NCD Xplora Series Manual de usuario

Installing Your
Explora Family
System
Part Number 9300385 Rev A
November, 1995
Network Computing Devices
350 North Bernardo Ave.
Mountain View California 94043
1
2
3
4
5
6
About the
Explora Family
Explora
Product Line
Basic
Installation
Selecting
Screen
Resolution
Installing
Optional
Equipment
Pinout
Diagrams
7Specifications
8Trouble-
shooting

Warnings and Certifications
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
This digital apparatus does not exceed the Class A limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Depart-
ment of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les lim-
ites applicables aux appareils numériques de la classe A prescrites dans le Règlement
sur le brouillage radioélectrique édicté par le ministère des Communications du Cana-
da.
Declaration of Conformity
Manufacturer’s Name: Network Computing Devices, Inc.
Manufacturer’s Address: 350 N. Bernardo Ave, Mountain View, CA 94043
Type of Equipment: X-Terminal
Model No.: Xplora and Xplorapro family of System Bases and Systems
Application of Council Directives: 89/336/EEC, 73/23/EEC
Standards to which Conformity is Declared: EN 55022, EN 50082-1, EN 60950
Importer’s Name: Network Computing Devices (UK) Limited
Importer’s Address: Unit 10, Grove Park 2, Waltham Road, White Waltham, Maiden-
head Berkshire, England SL6 3LW
We hereby declare the equipment specified above conforms to the above Directives and
Standards.
____________________________________________________
Andrew Hall, Director, Technical Services Northern Europe, NCD (UK) Ltd.,August
1995

3
1
About the Explora Family
The Explora family consists of a base unit, several different monitors, a
mouse, and several keyboards. The base unit can be purchased alone
or with a monitor. The base supports many standard VGA or SVGA
third party monitors.
Explora Family Features
The Explora bases are advanced, small- signature X terminals that
include the following features:
•VGA/SVGA monitor support
•PS/2 mouse support
•Multiple keyboard choices
•Serial (RS-232 C) connection
•Parallel connection
•Externally accessible PCMCIA card slot
•Built-in twisted-pair and/or thin Ethernet connections (depending on
model)
The base is ergonomically designed with as small a footprint as
possible, making it ideal for environments where space is at a
premium. Table 1 lists the physical dimensions of the base.
Table 1: Explora Dimensions
Dimension Explora
Height 1.625 inches (4.13 cm)
Width 7.25 inches (18.42 cm)
Depth 10.00 inches (25.40 cm)
Weight 1.51 pounds (0.686 kg)
N C D
N C D
Xxx

4
2
Explora Product Line
After unpacking the shipping cartons, make sure you have all of the
standard components and any optional components you may have
ordered. If any components are missing or appear damaged, contact
NCD at (415) 694-0650 or your representative immediately.
Note Optional equipment installation is covered in Section 5.
* Optional Single Power Source Attachment, see Section 5.
COLOR
13
2
N C D
N C D
N C D
N C D
Xxx
PCMCIA
Explora
Security Device
with Screw
(Optional)
Wall Mounting
Bracket with
Screws (Optional)
Power Supplies and
Accessories
Keyboard
PS/2 Mouse
Monitor
Memory SIMM
(Optional)
PCMCIA Cards
(Optional)
*

5
3
Basic Installation
Controls and Indicators
The controls and indicators are the same for all the models in the
Explora family.
Note If you are installing additional memory in your base, do not
complete the basic installation until you have installed the
memory. Go now to Section 5, Installing Optional Equipment.
Connections
Note Explorapro has both twisted-pair and thin Ethernet connectors
for making network connections. Explora has only a twisted-
pair connector.
N C D
N C D
N C D
N C D
Xxx
Power
Switch
Power
Indicator
Network
Activity
Indicator
Front View Back View
Twisted-Pair Link
Look Through Hole
WARNING
WARNUNG
Before connecting any cables, make sure the power is off.
Vor de m Anch l ießen von Kabeln sicherstellen, daßdie Stromzufuhr unterbrochen ist.
WARNING
WARNUNG
Do not connect any power cords to the Explora unless the monitor, keyboard, and
mouse are properly connected.
Kein Netzkabel in den Explora stecken, sofern Monitor, Tastatur und Maus nicht ord-
nungsgemäß angeschlossen sind.

6
3
Look at the appropriate diagram for the model you have and make the
following connections: keyboard, mouse, monitor, network, and your
serial and/or parallel device. Connect the power supply last.
Caution
Do not set the monitor on top of the base. The base is not designed
to hold a monitor.
Explora
Mouse
Keyboard
Power Supply
Monitor Parallel Serial Network
Connection
Twisted-pair
Explorapro
Mouse
Keyboard
Power Supply
Monitor Parallel Serial Network
Connection*
Twisted-pair
Thin
Ethernet
* Make only one network
connection at a time.

7
4
Selecting Screen Resolution
When the terminal is first turned on, the display uses a default
resolution, depending on the installed video cable and monitor
capabilities. This setting may not provide the highest resolution and
refresh rate your monitor supports. See your monitor documentation
for supported resolutions.
A menu is provided for selecting the correct resolution and changing
the DPI (dots per inch) setting for the monitor. You access this menu
through the Boot Monitor.
To change the resolution:
Caution
Selecting the wrong screen resolution can damage your monitor.
Make sure your selection is supported by your monitor.
1. Turn on the system or reboot (if the system is already on).
2. After the Boot Monitor title and version number, messages similar
to the following appear. Press the Escape key to interrupt the
booting process.
Searching for IP address...
Using IP address
IP address of terminal
Searching for subnet mask
Using subnet mask
subnet mask
...........................loaded
3. Depending on how the terminal’s booting parameters are set, you
may see more than one of these messages. Press Escape each time
one of them appears. This aborts the load process and puts the
system into the Boot Monitor (> prompt).
4. When you’re in the Boot Monitor (> prompt), press the Setup
key (or type se). The Main menu appears.
Esc
Setup
Help
Keyboard Monitor Network Boot Done
Help
Use the arrow keys to navigate through the menus
listed across the top of the screen:
Left, Right Go to previous or next menus.
Up, Down Go to previous or next field
within the current menu.
Control-U Delete to beginninbg of line.
Escape Restore previous value.
Help for each field within a menu is shown along the
bottom of the screen.
Exit via the Done menu at the right of the screen.

8
4
5. Use the right arrow key to select Monitor. The screen now dis-
plays the available monitor resolution settings
6. Press the up or down arrow keys to select the correct
setting for your monitor.
7. Press the right arrow key to select Dots Per Inch.
→
Help
Keyboard Monitor
Network Boot Done
Dots Per Inch
XX
Press Shift-T to rest new monitor parameters, Esc to stop test
640 x 480 60Hz
640 x 480 72Hz
640 x 480 75Hz
800 x 600 60Hz
800 x 600 72Hz
800 x 600 75Hz
1024 x 768 60Hz
1024 x 768 70Hz
1024 x 768 75Hz
Monitor Resolution
Supported
resolutions for
Explora
Help
Keyboard Monitor
Network Boot Done
Monitor Resolution
640 x 480 60Hz
640 x 480 72Hz
640 x 480 75Hz
800 x 600 60Hz
800 x 600 72Hz
800 x 600 75Hz
1024 x 768 60Hz
1024 x 768 70Hz
1024 x 768 75Hz
1152 x 900 66Hz
1152 x 900 76Hz
1280 x 1024 70Hz
1280 x 1024 72Hz
1280 x 1024 75Hz
Dots Per Inch
XX
Press Shift-T to rest new monitor parameters, Esc to stop test
Supported
resolutions for
Explorapro
↓
↓
→

9
4
8. Enter the numerical value that matches the resolution you have
selected. (Or leave the default value.)
9. To test the selected refresh rate, press Shift -T .
Running this test generates a cross hatch test screen pattern. If the
refresh rate you select is not supported by the monitor, the test
pattern does not appear.
10. Press any key to return to the Monitor menu.
11. Press the right arrow key to select Done. The following menu
appears.
12. Use the up or down arrow keys to select one of the options
from the Done menu.
Reboot -- saves the settings you changed and reboots the system.
Exit -- saves the settings and returns you to the Boot Monitor.
Undo -- reloads the parameters that were in effect when you
entered the menus. The system continues to display the menus.
13. Press .
If you save your selection, you do not need to repeat this procedure
unless you change to a different type or size of monitor.
Shift Τ
→
Help
Keyboard Monitor
Network Boot Done
Save Parameters and reboot. Press <Return> to confirm
Exit
Undo
Done
Reboot
↓
↓
Return

10
5
Installing Optional Equipment
The following optional equipment is available for your Explora.
Note If you are adding additional memory, do so before doing the
basic installation in the previous section.
Installing Additional Memory
You can add additional memory to your unit at any time. It can be
purchased from NCD or other vendors. Contact NCD Technical
Support for information about approved vendors. Only SIMMs
supplied by NCD are covered under NCD’s warranty.
Notes Explora has 4 MB of built-in memory and 1 MB of built-in
display memory.
Explorapro has 8 MB of built-in memory and 2 MB of built-in
display memory.
You can add one additional SIMM to Explora, and two
additional SIMMs to Explorapro.
Table 2 lists the SIMM specifications.
PCMCIA
Wall Mount
Bracket
Security Device
PCMCIA card Audio PCMCIA
Card with Audio
Interface Module
Memory SIMM
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de De oficina de NCD



















