NEC Express5800/120Mc2 series Manual de instrucciones

System Release Notes

Express5800/120Mc2

System Release Notes

PN: 455-01575-002

Proprietary Notice and Liability Disclaimer

The information disclosed in this document, including all designs and related materials, is

the valuable property of NEC Computers Inc. and/or its licensors. NEC Computers Inc.

and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights

to this document, including all design, manufacturing, reproduction, use, and sales rights

thereto, except to the extent said rights are expressly granted to others.

The NEC Computers Inc. product(s) discussed in this document was warranted in

accordance with the terms of the Warranty Statement accompanying each product.

However, actual performance of each such product is dependent upon factors such as

system configuration, customer data, and operator control. Since implementation by

customers of each product may vary, the suitability of specific product configurations and

applications must be determined by the customer and is not warranted by NEC Computers

Inc.

To allow for design and specification improvements, the information in this document is

subject to change at any time, without notice. Reproduction of this document or portions

thereof without prior written approval of NEC Computers Inc. is prohibited.

Trademarks

Windows, Windows NT, and Windows 2000 are registered trademarks of Microsoft Corporation.

Novell and NetWare are registered trademarks of Novell, Inc.

SCO OpenServer is a trademark of The Santa Cruz Operation, Inc.

UnixWare is a registered trademark of The Santa Cruz Operation, Inc.

All other product, brand, or trade names used in this publication are the trademarks or registered trademarks

of their respective trademark owners.

September 2000

NEC Computers Inc.

15 Business Park Way

Sacramento, CA 95828

Express5800/120Mc2

System Release Notes

The Express5800/120Mc2 System Release Notes provide up-to-date information

on your system. These notes also provide additional valuable information about

your system that was not included in the user’s guide.

Please read these notes in their entirety.

CONTENTS

Introduction ............................................................................................................................................3

General Comments.................................................................................................................................3

Advisories...............................................................................................................................................3

ExpressBuilder...................................................................................................................................3

System Element Monitoring...............................................................................................................4

BIOS Setup Utility.............................................................................................................................4

SCO....................................................................................................................................................4

System Hardware...............................................................................................................................5

nec

Express5800/120Mc2 System Release Notes 3

Introduction

These System Release Notes cover the following topics:

!General Comments

!Advisories

General Comments

The following general comments apply to this server.

!Versions of the Network Operating Systems tested and recommended are:

Windows 2000®

Windows NT®4.0 Server with Service Pack 6

Novell® NetWare®5.0

IntraNetWare 4.11 with Support Pack 5b

SCO OpenServer™5.05 with Maintenance Supplement 505A.

UNIXWare®7.1

Advisories

This section contains advisories on the ExpressBuilder, System Element

Monitoring,SCO, and the BIOS Setup Utility.

ExpressBuilder

The following advisory applies to ExpressBuilder.

!If you already have an operating system installed when creating a

maintenance partition, ExpressBuilder will warn you of the existing

partition. If you want to preserve the installed operating system, do not

create the maintenance partition or the existing operating system will be

overlaid by the maintenance partition.

!ExpressBuilder EasySetup will always configure the Windows 2000 TCP/IP

Protocol IP settings to obtain an IP address automatically (DHCP),

regardless of the setting specified in EasySetup.

!After installation, the Windows 2000 Device Manager may show an NEC

GEM SCSI Processor Device and/or an Unknown Device under Other

Devices. The Unknown Device is referenced on the baseboard management

controller. Both of these conditions can be cleared by installing the

ESMPRO Agent.

!The ExpressBuilder DOS ASPI driver is not supported.

4Express5800/120Mc2 System Release Notes

!The Administrator Menu in the System Information Management segment

of the Offline Maintenance Utility is not user accessible.

!ExpressBuilder operates in floppy emulation mode. Your system CD-ROM

drive is designated Drive A and your system diskette drive is Drive B. After

creating the Off-line Maintenance Utility diskette, ExpressBuilder prompts

you to remove the diskette from Drive B. At this prompt, remove the

diskette from your diskette drive.

System Element Monitoring

The following advisory applies to system element monitoring.

!Certain system elements – the disk drive cooling fans, power supply, and

power supply fans – are fully monitored only with a RAID controller

installed in the system.

!ESMPRO cannot monitor the disk drive cooling fans, power supply, and

power supply fans elements directly. However, these elements will be

supported in the next release of ESMPRO Suite.

!When a RAID controller is in use in the system, the Front Panel Power and

Fan Alarm LEDs will function correctly. If the RAID global array manager

is used, it will generate an alert if one of these elements fail. This alert can

be routed by way of ESMPRO to a central monitoring location.

BIOS Setup Utility

The following advisories apply to the BIOS Setup Utility (F2):

!General Help (F1) description states that pressing the ESC or Alt-X keys

exits the BIOS Setup Utility. Pressing either of these keys exits the current

menu and returns you to the previous menu. If you are displaying any one of

the BIOS Setup Utility top level menus, pressing either of these keys takes

you to the Exit Menu.

SCO

The following advisory applies when using SCO 5.05:

!During the installation of SCO or any time thereafter when booting SCO a

warning message may appear as follows:

WARNING: Cannot connect to APM, error 0x0036 System loaded, press

<Return> to start:

To prevent the WARNING message from appearing, boot the system to single-

user Mode. Edit the /etc/default/boot file. Add "apm.check=no" to the end of the

line indicated by the "DEFBOOTSTR=" entry.

Express5800/120Mc2 System Release Notes 5

System Hardware

The following advisory applies to the Plug and Play feature of your server's I/O

expansion boards.

!The Windows 2000 Operating System requires that your server’s PnP O/S

feature be enabled. Before installing the Windows 2000 Operating System,

run the BIOS Setup Utility as described in Chapter 3 of your User’s Guide,

to verify the PnP O/S feature is enabled. Your User’s Guide is included on

ExpressBuilder.

The following advisory applies to the USB ports on your server's external device

connectors.

!The factory standard default value of the USB ports on your server is

"Disabled". To enable them, the USB Controller feature in the Peripheral

Configuration Submenu of the BIOS Setup Utility "BIOS Setup

Configuration Settings" must be changed to "Enabled". Refer to

Chapter 3 of your User’s Guide. Your User’s Guide is included on

ExpressBuilder.

Otros manuales para Express5800/120Mc2 series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Servidor de NEC

NEC

NEC Active Upgrade Express5800/320Fc Manual de usuario

NEC

NEC Express5800/E120f-M Manual de funcionamiento

NEC

NEC Univerge UM8000 Manual de usuario

NEC

NEC EXPRESS5800/120Re-2 Manual de usuario

NEC

NEC NEC Express5800 Series Manual de funcionamiento

NEC

NEC 1000 Series Manual de usuario

NEC

NEC Express5800 120Li Manual de usuario

NEC

NEC Express5800/320Fd-LR Manual de usuario

NEC

NEC ServerCare Express5800/FT Manual de lista de piezas

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC Express5800/120Bb-6 Manual de usuario

NEC

NEC Express5800/320Fd-LR Manual de usuario

NEC

NEC Express5800/R320g-M4 Manual de funcionamiento

NEC

NEC Express 5800 Manual de usuario

NEC

NEC Univerge SV8100 Manual de usuario

NEC

NEC Express5800/320Lc Manual de usuario

NEC

NEC Express5800/320Ma Manual de usuario

NEC

NEC Express5800/A2040c Manual de usuario

NEC

NEC EXP320R Manual de funcionamiento

NEC

NEC Series3800/S120R-2 Manual de usuario

NEC

NEC Express 5800/320Lb-R Manual de usuario

NEC

NEC Express5800/T120d Manual del propietario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario

Planet

Planet NAS-7410 Manual de usuario