National Instruments SCXI-1362 Manual de usuario

National Instruments SCXI-1362 Manual

Get Pricing & Availability at

ApexWaves.com

Call Today: 1-800-915-6216

Email: sales@apexwaves.com

https://www.apexwaves.com/modular-systems/national-instruments/scxi/SCXI-1362

National Instruments™,NI

™,ni.com

™, and SCXI™are trademarks of National Instruments Corporation. Product and company names mentioned herein

are trademarks or trade names of their respective companies.

INSTALLATION GUIDE

SCXI-1362 ADAPTER KIT

This guide explains how to unpack, install, and clean the SCXI-1362

adapter kit. With the SCXI-1362 adapter kit, you can connect the NI 4021

or NI 4060 to the following switch modules: SCXI-1160, SCXI-1161,

SCXI-1163R, SCXI-1190, SCXI-1191, or SCXI-1192.

The following connections are possible using the SCXI-1362 kit:

• Use the SH9MD-AUX cable to connect the digital communication

signals from the NI 4021 or NI 4060 to the AUX IN connector of the

SCXI-1362.

• In SCXI multichassis configurations, use a SH9MD-AUX cable to

extend the digital communication signals to the next SCXI chassis.

Note The maximum total cable length from the NI 4021 or NI 4060 to the farthest chassis

should not exceed 10 meters.

Checking The SCXI-1362 Adapter Kit Contents

Make sure the SCXI-1362 kit includes the following components:

❑One SCXI-1362 adapter

❑One SH9MD-AUX cable (round, 9-pin DIN connector)

❑Two small screws

Note If you ordered only the SCXI-1362 adapter, the kit should include the backplane

adapter but no cables.

You must provide the following:

❑SCXI chassis

❑SCXI-1160, SCXI-1161, SCXI-1163R, SCXI-1190, SCXI-1191,

and/or SCXI-1192

SCXI-1362 Adapter Kit Installation Guide 2 ni.com

❑SCXI controller (NI 4021 or NI 4060)

❑1/8 in. Phillips screwdriver

Unpacking

The SCXI-1362 is shipped in an antistatic package to prevent electrostatic

damage to the device. Electrostatic discharge can damage several

components on the device.

Caution Never touch the exposed pins of connectors.

To avoid such damage in handling the device, take the following

precautions:

•Ground yourself using a grounding strap or by holding a grounded

object.

•Touch the antistatic package to a metal part of your computer chassis

before removing the device from the package.

Remove the device from the package and inspect the device for loose

components or any sign of damage. Notify National Instruments if the

device appears damaged in any way. Do not install a damaged device

into your computer.

Store the SCXI-1362 in the antistatic envelope when not in use.

Safety Information

Cautions To meet EMC/EMI cooling and safety compliance requirements, the SCXI-1362

device must be installed in a chassis with the covers and chassis filler panels properly

installed.

Do not operate the device in an explosive atmosphere or where there may be flammable

gases or fumes.

Do not operate damaged equipment. The safety protection features built into this device

can become impaired if the device becomes damaged in any way. If the device is damaged,

turn the device off and do not use it until service-trained personnel can check its safety.

If necessary, return the device to National Instruments for service and repair to ensure that

its safety is not compromised.

Do not operate this equipment in a manner that contradicts the information specified in this

document. Misuse of this equipment could result in a shock hazard.

©National Instruments Corporation 3 SCXI-1362 Adapter Kit Installation Guide

Do not substitute parts or modify equipment. Because of the danger of introducing

additional hazards, do not install unauthorized parts or modify the device. Return the

device to National Instruments for service and repair to ensure that its safety features

are not compromised.

Yo u must insulate all of the signal connections to the highest voltage with which the

SCXI-1362 can come in contact.

Connections, including power signals to ground and vice versa, that exceed any of the

maximum signal ratings on the SCXI device can create a shock or fire hazard, or can

damage any or all of the boards connected to the SCXI chassis, the host computer, and the

SCXI device. National Instruments is not liable for any damages or injuries resulting from

incorrect signal connections.

Clean the module and accessories by brushing off light dust with a soft non-metallic brush.

Remove other contaminants with a stiff non-metallic brush. The unit must be completely

dry and free from contaminants before returning it to service.

The adapter must be used with a UL-listed SCXI chassis.

Installing the SCXI-1362 Adapter Kit

Refer to Figure 1 when installing the SCXI-1362 adapter kit. To install the

SCXI-1362 kit, complete the following:

1. Power off the computer and SCXI chassis.

2. Install the SCXI modules in the SCXI chassis following the

instructions in the module user manuals. When installed, the back

of the SCXI module is not flush with the back of the SCXI chassis.

3. Install the SCXI-1362 adapter through the chassis into the rear of the

SCXI module. When installed, the SCXI-1362 adapter is flush with the

back of the SCXI chassis. Refer to Figure 1.

4. Using the two screws included in the kit, secure the SCXI-1362

adapter into the threaded strips in the rear of the SCXI chassis.

5. Connect one end of the SH9MD-AUX cable to the AUX IN connector

of the SCXI-1362 adapter.

6. Connect the other end of the cable to the AUX I/O connector of the

switch controller.

SCXI-1362 Adapter Kit Installation Guide 4 ni.com

Figure 1. Installing the SCXI-1362 Kit

1 SCXI Chassis

2 SCXI-1362 Adapter

3SmallScrew

4 AUX IN Connector

5 AUX OUT Connector

6 SH9MD-AUX Cable

FUSE

PULL

LV ANALOG

FROM

DMM

CHASSIS

TO NEXT

CHASSIS

AUX

OUT

©National Instruments Corporation 5 SCXI-1362 Adapter Kit Installation Guide

Installing the SCXI-1362 in a Multichassis System

Refer to Figure 2 when installing the SCXI-1362 adapter kit in a

multichassis system. To install the SCXI-1362 adapter kit in a

multichassis system, complete the following:

1. Repeat steps 1 through 5 of the Installing the SCXI-1362 Adapter Kit

section.

2. Connect the other end of the SH9MD-AUX cable to the AUX OUT

connector of the previously installed SCXI-1362 adapter.

3. Repeat steps 1 and 2 for any additional SCXI-1362 adapter kits.

Figure 2. Installing SCXI-1362s in a Multichassis System

1 Chassis 1

2 SCXI-1362 Adapter

3 SH9MD-AUX Cables

4 Chassis 3

5 NI 4021 or NI 4060

6 Chassis 2

TO NEXT

CHASSIS

FROM

DMM

CHASSIS

AUX

OUT

LVANALOG

FROM

DMM

CHASSIS

TO NEXT

CHASSIS

AUX

OUT

LVANALOG

FROM

DMM

CHASSIS

TO NEXT

CHASSIS

AUX

OUT

SCXI-1362 Adapter Kit Installation Guide 6 ni.com

Safety

Designed in accordance with IEC 61010-1, EN 61010-1, UL 3111-1, and

CAN/CSA C22.2 No. 1010.1 for electrical measuring and test equipment.

For use at altitudes up to 2000 meters.

Installation category II1

Pollution degree 2

Electromagnetic Compatibility

EMC/EMI ...............................................CE, C-Tick, and FCC Part 15

(Class A) Compliant

Electrical emissions ................................EN 55011 Class A at 10 m

FCC Part 15A above 1 GHz

Electrical immunity ................................Evaluated to EN 61326-1:1997

A1:1998, Table 1

Note For full EMC and EMI compliance, you must operate this device with shielded

cabling. See the Declaration of Conformity (DoC) for this product for any additional

regulatory compliance information. To obtain the DoC for this product, click

Declaration of Conformity at ni.com/hardref.nsf/. This Web site lists the DoCs by

product family. Select the appropriate product family, followed by your product, and a link

to the DoC (in Adobe Acrobat format) appears. Click the Acrobat icon to download or read

the DoC.

1Category II refers to local level distribution, such as that provided by a standard wall outlet.

Tabla de contenidos

Otros manuales de Adaptador de National Instruments

National Instruments

National Instruments 5783 Manual de usuario

National Instruments

National Instruments SCXI-1349 Manual de usuario

National Instruments

National Instruments NI 6535 Manual de usuario

National Instruments

National Instruments SC-205 Series Manual de usuario

National Instruments

National Instruments SC-2072 Manual de usuario

National Instruments

National Instruments DAQ SC-205X Series Manual de usuario

National Instruments

National Instruments 1483R Manual de usuario

National Instruments

National Instruments NI 9149 Manual de usuario

National Instruments

National Instruments BNC-2110 Manual de usuario

National Instruments

National Instruments BNC-2115 Manual de usuario

National Instruments

National Instruments BNC-2142 Manual de usuario

National Instruments

National Instruments 5762R Manual de usuario

National Instruments

National Instruments BNC-2144 Manual de usuario

National Instruments

National Instruments NI 5751 Manual de usuario

National Instruments

National Instruments SC-205 Series Manual de usuario

National Instruments

National Instruments NI 5791R Manual de usuario

National Instruments

National Instruments SC-205X Series Manual de usuario

National Instruments

National Instruments NI 9147 Manual de usuario

National Instruments

National Instruments TC-2190 Manual de usuario

National Instruments

National Instruments 6584R Manual de usuario

National Instruments

National Instruments USB-6001 Manual de usuario

National Instruments

National Instruments NI 9949 RJ-50 Manual de usuario

National Instruments

National Instruments SC-2042-RTD Manual de usuario

National Instruments

National Instruments SCXI 1346 Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario