MY WATER FILTER INSTALLATION INSTRUCTION
4. Then check there is a rubber washer inside the diverter and tighten the
diverter onto the double male thread adapter until tight & sealed. A
good seal also allows the water filter to be more responsive to the tap,
stopping & starting the water flow. You may require a tool to tighten
properly to be totally sealed with no leaks.
The diverter must be tightened tight to pull the diverter together to
make it seal. You may use plumbers thread tape if required to help
make a good seal on the threads as we do not want any water leaking
from this point, but only use thread tape if required as thread tape can
sometimes stop the diverter been tightened fully, the diverter must be
tight to pull it together to seal it well.
3. The diverter valve that comes with the system has a 21-millimeter
female thread connection. If your faucet has a 21-millimeter male
thread, ensure there is a rubber washer inside the diverter and simply
connectbyscrewingthedivertervalvestraightontoyourfaucetthread.
However, if your faucet spout has a female thread connection, use
the double male to male adaptor included with the system, simply
connect the double male to male adaptor onto the tap spout thread
first, ensuring there is a rubber washer to fit up into the tap spout
thread to seal.
