NCR Encrypted MSR Manual de usuario

Kit Instructions

NCREncrypted MSR

7613–K141

Issue B

The product described in this document is a licensed product of NCR Corporation.

NCR is a registered trademark of NCR Corporation. NCR RealPOS is a trademark of NCR Corporation in

the United States and/or other countries. Other product names mentioned in this publication may be

trademarks or registered trademarks of their respective companies and are hereby acknowledged.

Where creation of derivative works, modifications or copies of this NCR copyrighted documentation is

permitted under the terms and conditions of an agreement you have with NCR, NCR's copyright notice

must be included.

It is the policy of NCR Corporation (NCR) to improve products as new technology, components,

software, and firmware become available. NCR, therefore, reserves the right to change specifications

without prior notice.

All features, functions, and operations described herein may not be marketed by NCR in all parts of the

world. In some instances, photographs are of equipment prototypes. Therefore, before using this

document, consult with your NCR representative or NCR office for information that is applicable and

current.

To maintain the quality of our publications, we need your comments on the accuracy, clarity,

organization, and value of this book. Please use the link below to send your comments.

EMail: FD230036@ncr.com

Copyright © 2017–2021

By NCR Corporation

Global Headquarters

864 Spring St NW

Atlanta, GA 30308

U.S.A.

All Rights Reserved

Revision Record

Issue Date Remarks

AFeb 2017 First Issue

NCREncrypted MSR

Introduction

This kit provides an Encrypted MSR for the RealPOSXR3 and XL15.

Kit Content

2 7613-K141 NCR Encrypted MSR

7613/5915 InstallationProcedure

1. Remove the MSR blank plate.

a. Detach the bottom side first using a flat screwdriver.

b. Unlatch the top side of the blank plate.

2. Connect the MSRcable connector to the USBextension cable of the display.

7613-K141 NCR Encrypted MSR 3

3. Gently push the excess cables into Port A recess.

4. Hook the Encrypted MSR to the Back Housing and snap into place.

4 7613-K141 NCR Encrypted MSR

5. Secure the MSRwith screw (1).

Tabla de contenidos

Otros manuales de Terminal de pago de NCR

NCR

NCR Verifone UX100 Manual

NCR

NCR OPTIC 12 Manual de usuario

NCR

NCR EasyPoint 7401 Instrucciones de funcionamiento

NCR

NCR 7454 Instrucciones de funcionamiento

NCR

NCR 7358-K121 Manual de usuario

NCR

NCR 5945 Manual de usuario

NCR

NCR 7454 Manual de usuario

NCR

NCR Retrofit OPTIC 5 Touch Manual de usuario

NCR

NCR 7454 Manual de instalación

NCR

NCR FastLane SelfServ 7358-K112 Manual de usuario

NCR

NCR FastLane SelfServ Checkout 7358 Manual

NCR

NCR RealPOS 30 Manual de usuario

Manuales populares de Terminal de pago de otras marcas

PAX

PAX D180SRF Manual de usuario

LinkPoint

LinkPoint AIO Manual de usuario

Moneris

Moneris hispeed 6200 Manual de usuario

Moneris

Moneris iWL220 Manual de usuario

Ingenico

Ingenico iUC280 Manual de usuario

Ingenico

Ingenico Tetra Move/5000 Manual de usuario

Ingenico

Ingenico iWL250B Manual de usuario

Optimum

Optimum M4230 Manual de usuario

Triton

Triton RL5000 Manual de usuario

Ingenico group

Ingenico group Lane/8000 Manual de usuario

Gilbarco

Gilbarco FlexPay IV CRIND Manual de instalación y operación

Infinite Peripherals

Infinite Peripherals Infinea Tab Lite Manual de usuario

PAX

PAX S920 Manual de usuario

Ingenico

Ingenico iCT220, iCT250 Manual de usuario

dejavoo

dejavoo Z Series Manual de usuario

VeriFone

VeriFone VX 520 Series Manual de usuario

Optomany

Optomany axept S900 Manual de usuario

Skyzer

Skyzer iWL252 BLUETOOTH Manual de usuario