NEC Express 456-01721-000 Manual

Read Me First: Unpacking

Express5800/320Fc System Cabinets

NEC Corporation of America

456-01721-000

Notice

The information contained in this document is subject to change without notice.

UNLESS EXPRESSLY SET FORTH IN A WRITTEN AGREEMENT SIGNED BY

AN AUTHORIZED REPRESENTATIVE OF NEC, NEC MAKES NO WARRANTY

OR REPRESENTATION OF ANY KIND WITH RESPECT TO THE INFORMATION

CONTAINED HEREIN, INCLUDING WARRANTY OF MERCHANTABILITY AND

FITNESS FOR A PURPOSE. NEC assumes no responsibility or obligation of any

kind for any errors contained herein or in connection with the furnishing,

performance, or use of this document.

Software described in NEC (a) is the property of NEC and/or its licensees, (b) is

furnished only under license, and (c) may be copied or used only as expressly

permitted under the terms of the license.

NEC documentation describes all supported features of the user interfaces and the

application programming interfaces (API) developed by NEC and/or its licensees.

Any undocumented features of these interfaces are intended solely for use by NEC

personnel and are subject to change without warning.

This document is protected by copyright. All rights are reserved. No part of this

document may be copied, reproduced, or translated, either mechanically or

electronically, without the prior written consent of NEC Corporation of America.

The NEC Corporation of America logo, Express5800/320Fc, and the

Express5800/320Fc logo, are trademarks of NEC Corporation of America.

ActiveService Network is a trademark of Stratus Technologies Bermuda, Ltd. All

other trademarks and trade names are the property of their respective owners.

Manual Name: Read Me First: Unpacking Express5800/320Fc System Cabinets

Part Number: 456-01721-000

Revision Number: 0

Publication Date: August 2007

NEC Corporation of America

10850 Gold Center Drive, Suite 200

Rancho Cordova, CA 95670

-iii-

Contents

Introduction 1

Packaged Cabinet 1

Before Unpacking the Cabinet 3

Moving the Cabinet to the Installation Site 6

Unpacking and Checking the Cabinet 7

Tools Needed to Unpack the Cabinet 8

Removing the Packing Materials 8

Removing the Cabinet from the Pallet 15

Checking the Cabinet and Systems 17

Verifying the Express5800/320FcSerial Number 18

Stabilizing the Systems 19

Disposing of Shipping Materials 20

What Happens Next? 20

System Documentation 20

-iv-

-1-

Introduction

Read Me First: Unpacking Express5800/320Fc Cabinets

describes how to move cabinets that contain these systems to an

installation site and how to unpack them.

Warnings, cautions, and notes in this document convey the

following special information:

WARNING

A warning indicates a situation where failure

to take or avoid a specified action could cause

bodily harm or loss of life.

CAUTION

A caution indicates a situation where failure to

take or avoid a specified action could damage a

hardware device, program, system, or data.

NOTE

A note provides important information concerning

the operation of your system.

Packaged Cabinet

Figure 1 shows a shipping container for a 38U cabinet that

contains one or more systems and optional components. (“U,” for

unit, equals 1.75 inches (in.), or 4.45 centimeters (cm).)

-2-

Figure 1. Cabinet Packaged for Shipping

The cardboard shipping container is secured to a shipping pallet

by exterior shipping straps. (Inside the shipping container, interior

shipping straps secure the cabinet to the pallet.) A ramp for rolling

the cabinet off the pallet is attached to one side of the shipping

container, at the rear of the cabinet. Labels on the cardboard cap

indicate the front and rear of the cabinet.

hsys032

Ramp

Pallet

Tie-down

straps

-3-

Before Unpacking the Cabinet

1. Check the packing list to verify that you have received the

correct shipment.

2. Verify that the Tip-N-Tell and Shockwatch handling indicators

on the outside of the shipping container have not been

activated.

CAUTION

If you received the wrong shipment or a handling

indicator has been activated, do not proceed

with the unpacking. Contact the vendor from

which you purchased your system and the

shipping carrier immediately.

3. Verify that the area through which you must move the cabinet

has adequate clearance, as the following figures indicate:

•Figure 2 shows the dimensions of a packaged 38U

cabinet.

•Figure 3 shows the dimensions of a packaged 24U

cabinet.

•Figure 4 shows the clearances required at the installation

site.

Include the height of the pallet jack when you calculate the

overall cabinet height.

-4-

Figure 2. Dimensions of a Packaged 38U Cabinet

80 in.

(2m)

41 in.

(104.14 cm)

53 in.

(134.62 cm)

5 in.

(12.7 cm)

38U Cabinet

hsys033

-5-

Figure 3. Dimensions of a Packaged 24U Cabinet

Figure 4. Clearances Required at the Installation Site

56.5 in.

(1.435m)

41 in.

(104.14 cm)

53 in.

(134.62 cm)

5 in.

(12.7 cm)

24U Cabinet

hsys034

Cabinet

on Pallet

Pallet Ramp

Unload From

This End

42 in.

(107 cm)

42 in.

(107 cm)

150 in.

(381 cm)

42 in.

(107 cm)

-6-

If the corridor and door dimensions are large enough to

accommodate the unpacked cabinet still tied to its pallet, use a

pallet jack to move it from the delivery site to the installation site,

as described in “Moving the Cabinet to the Installation Site” on

page 6.

If the corridor and door dimensions are too small to accommodate

the unpacked cabinet still tied to its pallet, unpack the cabinet and

unload it from the pallet before you move it to the installation site.

In this case, use the pallet jack to move the unpacked cabinet as

close to the installation site as possible. Then, unpack the cabinet,

remove it from its pallet, and roll it carefully on its casters to the

installation site.

Moving the Cabinet to the Installation Site

WARNING

To avoid personal injury or damage to the

systems or cabinet, two persons are required

to move, unpack, and install a cabinet that

contains Express5800/320Fc systems.

Because of the size and weight of the systems

in cabinets, consider using professional

movers to deliver and move the packaged

units to the installation site.

CAUTION

To prevent or minimize condensation on the

systems’ internal and external surfaces, avoid

exposing the systems to extreme temperature or

humidity changes when moving them to the

installation site. If the systems have been

exposed to extreme temperature or humidity

conditions during transit, or if condensation is

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Servidor de NEC

NEC

NEC UNIVERGE NEAX 2000 IPS Manual de usuario

NEC

NEC UNIVERGE NEAX 2000 IPS Instrucciones de instalación

NEC

NEC Express5800/R110i-1 Manual de usuario

NEC

NEC N8146-43 Manual de usuario

NEC

NEC Express5800/140Rc-4 Manual de usuario

NEC

NEC MH4000 Manual de usuario

NEC

NEC UNIVERGE NEAX 2000 IPS Manual de usuario

NEC

NEC Express5800/R110g-1E Manual de usuario

NEC

NEC Univerge SV8100 Manual de usuario

NEC

NEC Univerge SV8100 Guía del usuario

NEC

NEC NEC Express5800 Series Manual de funcionamiento

NEC

NEC EXP803 Manual de funcionamiento

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC NEAX 7400 IMX Instrucciones de instalación

NEC

NEC NX7700i/5080H-32 Manual de usuario

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC NECCare Platinum Express5800/A1160 Manual de usuario

NEC

NEC Express5800/R120h-2M Manual de funcionamiento

NEC

NEC HX4500 Manual de usuario

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC HX4600 Manual de usuario

NEC

NEC Express5800/120Rh-2 Manual de usuario

NEC

NEC SV8500 Manual del propietario

NEC

NEC HV8600 Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario

Planet

Planet NAS-7410 Manual de usuario