Nauticam 86237 Manual de usuario
Current as of 2022-7-11
INSTRUCTION MANUAL
for
FLOAT COLLAR FOR MWL-1
PN# 86237
FOREWORD
Thank you for your purchase of a NAUTICAM product.
At NAUTICAM, we pride ourselves in the ability to recognize
the requirements of professional as well as amateur underwa-
ter photographers and fulfill them through the innovative de-
signs of our products. We strive to achieve a high level of
user-friendliness by allowing stress-free installation and easy
operation of all important functions of the camera.
Each product is individually inspected and water pressure
tested to ensure optimum quality.
Please read this manual carefully before using the product,
this will maximize its performance as well as its lifetime.
Product illustration used in this manual may differ from actual
product.
Current as of 2022-7-11
WARRANTY
All NAUTICAM Housing Products and Viewfinders are war-
ranted against any material and manufacturing defects for
two years from the date of purchase for consumer use. NAU-
TICAM Optical Accessories are warranted against material
and manufacturing defects for a period of one year, and HDMI
cables carry a year warranty.
This warranty only applies to products purchased from author-
ized NAUTICAM dealers and does not extend beyond the orig-
inal retail purchaser.
To return your product for service, please contact your re-
gional authorized service center(s). Please note that this war-
ranty only applies when the product is purchased in the terri-
tory where the service center is located.
NAUTICAM does not hold responsibility for damage, of any
nature, to any equipment used with and/or placed within our
products.
NAUTICAM accepts no liability for any loss of captured im-
ages or the inability to capture images even if it is due to the
malfunctioning of our products.
Unauthorized modifications and/or repairs of our products
will automatically invalidate the warranty.
PRECAUTIONS
After installation of the port combo, please make sure the
O-ring (s) are free from debris and uneven surface issues.
A water-tight/vacuum test without the camera inside the
housing is highly recommended after the changing of port
and O-ring(s).
Do not use lubricants from other brands with the silicone
rubber O-ring on this housing, only use the lubricant pro-
vided by NAUTICAM.
Discontinue use immediately should you notice any leak-
age.
Do not open the product in a wet or sandy environment.
Protect the interior from moisture and debris in order to
prevent malfunction or leakage.
Defective products should be shipped to our distributors
for service, unauthorized disassembling and/or modifica-
tions could result in malfunction or leakage.
Do not travel by air with the port sealed to the housing.
Current as of 2022-7-11
SPECIFICATIONS
Outer diameter x Length
DIA160 mm x 67 mm
Weight in air
1,538g (incl.MWL-1)
Buoyancy in water
Negative 60g (incl.MWL-1)
Body construction
Hard-anodized aluminum alloy
Depth rating
100m
Compatible lens
86201 Macro to Wideangle
Lens 1 (MWL-1) 150 deg. FOV
with full frame 60mm macro
lens
CARE AND MAINTENANCE
Soak the product in fresh water after each salt water use
After each day of diving, it is advisable to have both the
housing main O-ring and port O-ring removed from its
groove with the O-ring remover and inspected for damage.
Also check that the O-ring retains its original circular shape;
never stretch the O-ring excessively or remove it with a
sharp object. The O-ring groove should be cleaned to en-
sure it is free from any salt deposit or foreign material;
lightly coat the O-ring with the provided lubricant before re-
installing it in the groove. A damaged O-ring should be dis-
carded immediately and replaced only with one that is pro-
vided by NAUTICAM.
Please refer to "Nauticam Product Care and Maintenance
Guide" for more details.
Current as of 2022-7-11
IDENTIFICATION OF PARTS
PREPARATION OF THE PRODUCT
1. After verifying that the sealing silicon O-ring is in good con-
dition, lightly coat it with the lubricant provided and wipe
away the excess.
2. Make sure the O-ring groove is free from any foreign mate-
rial; the groove can be cleaned with the aid of a microfiber
cloth.
3. Carefully place the port O-ring into the groove, ensuring that
it lays flat and inside the entire groove.
4. Inspect the O-ring again, make sure there is no lint or hair
on the O-ring
5. Lift up the entire system and inspect where the housing
back and port meet the housing. There should be a thin, uni-
form gap with no extruded O-ring.
Float collar
4x thumb screws
Shade
Shade cover ring
Shade base ring
Base fixing ring
Lens cap
4x M3 screws
Current as of 2022-7-11
PREPARATION BEFORE INSTALLING 86237
2. Then, remove the lens shade, 2x shade fixing ring
pieces, and bayonet mount ring as shown above.
1. Unscrew 4x screws from a shade of MWL-1and 7x
screws from bayonet mount ring of MWL-1
Current as of 2022-7-11
INSTALLING 86237 ON MWL-1
1. Mount shade base ring on MWL-1 as shown above.
Make sure the two O-rings as shown in blue into the
groove, ensuring that it lays flat and inside the entire
groove.
2. Gently push the shade base ring downwards to fit on the
MWL-1 as shown above.
MWL-1
Current as of 2022-7-11
4. Tighten them by using 4x thumb screws.
3. Mount base fixing ring under the shade base ring as
shown above.
Current as of 2022-7-11
6. Place the MWL-1 downward, and install the float collar
as shown above. Gently push the float collar towards
the MWL-1 until it cannot go any further.
Make sure the O-ring of the float collar as shown in blue
into the groove, ensuring that it lays flat and inside the
entire groove.
5. Mount a shade of 86237 as shown above.
Current as of 2022-7-11
7. Re-attach the bayonet mount ring of the MWL-1
as shown above
If 86221/86222 Flip holder for MWL-1 is needed,
attach the M67 adaptor ring of 86221/86222 in-
stead.
8. And tighten with 7x screws of the bayonet
mount ring.
Current as of 2022-7-11
9. Mount the shade cover ring on the shade as shown
above.
And after turn the shade to a desired location, tighten
it with 4 x M3 screws provided
To un-mount the float collar from the lens, reverse the
above steps.
Tabla de contenidos
Otros manuales de Accesorios para cámaras de Nauticam
Nauticam
Nauticam NA-A7IV Manual de usuario
Nauticam
Nauticam NA - R5C Manual de usuario
Nauticam
Nauticam NA-A7C Manual de usuario
Nauticam
Nauticam NA-A2020 Manual de usuario
Nauticam
Nauticam NA-503-H Manual de usuario
Nauticam
Nauticam 37169 SFE28135-Z Manual de usuario
Nauticam
Nauticam 16335 Manual de usuario
Nauticam
Nauticam Atomos shogun Manual de usuario
Nauticam
Nauticam NA-EM10IV Manual de usuario
Nauticam
Nauticam N1855AFP-Z Manual de usuario
Nauticam
Nauticam 26306 Manual de usuario
Nauticam
Nauticam NA - R3 Manual de usuario
Nauticam
Nauticam EEF60-F Manual de usuario
Nauticam
Nauticam NA-GFX100 Manual de usuario
Nauticam
Nauticam NA-LX100 Manual de usuario
Nauticam
Nauticam 19569 Manual de usuario
Nauticam
Nauticam NA-XZ1 Manual de usuario
Nauticam
Nauticam NA-EM10III Manual de usuario
Nauticam
Nauticam NA-Z50 Manual de usuario
Nauticam
Nauticam P1442X-PZ Manual de usuario
