NEC LCD175VXM - MultiSync - 17" LCD Monitor Manual de usuario

To learn about other special offers register online at www.necdisplay.com.

Pour en savoir plus long sur d’autres offres spéciales, inscrives-vous en ligne à www.necdisplay.com.

Para informarse sobre otras ofertas especiales, regístrese en línea en www.necdisplay.com.

User’s Manual / Manuel de l’utilisateur /Manual del Usuario

MultiSync® LCD175VX+™/LCD195VX+™

MultiSync® LCD175VXM+™

Contents

* Remember to save your original box and packing material to transport or ship the monitor.

Your new NEC MultiSync LCD monitor box* should contain the following:

• MultiSync LCD monitor

• Power Cord

• User’s Manual

• Video Signal Cable

• Audio Cable (LCD175VXM+ only)

• Base Stand

• Cable Holder

MultiSync LCD Monitor

User’s Manual

Video Signal Cable

Power Cord

Audio Cable

(LCD175VXM+ only)

Cable Holder

Controls

OSD (On-Screen Display) control buttons on the front of the

monitor function as follows:

OSD displayed Shortcut to bright

adjust window

Button

OSD Off Shortcut to contrast

adjust window Select Input Signal

OSD On

(Icon selection

stage)

Go to Adjustment

stage Cursor moves left Cursor moves right

OSD On

(Adjustment

stage)

Go to Icon selection

stage Decrease Value or

Move highlighed

selection to the left.

Increase value or

Move highlighed

selection to the

right.

Reset operation

Turn MUTE on/off

Open Volume

adjust window.

(LCD175VXM+ only)

SELECT – + 1<->2 / RESET

1. Basic key function

2. OSD structure (e.g. LCD175VXM+)

Main Menu (Icon Select, Analog Input)

Sub Menu (Icon Select)

Press

“SELECT”

key

Press

“SELECT”

key

Adjust by using

“–“ or “ +”.

Main Menu (Adjust)

Sub Menu (Adjust)

Press “SELECT” key

Adjust by using

“–“ or “ +”.

Press “SELECT” key

Press

“–“ or

“ +”

Press

“–“ or

“ +”

Controls - continued

AUDIO (LCD175VXM+ Only)

Controls the volume of the speakers or headphones.

To mute the speaker output, press the

“1<->2 / RESET”

button.

BRIGHTNESS

Adjusts the overall image and background screen brightness.

CONTRAST

Adjusts the image brightness in relation to the background.

AUTO CONTRAST (Analog Input Only)

Adjusts the image displayed for non-standard video inputs.

AUTO ADJUST (Analog Input Only)

Automatically adjusts the Image Position, H. Size and Fine setting.

LEFT/RIGHT (Analog Input Only)

Controls Horizontal Image Position within the display area of the LCD.

DOWN/UP (Analog Input Only)

Controls Vertical Image Position within the display area of the LCD.

H. SIZE (Analog Input Only)

Adjusts the horizontal size by increasing or decreasing this setting.

FINE (Analog Input Only)

Improves focus, clarity and image stability by increasing or

decreasing this setting.

COLOR CONTROL SYSTEMS

Five color presets (9300/7500/sRGB/USER/NATIVE) select the

desired color setting.

The sRGB and NATIVE, color presets are standard and cannot be

changed.

COLOR RED

Increase or decreases Red. The change will appear on screen.

COLOR GREEN

Increase or decreases Green. The change will appear on screen.

COLOR BLUE

Increase or decreases Blue. The change will appear on screen.

TOOL

Selecting TOOL allows you to get into the sub menu.

FACTORY PRESET

Selecting Factory Preset allows you to reset all OSD control settings

back to the factory settings. The “1<->2 / RESET“ button will need to

be held down for several seconds to have effect. Individual settings

can be reset by highlighting the control to be reset and pressing the

“1<->2 / RESET” button.

Controls - continued

OSD Warning: OSD Warning menus disappear with SELECT button.

NO SIGNAL: This function gives a warning when there is no signal present.

After power is turned on or when there is a change of input signal or video

is inactive, the No Signal window will appear.

RESOLUTION NOTIFIER: This function gives a warning of use with optimized

resolution. After power is turned on or when there is a change of input signal

or the video signal doesn’t have proper resolution, the Resolution Notiﬁer

window will open. This function can be disabled in the TOOL menu.

OUT OF RANGE: This function gives a recommendation of the optimized

resolution and refresh rate. After the power is turned on or there is a change

of input signal or the video signal doesn’t have proper timing, the Out Of

Range menu will appear.

EXIT

Selecting EXIT allows you exit OSD menu/sub menu.

LANGUAGE

OSD control menus are available in seven languages.

OSD TURN OFF

The OSD control menu will stay on as long as it is in use. In the

OSD Turn OFF submenu, you can select how long the monitor

waits after the last touch of a button to shut off the OSD control

menu. The preset choices are 10 - 120 seconds in 5 second inter-

vals.

OSD LOCK OUT

This control completely locks out access to all OSD control functions

without Brightness and Contrast. When attempting to activate OSD

controls while in the Lock Out mode, a screen will appear indica-

ting the OSD are locked out. To activate the OSD Lock Out func-

tion, press “1<->2 / RESET“, then “+“ key and hold down simulta-

neously. To de-activate the OSD Lock Out, press “1<->2 / RESET“,

then “+“ key and hold down simultaneously.

RESOLUTION NOTIFIER

If ON is selected, a message will appear on the screen after 30

seconds, notifying you that the resolution is not at optimal resolution.

DDC/CI

Turns on or off the way communication and control of the monitor.

MONITOR INFO

Indicates the model and serial numbers of your monitor.

Monitor

Speciﬁcations MultiSync®

LCD175VXM+ Notes

LCD Module Diagonal :

Viewable Image Size :

Native Resolution

(Pixel Count) :

17.0 inch

1280 x 1024

Active matrix; thin ﬁlm transistor (TFT)

liquid crystal display (LCD); 0.264 mm

dot pitch; 270cd/m2

white luminence;

700:1 contrast ratio, typical

Input Signal Video :

Sync : ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI

Separate sync. TTL Level (Positive/Negative)

Horizontal sync. Positive/Negative

Vertical sync. Positive/Negative

Display Colors 16,7M Depending on display card used.

Maximum Viewing

Angles Left/Right :

Up/Down : 80°/80° (CR>10)

75°/85° (CR>10)

Synchronization

Range Horizontal :

Vertical : 31.5 kHz to 81.1 kHz

56.0 Hz to 76.0 Hz

Automatically

Resolutions

Supported 720 x 400*

:VGA text

640 x 480*

@ 60 Hz to 75 Hz

800 x 600*

@ 56 Hz to 75 Hz

832 x 624*

@ 75 Hz

1024 x 768*

@ 60 Hz to 75 Hz

1152 x 864*

@ 70 Hz to 75 Hz

1152 x 870*

@ 75 Hz

1280 x 960*

@ 60 Hz to 75 Hz

1280 x 1024 at 60 Hz to 75 Hz..................

Some systems may not support all

modes listed.

NEC DISPLAY SOLUTIONS

cites recommended resolution

at 60 Hz for optimal display

performance.

Active Display Area Horizontal :

Vertical : 338.0 mm/13.3 inches

270.3 mm/10.6 inches

Power Supply 100 – 240 V~ 50/60 Hz

Speaker Practical Audio Output 1+1 watts

Current Rating 0.6 - 0.4 A/100-240V

Dimensions 368.0 mm (W) x 379.0 mm (H) x 205.0 mm (D)

14.5 inches (W) x 14.9 inches (H) x 8.1 inches (D

Weight 4.8 kg

10.6 lbs

Environmental

Considerations Operating Temperature :

Humidity :

Altitude :

Storage Temperature :

Humidity :

Altitude :

5°C to 35°C/41°F to 95°F

10% to 80%

0 to 10,000 Feet

-10°C to 60°C/14°F to 140°F

10% to 85%

0 to 40,000 Feet

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear

different. This is normal and necessary for all current ﬂat panel technologies when displaying non-native resolutions full screen. In ﬂat panel

technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution

must be done.

NOTE: Technical speciﬁcations are subject to change without notice.

Specications

Otros manuales para LCD175VXM - MultiSync - 17" LCD Monitor

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de NEC

NEC

NEC JC1402HME Manual de usuario

NEC

NEC E222W - MultiSync - 22" LCD Monitor Manual de usuario

NEC

NEC MultiSync V801 Manual de usuario

NEC

NEC MultiSync LCD2470WVX-BK Manual de usuario

NEC

NEC MultiSync LCD2690WUXi Manual de usuario

NEC

NEC MultiSync LCD1565 Manual de usuario

NEC

NEC LCD175VX - MultiSync - 17" LCD Monitor Guía

NEC

NEC MultiSync LCD195WXM Manual de lista de piezas

NEC

NEC LCD2470WVX - MultiSync - 24" LCD Monitor Manual

NEC

NEC MultiSync PA242W Manual de usuario

NEC

NEC LCD3215 - MultiSync - 32" LCD Flat Panel... Manual de usuario

NEC

NEC MultiSync P403 Manual de usuario

NEC

NEC MultiSync LCD1980SXi-BK Manual de usuario

NEC

NEC MultiSync 20WGX2 Series Manual de usuario

NEC

NEC PlasmaSync 60XR5 Manual de usuario

NEC

NEC MultiSync SC40 Manual de usuario

NEC

NEC MultiSync 1740CX Guía

NEC

NEC MultiSync LCD2060NX Manual de usuario

NEC

NEC FP1350 - MultiSync - 22" CRT Display Manual de usuario

NEC

NEC AS231WM-BK Guía

NEC

NEC SpectraView Reference 271 Manual de usuario

NEC

NEC 50XR4 Manual de usuario

NEC

NEC MultiSync P403 Manual de usuario

NEC

NEC PlasmaSync 50XM4 Guía de configuración rápida

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación

LG M1950D-PZ Manual de usuario