SigmaBlade Server Warranty

Contents

Introduction.........................................................................................................................2

Warranty Registration.........................................................................................................2

Program Highlights.............................................................................................................2

Installation Service .............................................................................................................3

Relocation Service ..............................................................................................................3

Registered Limited Warranty..............................................................................................3

Who is Protected? ...............................................................................................................4

What is Covered and What is Not Covered? ......................................................................4

What NEC Corporation of America Will and Will Not Pay For ........................................5

How You Can Get Warranty Service..................................................................................5

On-Site Service........................................................................................................... 6

Limitation of Damages and Implied Warranties.................................................................6

Introduction

NEC Corporation of America, “NECAM”, offers one of the

strongest warranty programs in the computer industry. This

document will focus on the NECCare Standard Warranty

Program for Express5800 SigmaBlade Servers.

Warranty Registration

For efficient service, register your system online at:

http://www.necam.com/registration

Upon receipt of the registration information, your ne w NEC

product will be registered for NECCare Service as well as

providing you with product updates and program information.

Program Highlights

NEC Corporation of America’s Standard NECCare

Maintenance and Service Warranty Program offers you the

following benefits:

■

3-Years Standard Limited Warranty coverage

■

3-Years On-site Next Business Day support after phone

diagnosis.

■

Toll-free hardware technical support in the continental US

and Canada, Monday thru Friday, 8a-5p (local time).

■

Next business day response from time of dispatch. An

authorized service technician will be on site the fo llowing

business day once a service call is deemed necessary

following trouble-shooting efforts between the customer and

NECAM.

■

90 days telephone support for core software. 1 year support

for VMWare.

Supplemental Services

NECCare Services are designed to reduce risks and protect

your IT investment with the NEC Express5800 SigmaBlade

Servers through warranty and maintenance,

implementation/installation and relocation services.

NECAM will use commercially reasonable best efforts to provide next business day on-site service provided call for

support is received by 3:00pm, PST. NECAM is not responsible for service calls missed outside the control of

NECAM. If your location is outside of a NECAM authorized third party provider’s service coverage area, the

response time may be longer and/or an additional travel charge may be assessed. In some cases, on-site service may

not be available. All service response times are contingent upon parts availability.

Standard SigmaBlade Server Warranty

Installation Service

NEC installation services are suggested when implementing an

NEC Express5800 SigmaBlade Server. Installation services

are fee-based and will be cond ucted by an NEC Sys tems

Engineer (SE) and or a Certified NEC Service Provider.

■

Requires preplanning for installation by NECAM and the

Customer. An Installation Site Preparation Guide will be

delivered and agreed upon between the Customer and

NECAM prior to installation. This document will provide

an outline of the installation plans and processes.

■

Installation will take a minimum of one (1) day on-site at

the customer location. Installatio n includes; Hardware,

Operating system, network connection, configuration and

administrator training. Anything beyond the one (1) day will

require additional fees.

Relocation Service

NEC Relocation services are available as a fee-based service

delivered by an NEC SE and or a Certified NEC Service

provider to help Customers protect their IT investments by

reducing risks, including minimal downtime, that are kno wn to

be associated with relocation.

■

NECAM or the Authorized ser vice provider will work with

the Customer to assist with planning and coordination of the

move.

■

Damage caused by relocation without the assistance of NEC

is not covered under this warranty program. Please refer to

section “What is Covered and What is No t Covered ” for

more infor mation.

■

Servers moved witho ut the assistance of NEC may require

recertificatio n to validate warranty.

■

The original shipping carton should be retained for limiting

risks associated with relocation.

Registered Limited Warranty

NEC Corporation of America warrants this Product to be free

from defects in material and workmanship, and agrees to repair

or replace any part of the enclosed unit that proves defective

under these terms and conditions.

If service requires the replacement o f any parts, components,

or modules, the replacement items become the property of

Customer and the replaced items become the property of

NECAM. The warranty period for the Machine is from its

original Date of Installation; the date on the invoice is

considered the Date of Installation unless NEC notifies you

otherwise.

NECAM may use new, used, serviceable, or reconditioned

parts, components, or modules that are in good working order

as replacements. Replacement items shall be of like kind and

quality of those replaced. Spare parts are warranted for ninety

(90) days. Hard Drives must be purchased fro m NEC in order

to be warranted and serviced by NEC.

If yo u do not register your Server with NECAM, you will be

required to present proof of purchase as evidence of your

entitlement for warranty service. Please retain your proof of

purchase with yo ur records.

Who is Protected?

This warranty may be enforced only by the original purchaser

of the Product and is not transferable.

What is Covered and What is Not Covered?

Except as specified below, this warranty covers all defects in

material or workmanship in this Product. The following are not

covered by this warranty:

1. Any Product that is not distributed in the U.S.A. or Canada

by NEC Corporation of America.

2. Any Product that has been removed from the U.S.A. or

Canada.

3. Any Product on which the serial number has been defaced,

modified, or removed.

4. Damage, deterioration, or malfunction resulting from:

♦

Accident, misuse, abuse, neglect, fire, water,

lightning or o ther acts of nature, improper storage,

unauthorized Product modification, or failure to

follow instructions supplied with the Product.

♦

Alteration, repair or attempted repair by anyone not

authorized by NEC Corporation of America.

Standard SigmaBlade Server Warranty

♦

Any shipment, re-shipme nt or physical movement of

the Product (claims must be presented to the

carrier).

♦

Relocation, removal or installatio n or re-installation

of the Product.

♦

Any other cause that does not relate to a Product

defect.

5. Cartons, carrying cases, external cabinets, magnetic or

digital tapes, or any accessories used in co nnection with

the Product.

6. This warranty covers only NEC Corporation of America -

supplied components. Service required as a result of third

party components is not covered under this warranty,

including third-party software even if it is distributed by

NECAM.

What NEC Corporation of America Will and Will Not Pay For

NEC Corporation of America will pay labor and material

expenses for covered items, but NEC Corporation of America

will not pay for the following:

1. Removal or installation charges.

2. Payment of shipping related charge incurred in returning

the Product for warranty repair.

3. Costs of initial technical adjustments (set-up), including

adjustment of user controls.

How You Can Get Warranty Service

Express5800 SigmaBlade Server NECCare Customers in the

continental U.S. and Canada have one phone number to use

when calling for technical support or hardware repair on their

servers. Calls for initiating a repair req uest should be made by

calling 1-866-269-1239. Be prepared to provide the Serial

Number of your server to NEC for quick response.

For easy reference, write down your Serial Number here and

keep this document in a safe and accessible location.

SN________________________________________________

When arranging for a hardware repair, yo u will speak with a

trained technician. The technician will determine whether you

have a hard ware or software failure and then will provide you

with the appropriate service options.

On-Site Service

If NECAM requires and authorizes on-site service for your

repair, a qualified technician will arrive at yo ur location on the

Next Business Day from the time of disp atch. If you are

located outside of a service coverage area, travel charges will

be applied.

All parts or systems returned to NECAM must be accompanied

with an RMA (Return Material Authorization) number. To

obtain an RMA number for product return, please contact the

SigmaBlade Server Technical Support line at: 1-866-269-1239

Limitation of Damages and Implied Warranties

NEC Corporation of America's sole liability for any defective

product is limited to the repair or replacement of the product

at our optio n. NEC Corporation of America shall not be liable

for:

1. Damage to other property caused b y any defects in this

product, damages based upon inconvenience, loss of use of

the product, loss of time or data, commercial loss; or

2. Any other damages of any kind.

NEC CORPORATION OF AMERICA MAKES NO OTHER

EXPRESS WARRANTY WITH RESPECT TO THIS

PRODUCT. ANY IM PLIED WARRANTIES, INCLUDING

BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS, ARE LIMITED IN

DURATION TO THE TERM OF THE EXPRESS

WARRANTY STATED HEREIN. LIABILITY FOR

CONSEQUENTIAL OR INCIDENTAL DAMAGES UNDER

ANY WARRANTIES IS EXCLUDED TO THE EXTENT

PERMITTED BY LAW.

Note:

So me states and provinces do not allow the exclusion

or limitatio n of incidental or consequential damages, so the

above limitation or exclusion may not apply to you. Some

states do not allow limitations on ho w long an implied

warranty lasts, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may also

have other rights that vary from state to state and province to

province.

Note:

All Products returned to NEC Corporatio n of America

for service M U S T have prior approval. This ma y be obtained

by calling 1-866-269-1239.

Standard SigmaBlade Server Warranty

This Product is warranted in accordance with the terms of this

limited warranty. Consumers are cautioned that Product

performance is affected by system configuratio n, software, the

application, customer data, and operator control of the system,

amo ng other factors.

While NEC Corporation of America products are considered to

be compatible with many systems, the specific functional

implementation by the Customers of the product may vary.

Therefore, the suitability of a product for a specific purpose or

application must be determined by the customer and is not

warranted by NEC Corporation of America.

For more informatio n, telephone 1-866-269-1239.

It’s quick and convenient to register your new NEC

Corporation of America Express5800 SigmaBlade Servers so

that you’ll receive the fastest service and support we have to

offer.

It’s easy! To register online go to:

http://www.necam.co m/registration

■

461-00014-000

Tabla de contenidos

Otros manuales de Servidor de NEC

NEC

NEC Express5800/320Fd-MR Manual de usuario

NEC

NEC Express5800/120Rh-1 Manual de usuario

NEC

NEC SVP SERVER - Guía del usuario

NEC

NEC UNIVERGE NEAX 2000 IPS Instrucciones de funcionamiento y mantenimiento

NEC

NEC Express 5800 Series Manual de usuario

NEC

NEC R120d-2E Manual de usuario

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC NEAX 2000IVS2 Manual de usuario

NEC

NEC Express5800/R320c-E4 N8800-173F Manual de usuario

NEC

NEC Esmpro 320La Manual de usuario

NEC

NEC 120Rg-2 Manual de usuario

NEC

NEC EXPRESS 320Lb Manual de usuario

NEC

NEC Express 5800 Manual de funcionamiento

NEC

NEC N8800-155F Manual de usuario

NEC

NEC MH4000 Manual de usuario

NEC

NEC UNIVERGE SL2100 Manual de usuario

NEC

NEC Univerge SV9100 Manual de usuario

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC NEAX 2000IVS2 Manual de usuario

NEC

NEC ServerCare Express5800/FT Manual de lista de piezas

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC N8100-1223F Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario

Planet

Planet NAS-7410 Manual de usuario