NASAJET NJ 805 Manual de usuario
USER
E-mail: info@nasajet.com
www.nasajet.com
MANUAL
NASAJET HANDHELD INKJET PRINTER
MODEL NJ 805 (2018)
GEOTECHTRONICS GMBH
Tutzing, GERMANY
Ve sion:
1.0
Date:
10. Aug. 2018
USER
INTRODUCTION
JET PRINTER MODEL
NJ 805 IS A NON-
CONTACT JET PRINTER
The NasaJet NJ 805 uses TIJ (thermal inkjet) technology to
throw the ink drops on your
products and objects (such as the price produce date and…….). T
his printer is using the HP 45
cartridges which are manufactured at HP factories. As you know these cartridges are pr
esented
in both solvent base and water base models.
These cartridges are able to throw the ink drops
to the 4 milimetre space. The most important advantages of this device are its weight
being
portable and it can print the changable informations on your p
roductions with moving your
hand around.
This picture shows the way of making an ink drop in TIJ.
1
NasaJet NJ 805 – User Manual
SOFTWARE
INSTALLATION
05
USING THE SOFTWARE
06
SETUP THE CARTRIDGE
07
CONTENT
DEVICE ACCESSOIRES
01
DEVICE INPUT & OUTPU
T
0
2
ABOUT THE CARTRIDGE
0
CONNECTING THE DONGL
E
0
4
TROUBLESHOOTING
08
TECHNICAL DATA
09
2
www.nasajet.com
NASAJET NJ 805
DEVICE
ACCESSOIRES
0
1
1
Batte y cha ge
2
Softwa e CD
Dongle
4
RAM eade
5
Mic o SD
6
Inte face cable between
p inte and compute
OUR SERVICES
3
NasaJet NJ 805 – User Manual
DEVICE INPUT & OUTPU
T
02
NASAJET NJ 805
1. SOCKET OF MICRO SD
2. COMPUTER CABLE JACK
. BATTERY HOLDER
6. THE PLACE OF CARTRIDGE
9. THE BATTERY SOCKET AND ITS CABLE
10. STATUS INDICATOR LED
4. COMMAND TRIGGER
5. POWER SWITCH
7. THE PLACE OF HAND STRAP
8. THE PRINTER ROLLICK
11. MESSAGE SELECT PUSH BOTTOM
4 www.nasajet.com
1. CARTRIDGE COMPARTMENT
2. NOZZLES OF THE CHANNEL A
. NOZZLES OF THE CHANNEL B
4. THE CARTRIDGE CONNECTION TO THE ELECTRONIC SOCKET
5. FRAME FOR CARTRIDGE
6. RUBBER INSIDE THE CARTRIDGE FRAME
ABOUT THE CARTRIDGE
0
NASAJET NJ 805
5
NasaJet NJ 805 – User Manual
DONGLE
This dongle should be connected to the
USB port of the computer after
installation of the software as shown
below and if this dongle is not connected
to the computer the software is only
demonstrative (DEMO) and can not
transfer data to microSD and its not ready.
(as shown below some menus are
dimmed and indicate that the menus are
disabled)
CONNECTING THE DONGL
E
0
4
NASAJET NJ 805
HOW TO CONNECT THE USB DONGLE TO THE COMPUTER
SOFTWARE
The menus shown with the red boxes are
dimmed meaning that the dongle is not
connected to the computer or not
detected and these menus are inactive.
6 www.nasajet.com
MS WINDOWS
SOFTWARE INSTALLATIO
N
0
5
NASAJET NJ 805
HOW TO INSTALL THE NASAJET SOFWARE
After installing the hardware lock you can
install the software.
At first put the software CD into the
CD/DVD drive and run the file:
Setup_SA_ Software V3.1 .exe
Please follow the onscreen instructions.
7
NasaJet NJ 805 – User Manual
TOOLBAR COMMANDS
New: By pressing this key a blank page will be created to compose a new message
Open: By pressing this key another screen will open to open one of the existing messages
which are already
designed.
Save : After the message has been drafted or modified it should be used to store it
Save as: Use this option to transfer a copy of the current message to another number message
Copy: Copy an item to memory
Paste: Bring a copied item from memory to the design section
Send to printer
: If you want to send the current message through the serial port directly to the device use this key
which will be explained in the serial communication section
Send to icroSD: After the me
ssage was designed the transfer to the printer should be from a Micro SD or the
same mobile RAM and using this key to send the message to the microSD
Help: If this button is pressed this help file will be opened
Exit: Used to exit the software environment.
With the NasaJet software it is quick and easy to
create your printing templates.
USING THE SOFTWARE
06
NASAJET NJ805
VERSION .1
8 www.nasajet.com
MESSAGE DESIGN TOOLBAR
TEXT
This tool is used to create a textual text (TEXT)
in the message and the result is the typing of
the text typed with the same font and size as it
was in Windows. By touching this key the
section
s in the message edit section will include
the following: font selection font size rotation
display of numbers in Arabic or English filtering
the selected text (this filter will change the
usage of the ink) confirmation cancellation
and delete.
The lower part of the text design is also
included:
Approximate position of the selected text in
millimeters and pixels the selected item
number and the type of item the approximate
number of prints (for the selected text) the
number of text pixels typed the selected text
position shift charts the approximate position
of the mouse in the message design screen is in
milimeter and pixels.
DOTTED TEXT
This tool is used to create a dotted and
unchangeable English text.
Note:
Variable information such as Date Counter
Clock Work shift and….. can not be in a dotted
text paragraph.
Tabla de contenidos
