4 5
1. MYGO MINI QPCR INSTRUMENT
2. MYGO MINI USER GUIDE
3. POWER SUPPLY UNIT AND MAINS CABLE
4. ETHERNET CABLE
5. USB DRIVE
6. USB DRIVE EXTENSION CABLE
SETUP
INSTALLING YOUR MYGO MINI
You should have the following items in the MyGo Mini box:
Please keep the box the MyGo Mini came in, in case you need to
protect your MyGo Mini during storage or shipment in future.
Heatsink
Lid
Foot
Display LEDs
LID
The lid of the MyGo Mini
can be removed from the
instrument and must be
attached at all times when
not in use. To remove the
lid push down and turn
anticlockwise. To attach
the lid, first line up the lugs
on the lid with the grooves
on the mount plate as
shown below. Once aligned
press down, and then turn
clockwise to secure until you
feel a hard stop.
If the instrument is
connected to power the
instrument will say “Lid on”
and “Lid off” when you attach
and remove the heated lid.
The instrument will display
green when the lid is fitted,
and display pulsating yellow
when the lid is removed.
The lid may get warm during
operation; this is normal.
HEATSINK
This is the outer body of
the instrument and enables
efficient cooling of the
system during thermal
cycling. Ensure that there
is free airflow around the
instrument - do not cover
or wrap the instrument,
and keep it at least 5 cm
away from objects or walls.
FOOT
The foot should always be
placed facing down on your
worktop during operation.
Grooves
Lugs
