NEC LS2400 Manual de usuario

()

■■■■■■■

User’s Guide

Server LS2400

xxx

)LUVW ,VVXH ¥$SULO 

&RS\ULJKW 

1(& &RPSXWHU 6\VWHPV 'LYLVLRQ

3DFNDUG %HOO 1(& ,QF

 0DVVDFKXVHWWV $YHQXH

%R[ERURXJK 0$ 

$OO 5LJKWV 5HVHUYHG

Proprietary Notice and Liability Disclaimer

The information disclosed in this document, including all designs and

materials, is the valuable property of NEC Computer Systems Division,

Packard Bell NEC, Inc. (hereinafter “NECCSD”) and/or its licensors.

NECCSD and/or its licensors, as appropriate, reserve all patent, copyright

and other proprietary rights to this document, including all design,

manufacturing, reproduction, use, and sales rights thereto, except to the

extent said rights are expressly granted to others.

The NECCSD product(s) discussed in this document are warranted in

accordance with the terms of the Warranty Statement accompanying each

product. However, actual performance of each such product is dependent

upon factors such as system configuration, customer data, and operator

control. Since implementation by customers of each product may vary, the

suitability of specific product configurations and applications must be

determined by the customer and is not warranted by NECCSD.

To allow for design and specification improvements, the information in this

document is subject to change at any time, without notice. Reproduction of

this document or portions thereof without prior written approval of

NECCSD is prohibited.

Trademarks

INTEL is a registered trademark of Intel Corporation.

MS-DOS is a registered trademark of Microsoft Corporation.

Pentium is a registered trademark of Inter Corporation.

All other product, brand, or trade names used in this publication are the trademarks or

registered trademarks of their respective trademark owners.

PN: 904475 4/98

Using This Guide xiii

Using This Guide

The LS2400 User’s Guide provides a quick

reference to information about your system. Its

goal is to familiarize you with your system and the

tasks necessary for system configuring and

upgrading.

This guide contains the following information:



Chapter 1, “System Overview” provides an

overview of your system and describes your

system’s major system components. See this

chapter to familiarize yourself with your system.



Chapter 2, “Setting Up Your System” tells you

how to select a site, unpack the system, make

cable connections, and power on your system.



Chapter 3, “Configuring Your System” tells you

how to configure the system and provides

instructions for running the BIOS Setup Utility

and the Symbios Configuration Utility, which is

used to configure SCSI devices in your system.

This chapter also provides information on

system board jumper settings.



Chapter 4, “Upgrades and Options” provides

you with instructions for upgrading your

system with an additional processor, optional

memory, options cards, and peripheral devices.



Chapter 5, “Problem Solving” contains helpful

information for solving problems that might

occur with your system.

xiv Using This Guide



Appendix A, “System Cabling” includes cabling

information for the two onboard SCSI

controllers and the onboard IDE controllers.



Appendix B, “System Setup Utility” provides

information for configuring onboard resources

and add-in boards. It also provides information

on viewing the system event log.



Appendix C, “Emergency Management Port

Console” provides information on a feature that

provides an interface to the Emergency

Management Port (EMP) Console Manager. This

interface allows remote server management via

a modem or direct connection.



“Glossary” defines the standard acronyms and

technical terms used in this manual.



“Equipment Log” provides you with a sample

equipment log for documenting the system

configuration and future updates you may

make to your system.

Using This Guide xv

Text Conventions

This guide uses the following text conventions.

Warnings, cautions, and notes have the following

meanings:

WARNING

Warnings alert you to situations that could

result in serious personal injury or loss of

life.

CAUTION

Cautions indicate situations that can

damage the system hardware or software.

Note: Notes give important

information about the material

being described.



Names of keyboard keys are printed as they

appear on the keyboard. For example, Ctrl, Alt,

or Enter.



Text or keystrokes that you enter appear as

boldface type. For example, type abc123 and

press ENTER.



File names are printed in uppercase letters. For

example, AUTOEXEC.BAT.

xvi Using This Guide

Related Documents

In addition to this guide, the following system

documentation is included with your server either

as electronic files on EXPRESSBUILDER or as paper

copy shipped with your server.



System Release Notes

Release Notes provide you with the latest

information about your system. This

information was not available at the time your

user’s guide was developed.



Getting Started Sheet

The Getting Started Sheet provides several

easy-to-follow steps to become familiar with

your server documentation and to complete

your installation successfully.



Network Operating System Configuration Guide

This guide contains supplemental instructions

needed to install and configure your server

Windows NT v4.0, Novell NetWare v3.12, Novell

NetWare v4.11, and Santa Cruz Operation

(SCO) OpenServer Release 5.04 Network

Operating Systems. This document is intended

to complement the more detailed procedural

documents available from the vendor of the

network operating system.

Using This Guide xvii

Safety Notices



Caution: To reduce the risk of electric shock

which could cause personal injury, follow all

safety notices. The symbols shown are used in

your documentation and on your equipment to

indicate safety hazards.



Warning: Lithium batteries can be dangerous.

Improper handling of lithium batteries may

result in an explosion. Dispose of lithium

batteries as required by local ordinance or as

normal waste if no local ordinance exists.



Warning: The detachable power supply cord is

intended to serve as the disconnect device.



Warning: This equipment has a 3-wire,

grounded power cord. To prevent electrical

hazards, do not remove or defeat the ground

prong on the power cord. Replace the power

cord if it gets damaged. Contact your dealer for

an exact replacement.

xviii Using This Guide



Warning: The DC push-button on/off switch on

the front panel does not turn off the system AC

power. Also, +5vdc is present on the system

board whenever the AC power cord is connected

between the system and an AC outlet. Before

doing the procedures in this manual, make sure

that your system is powered off and unplug the

AC power cord from the back of the chassis.

Failure to disconnect power before opening your

system can result in personal injury and

equipment damage.

In the U.S.A. and Canada, the power cord must be

a UL-listed detachable power cord (in Canada,

CSA-certified), type ST or SJT, 16 AWG, 3-

conductor, provided with a molded-on NEMA type

5-15 P plug cap at one end and a molded-on cord

connector body at the other end. The cord length

must not exceed 9 feet (2.7 meters).

Outside the U.S.A. and Canada, the plug must be

rated for 250 VAC, 10 amp minimum, and must

display an international agency approval marking.

The cord must be suitable for use in the end-user

country. Consult your dealer or the local electrical

authorities if you are unsure of the type of power

cord to use in your country. The voltage change

occurs via a switch in the power supply.

Using This Guide xix



Warning: Under no circumstances should the

user attempt to disassemble the power supply.

The power supply has no user-replaceable

parts. Inside the power supply are hazardous

voltages that can cause serious personal injury.

A defective power supply must be returned to

your dealer.

Otros manuales para LS2400

Tabla de contenidos

Otros manuales de Servidor de NEC

NEC

NEC NECCare Platinum Express5800/A1160 Manual de usuario

NEC

NEC Express5800/R110i-1 Manual de usuario

NEC

NEC NEAX2000 IPS Guía del usuario

NEC

NEC N8100-1429F Manual de usuario

NEC

NEC Express5800/120Rh-2 Manual de usuario

NEC

NEC HX4000 Manual de usuario

NEC

NEC R120d-1E N8100-1955F Manual de usuario

NEC

NEC MC2200 Manual de usuario

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC Express5800/B140a-T Manual de operación y mantenimiento

NEC

NEC Express5800/140Rf-4 Manual de usuario

NEC

NEC Express5800/ftServer Manual de servicio

NEC

NEC Express5800/R320c-E4 Manual de funcionamiento

NEC

NEC Express5800/120Rg-1 Manual de usuario

NEC

NEC Express5800/120Rc-2 Manual de instrucciones

NEC

NEC Univerge SV8100 Manual de usuario

NEC

NEC Express5800/320Lc Manual de usuario

NEC

NEC N8400-086F Manual de usuario

NEC

NEC 320LB EXP351E Manual de usuario

NEC

NEC Express 5800 Manual de usuario

NEC

NEC R320c-E4 Manual de usuario

NEC

NEC 120Rf-2 Manual de usuario

NEC

NEC NEAX2400 ICS Manual del propietario

NEC

NEC Express5800/B120f Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario

Planet

Planet NAS-7410 Manual de usuario