NCS Pearson 5000i Manual de usuario
Installation Guide
For the 5000i®Scanner
NCS Pearson Publication Number 202 234 027
Installation Guide
For the 5000i®Scanner
NCS Pearson Publication Number 202 234 027
Copyright © 1996, 1997, 1998, 2001 NCS Pearson, Inc. All rights reserved. Printed in the United
States of America. No part of this book may be reproduced in any form, or by any means,
without permission in writing from the publisher.
For Users in the United States
This equipment complies with the requirements in part 15 of FCC Rules for a Class A computing
device. Operation of this equipment in a residential area may cause unacceptable interference to
radio and TV reception requiring the operator to take whatever steps are necessary to correct the
interference,
For Users in Canada
The digital apparatus does not exceed the Class A limit for radio noise emission from digital
apparatus set in the Radio Interference Regulations of the Canadian Department of
Communications.
Le présent appareil numérique n'émit pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe A prescit dans le réglement sur le brouillage
radioélectrique édicté par le Ministre des Communications du Canada.
5000iand ScanTools are registered trademarks and Dynamic Deskew, Image ScanTools, Image
Quality Sentry, NCS Pearson, the NCS Pearson logo, and Picture Perfect are trademarks of NCS
Pearson, Inc.
IBM is a trademark of International Business Machines Corporation.
Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.
Revision Log
Tab/Rev Date Description
12/96 Manual Released
019 04/97 Deleted all instances of the term NCS where it refers to the product except
for the first instance in the preface, p. v.
Trademarked the first instance of 5000i, cover page.
Added instructions for installing the Catgut board in the microcomputer,
pp. 16 and 20.
Updated microcomputer installation instructions, pp. 16 and 20.
Updated Figure 3-5 illustrating cable connections, p. 25.
Updated NCS responsibilities for periodic maintenance in the “Customer
Hand-off” section, p. 30.
Added Quick Check to the “Customer Hand-off” section, p. 31.
027 10/01 Changed 5000i™ to 5000i.
Changed NCS to NCS Pearson.
Changed National Computer Systems to NCS Pearson, Inc.
Changed Customer Support Services Division to Customer Support.
Changed Image ScanToolsto Image ScanTools™.
Reformatted manual.
Edited text to reflect changes in hardware and software; e.g. changed Scanex
utility to Scanner Exerciser Utility, updated other menu selections to
reflect software changes.
Updated physical dimensions of 5000i from 33” x 40” x 24” t “57.5” x 48” x
29”, p. 6.
Added note under Cabling, Step 5: “Connect this cable to the 15-pin
connector on the video card in the first expansion slot. Do not connect to
the 15-pin connector on the system board.” p. 17 and under
Cabling, Step 6, p. 22.
Changed “Connect the other end (5 BNCs) to the back of the monitor
labeled” to “Connect the other end (15-pin) to the back of the monitor,”
and removed the list of monitor labels, pp. 18 and 25.
Updated Figure 3-2 illustrating changes in Standalone Board/Connector
Locations, p. 19.
Updated Figure 3-4 illustrating changes in Network Board/Connector
Locations, p. 24.
Added to Cable Part Numbers and Connections Table: “913 406 005, Gender
Changer, HD 15 Female/Female/NA,” p. 25.
Added to Customer hand-off, step 1, “Output Hopper Height Adjustment
Switch – Adjusts the input hopper up or down,” p. 30.
Changed “ImageTool” to “Image ScanTools™,” p. 30.
Changed microcomputer to computer.
Publication Number 202 234 027
iii
iv 5000i Scanner Installation Guide
Preface
This manual describes how to set up and install the NCS Pearson™ 5000i scanner. This manual
does not document how to install and configure the 5000isystem software. 5000iscanner system
software is pre-installed and configured at NCS Pearson.
For information on operating the scanner, refer to the Operator’s Guide for the 5000i
Scanner.
The following components of the system are described in separate manuals:
System Component Manual Title
5000iScanner Operator’s Guide for the 5000i
Scanner
Operator's Quick Reference Card for the 5000i
Scanner
Quick Check Guide for the 5000i
Scanner
Maintenance Manual for the 5000i
Scanner
Parts Manual for the 5000i
Scanner
ScanTools (Windows®) Image ScanTools™ User's Guide
v
vi 5000i Scanner Installation Guide
Table of Contents
1. SCANNER OVERVIEW ............................................................................................... 1
Overview of the Scanner ................................................................................................ 1
Typical Standalone Configuration.................................................................................2
Customer Support........................................................................................................... 3
Technical Support for Hardware Problems....................................................... 3
Technical Support for Software Problems........................................................ 4
2. SCANNER INSTALLATION ........................................................................................ 6
Preparation ...................................................................................................................... 6
Hardware .............................................................................................................. 6
Software ............................................................................................................... 6
Installation ....................................................................................................................... 7
Checking the Installation Site ........................................................................................7
Installing the Scanner..................................................................................................... 9
Unpacking the Scanner....................................................................................... 9
Spares .................................................................................................................. 9
Checking the Voltage........................................................................................ 10
Site Power Wiring Recommendations............................................................. 14
Electrical Requirements ................................................................................... 15
3. INSTALLATION OF COMPUTER AND OTHER PERIPHERALS ............................ 20
Standalone Installation................................................................................................. 21
Computer ........................................................................................................... 21
Work Table .........................................................................................................23
Monitor and Keyboard ...................................................................................... 23
Network Installation ......................................................................................................25
Computer ........................................................................................................... 25
Monitor and Keyboard ...................................................................................... 28
Networking Equipment ..................................................................................... 29
Internal Cable Connections.......................................................................................... 30
vii
Optional Equipment...................................................................................................... 33
System Printers................................................................................................. 33
Bar Code Reader ............................................................................................... 34
4. SCANNER CHECKOUT............................................................................................ 36
Scanner Checkout Procedures.................................................................................... 36
System Software ........................................................................................................... 36
System Verification....................................................................................................... 36
Requirements .................................................................................................... 36
5000i Scanner System Software ...................................................................... 38
Customer Hand-off ....................................................................................................... 38
INDEX ............................................................................................................................. 41
viii 5000i Scanner Installation Guide
Tabla de contenidos
