Nanoxia Deep Silence 1 Revision B Manual de usuario
I. Introducon
• Introducon
• Accessories
• Accessories
II. Installaon Instrucons
1. Installaon of the motherboard
2. Installaon of external drives
2.1 Opcal drives
2.2 Ulizing the external 3.5 inch bay
3. Installaon opons of HDD’s
3.1 Mounng of hard disk drives
3.2 Ulizing the addional 3-bay HDD-cage
3.3 Conversion and removal of the HDD-cages
3.4 Ulizing the 6 x 2.5 inch mounng frame
4. Removing the front panel and the top cover
4.1 Removing the front panel
4.2 Removing the top cover
5. Fan assembly
5.1 Fans in the case front
5.2 Fans under the top cover
5.3 Fan at the boom of the case
5.4 Fan in the side panel
6. The 2-channel fan control
6.1 Connecng the fans to the fan control
6.2 Operaon of the fan control
7. The Air Chimney
8. Installaon of a water cooling
8.1 Installaon of a radiator or compact water cooling behind the front
8.2 Installaon of a radiator or compact water cooling under the top cover
9. The I/O-Panel
III. Support
______________________________________________________________01
_______________________________________________________01
____________________________________________________________01
____________________________________________________________02
______________________________________________________05
________________________________________________05
______________________________________________05
____________________________________06
___________________________________06
_________________________________________________06
____________________________________________07
____________________________07
____________________________08
________________________________09
___________________________10
_________________________________________10
_______________________________________10
____________________________________________10
__________________________________________11
____________________________________________11
___________________________________________12
_________________________________________12
________________________________13
____________________________13
_________________________________________13
_________________________________________________________14
____________________________________________14
______14
____15
________________________________________________________16
______________________________________________________________16
EN
I. Introducon
Congratulaons on the purchase of your new Nanoxia Deep Silence 1 Revision B. We are condent
that you will be delighted by your new PC case for many years to come.
The Nanoxia Deep Silence series has already won more than 100 awards from the internaonal
trade press. The innovave design and the exceponal quality certainly delight experts and
enthusiasts alike.
Based on the suggesons of our customers, our design team has developed meaningful op-
mizaons in the context of product development, which you will nd in the present revision.
For example, our designers have created a novel 6 x 2.5 inch mounng frame, which allows the
space saving and decoupled mounng of up to six 2.5 inch drives.
Many unique features like the Nanoxia Air Chimney and the revised I/O panel are discreetly in-
tegrated into the linear design. In the new revision, the Deep Silence 1 again oers the perfect
combinaon of opmal system cooling and lowest possible noise levels.
Specicaons
Dimensions: 517 x 220 x 532 mm (Height x Width x Depth)
Material: Steel, plascs
External drive bays: 2 x 5,25 inch (tool-free)
1 x 5,25 & 3,5 inch /w 3.5 inch adapter (tool-free)
Internal drive bays: 8 x 2.5/3.5 inch bays (max. 11)
6 x 2.5 inch
Rubber sealings for
tube holes
EPS- 4+4-Pin extension Fan screws Stand-offs for mainboard Screws for
mainboard mounting
Screws for HDD mounting Screws for 3.5 inch
mounting frame
Mounting screws for
2.5 inch HDD/SSD
Mounting screws for PSU Mounting screws for
2.5 inch HDD/SSD (long)
If you are missing any of the items listed above, please contact our customer service
immediately: support@nanoxia-world.com
Accessories
01
Features:
- Watercooling Ready
- Complete customizable soundproong with high quality materials meeng industrial standards
- Air Chimney
- 6 x 2.5 inch mounng frame
- 2 x USB 3.0, 2 x USB 2.0, HD-Audio connectors
- Lateral mounng holes for 120/240 mm radiators under the top
- Tool-free mounng of opcal drives
- Modular HDD-cages
- 8 slots for expansion cards
- Max. VGA length 315 mm (up to 445 mm with upper HDD cage removed)
- Room for CPU coolers with a maximum height of up to 185 mm
- Cable management with rubberized holes in motherboard tray
- Mounng hole for CPU cooler in the motherboard tray
- Stepless fan control for up to 6 case fans
Noise Insulaon
The Nanoxia Deep Silence 1 Rev. B has been developed with the aim of oering the buyer a
low-noise case, while at the same me allow for extremely low system temperatures.
The noise insulaon concept is based on mulple interacng design elements:
The most important part is the large scale lining of the case with sound-absorbing insula-
on materials. These materials are manufactured specically to meet the requirements of the
developers of the Nanoxia Deep Silence case series and act equally against airborne sound and
structure-borne noise.
Included are special rubber seals which can be used to alternavely close the tube holes next to
the PCI slot covers and above the rear chassis fan, in case you should not need them.
Another design element for opmum sound insulaon is the use of two sound-insulated front
doors. The doors are equipped with sound-absorbing foam. Hard drives and power supply are
also decoupled mounted.
The whole concept of sound proong meets the highest expectaons.
02
EN
Venlaon System:
The Nanoxia Deep Silence 1 Rev. B has an integrated venlaon system consisng three Deep
Silence fans and a built-in 2-channel fan controller. A total of up to seven fans can be mounted.
The Deep Silence axial ow fans have been specically opmized for very quiet operaon. The
range of fan speeds and controls was designed to enable each user to adjust the case venlaon
to their own needs.
All air intake openings (front, boom, le side panel) are readily accessible and have easy to
clean dust lters. Behind the lower front door you can nd two „Easy Access“ fan trays, allowing
an easy access to both the dust lter and the front 120 mm fan(s).
The unique Nanoxia Air Chimney makes it easy to adapt the case to your needs. Under extreme
condions you can counteract heat generaon under the top cover by simply opening the
Chimney to allow the heat to escape.
You can also, with the Chimney open, mount addional case fans or a water radiator below the
cover. In this case, both the fan and the case interior are opmally protected against dust and
spills. A circumferenal groove in the contact surface of the Air Chimney serves as addional
Fans:
Front: 2 x 120 mm Nanoxia Deep Silence fan (max. 1,300 rpm)
Rear: 1 x 140 mm Nanoxia Deep Silence fan (max. 1,100 rpm)
Oponal Equipment:
Side panel: 1 x 140/120 mm fan
Case boom: 1 x 120/140 mm fan (demounng of the secondary HDD-cage
mounng rail required)
Case top: 2 x 120/140 mm fan (open Air Chimney advised)
Watercooling-ready
Nanoxia Deep Silence 1 Rev. B is opmally designed for the use of water cooling systems. Thus,
120 or 240 mm radiators or compact water cooling soluons can be accommodated both behind
the front and under the top cover.
Top cover: 120/240 mm radiator
The case cover oers specially designed, lateral fastening points, which allow the installaon of a
03
120/240 mm radiator. Please note that - depending on the manufacturer - under certain circum-
stances the uppermost 5.25 inch drive bay may no longer be used when mounng a 240 mm
radiator.
Front: 120/240 mm radiator
Behind the front panel, a 120 or 240 mm radiator can be mounted. Please note that the front
HDD cages have to be removed for this. The secondary HDD cage can remain in the case and be
displaced if necessary to install a parcularly thick radiator. This means, you can mount at least
three 3.5 inch drives at any me.
For an opmum cooling performance we recommend to select for the front radiator installa-
on. In this conguraon, the standard and adjustable Deep Silence fans can supply the radiator
directly with cooler air.
If you do not want to do without the front hard drive cages, you can of course mount the radiator
convenonal under the top panel.
For compact water cooling soluons, you should check before the installaon if the original
factory hoses between the cooler and radiator are suciently long enough in order to mount
the radiator-fan-combinaon at the front of the case.
Rubber hose guides:
Four rubber hose guides are located in the rear, so that the appropriate water cooling compo-
nents can be operated or mounted externally.
Air Chimney
One of the main features of the Nanoxia Deep Silence 1 Rev. B is without a doubt the Air Chimney
(design patented). The Air Chimney can easily be opened or closed using the slider on the side of
the top cover and fullls various funcons.
When closed, the uniform design line of the case is always maintained. If for example liquid
should be spilled on the cover, it would not directly pass through into the interior of the enclosure -
as oen encountered in the honeycomb design cases.
A further advantage of the Air Chimney is the ability to retrot the case with addional fans or a
radiator / compact water cooling soluon.
If you should decide to install addional case fans and / or a radiator under the top panel, we
recommend to keep the Air Chimney open, to ensure an opmum air circulaon.
On the next pages you can nd some useful ps and explanaons for the opmal use of your
new case and for the installaon of your hardware.
Please visit our website at www.nanoxia-world.com
04
EN
II. Installaon Instrucons
1. Installaon of the motherboard
You can mount XL-ATX, ATX, M-ATX and Mini-ITX motherboards in the Deep Silence 1 Rev. B. In
order to ensure an easy installaon of your motherboard, we suggest the following procedure:
Please consult the following charts to nd your motherboard form factor.
XL-ATX / ATX Motherboard Micro-ATX Motherboard Mini-ITX Motherboard
Aach the included EPS extension cable on to your motherboard – do not connect it to the
power supply yet.
Aach the included EPS extension cable on to your motherboard – do not connect it to the
power supply yet. Next you should mount the CPU cooler - for very large CPU coolers, the
aachment of the EPS extension cable aer installaon can be dicult.
In the next step place the motherboard gently inside the case and lead the EPS extension cable
through the opening provided in the top le of the mainboard tray.
Fix the motherboard to the motherboard
tray. Aer the installaon of the power
supply, you can connect the EPS extension
cable to the EPS-connector on the PSU at
the back of the motherboard-tray.
2. Installaon of external drives
You can install up to three external drives. Included is a frame adapter for mounng a 3.5 inch
drive.
05
2.1 Opcal drives
To install opcal drives, please remove both
side panels. The installaon of opcal drives
is tool-free.
Remove the 5.25 inch cover by pulling the
lateral lng lever cauously towards you
and take out the cover.
Then loosen the lock on both sides by
dragging the black slider backwards (1).
Then slide the drive into the desired posion.
Lock the holder by pushing the slider back
to its original posion (2).
2.2 Ulizing the external 3.5 inch bay
If you for example desire to place a 3.5 inch card reader, you can use the internal adapter for
this purpose. Please remove at rst the 5.25 inch cover, as described under chapter 2.1.
Open the two quick release of the boom 5.25 inch bay and remove the adapter frame. Install
the card reader in the frame and then put both the frame and the card reader back into the
bay. Lock the quick-release. At the end you can put the included 3.5 inch adapter plate carefully
before the card reader.
3. Installaon of hard drives
The Deep Silence 1 Rev. B allows you the decoupled mounng of 14 hard disk drives. A total
of 11 x 2.5/3.5 inch bays are available. Included is the newly developed 6 x 2.5 inch mounng
frame, which will take three 3.5 inch bays for installaon. By using the 5.25 inch to 3.5 adaptor,
you can mount a total of 15 hard disks drives in your case.
06
EN
To lock the drive, push the bracket with the
drive back installed back into the slot unl
the bracket is re-engaged.
Figure 3A Figure 3B
3.2 Ulizing the external 3.5 inch bay
Your case is equipped with an addional
3-fold HDD cage, which is mounted on the
secondary mounng bracket at the case
boom. This rail can be shied or removed
at any me if necessary. To do so, please
unscrew the four screws which are holding
the rail. You can then move rail and cage to
a dierent posion on the case boom.
3.1 Mounng of hard disk drives
Install the hard drives in the illustrated mounng frames. In order to extract the frame, squee-
ze the protruding brackets and pull the slide out gently.
To install a hard drive into a bracket insert the disk so that the connectors point to the back and
aach the hard drive using the screws provided.
For the installaon of 3.5 inch drives, use the holes in Figure 3A.
For the installaon of 2.5 inch drives, use the holes in Figure 3B.
07
3.3 Conversion and removal of the HDD-cages
Your new case is equipped with three modular HDD-cages (2 x 3-bay, 1 x 5-bay). The cages can
be removed, swapped or reposioned.
Due to this unique variability, you can:
- Adjust the number of available HDD mounts
- Install extra-long graphic cards
- Opmize the air ow within the case
- Mount a water cooling system behind the front
fans
To remove the upper HDD cage, rst remove the
le side panel as seen from the front as well as
the two thumb screws that secure the cage. Then
you can carefully pull it out.
If you want to remove the lower hard drive cage in order to install a water cooling radiator,
simply loosen the 8 screws holding the cage to the chassis.
First remove the front panel (see chapter 4.1).
Next loosen the four screws securing the HDD cage to the front panel.
Finally, remove the four screws at the boom of the case which allow the cage to be removed.
09
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Recinto de Nanoxia
Nanoxia
Nanoxia DEEP SILENCE 2 Manual de usuario
Nanoxia
Nanoxia CoolForce 2 Manual de usuario
Nanoxia
Nanoxia Deep Silence 3 Manual de usuario
Nanoxia
Nanoxia PROJECT S MINI Manual de usuario
Nanoxia
Nanoxia Deep Silence 5 Manual de usuario
Nanoxia
Nanoxia Deep Silence 6 Revision B Manual de usuario
Nanoxia
Nanoxia Deep Silence 5 Manual de usuario
Nanoxia
Nanoxia CoolForce 1 Manual de usuario
Nanoxia
Nanoxia Deep Silence 5 Rev. B Manual de usuario
