MXN MXN9500DD Manual de usuario
7” DIGITAL 2-DIN TFT LCD
ALL ROUND VISION MONITOR
Model: MXN9500DD
Design and specications are subject to change without notice.
OWNER’S MANUAL
PLEASE READ CAREFULLY BEFORE
USING THIS PRODUCT.
PACKAGE CONTENTS 03
OPERATION 04
SYSTEM SETTINGS 05
FUNCTION 05
PICTURE MENU 06
NORMAL/MIRROR 06
AUDIO 07
TRIGGER AUDIO 07
CAMERATRIGGER 08
DISTANCE MARKER 08
MARKER 08
AUTO PICTURE SCAN 09
CAMERA NAME 09
SPEED SWITCH 10
MENU 11
SPLIT 11
TRIPLE 11
QUAD 12
MANUAL SELECTION 12
DISTANCE MARKER ADJUSTMENT 13
MENU LOCK ON/OFF FUNCTION 14
AUTO PICTURE SCAN ON/OFF FUNCTION 14
CONNECTIONS 15
CAMERA INPUT 15
INSTALLATION 16
IN-DASH INSTALLATION 16
REMOVAL OF INSTALLED MONITOR 16
ON-DASH INSTALLATION WITH BRACKET 17
INSTALLATION OF HEAVY DUTY MOUNTING BRACKETS 18
SPECIFICATIONS 19
·I·N·D·E·X·
MXN9500DD Owner’s Manual 3
PACKAGE CONTENTS
SUNVISOR MONITOR BRACKET
REMOVER
MANUAL
BRACKET SCREWS
CABLE CLIP
ITEM Q’TY
MONITOR 1
SUNVISOR 1
REMOVER 2
BRACKET 1
BRACKET SCREW 3
CABLE CLIP 2
MULTI-CABLE 1
MANUAL 1
MULTI-CABLE
7” DIGITAL 2-DIN TFT LCD ALL ROUND VISION MONITOR
4
OPERATION
RIGHT
SPEAKER
POWER
SELECT
DOWN
MENU
DAY/NIGHT SENSOR (CDS)
LEFT
UP
Press [RIGHT] button to adjust monitor volume.
Use [RIGHT] button to change OSD setting during
system setting.
Press [POWER] button to turn on/off the monitor.
Press [SELECT] button to select the respective camera channel.
(CAM1-CAM2-CAM3-CAM4-AUX-SPLIT-TRIPLE-QUAD-CAM1..)
Press [DOWN] button to navigate the menu for system setting.
Press [MENU] button for system setting.
Automatic brightness control sensor.
Press [LEFT] button to adjust monitor volume.
Use [LEFT] button to change OSD setting during
system setting.
Press [UP] button to navigate the menu for system setting.
MXN9500DD Owner’s Manual 5
SYSTEM SETTINGS
DIMMER (Automatic Brightness Control)
Select AUTO or OFF to have Automatic or Manual brightness of the monitor.
REMARK: By activating DIMMER AUTO function, the monitor adjusts the brightness and button
illumination according to the environment’s light conditionst.
NIGHT BRIGHT
Select the DIMMER to
『AUTO』
, set the value of backlight on NIGHT mode.
LANGUAGE
Total 6 OSD languages can be selected: [ENGLISH, SWEDISH, DANISH, NORWEGIAN, DUTCH,
FINNISH].
Select the preferred LANGUAGE.
AUTO POWER
Select monitor activation function as below.
[AUTO] Monitor keeps the last setting in memory, after vehicles ignition OFF and ON.
[ON] Monitor starts up『Power-ON』mode automatically.
[OFF] Monitor starts up『Stand-By』mode automatically.
RESET
Press >> button to go the factory default settings.
SYSTEM INFO.
Refers to system information of the monitor.
FUNCTION
FUNCTION
LANGUAGE ENGLISH
SYSTEM NTSC/PAL
DIMMER AUTO/OFF
NIGHT BRIGHT 50
AUTO POWER AUTO/ON/OFF
RESET >
SYSTEM INFO VER 1.30
7” DIGITAL 2-DIN TFT LCD ALL ROUND VISION MONITOR
6
SYSTEM SETTINGS
Press [LEFT/RIGHT] button to adjust the PICTURE of the monitor.
User can adjust picture setting values for CAMERA CHANNELS and AUX CHANNEL individually.
Via PICTURE MENU, the picture of CAM1, CAM2, CAM3, CAM4, SPLIT, TRIPLE, QUAD MODE
can be adjusted.
Via AUX PICTURE MENU, the picture of aux channel can be adjusted.
PICTURE MENU
PICTURE
CONTRAST 50
BRIGHTNESS 50
COLOR 50
TINT 50
AUX PICTURE
CONTRAST 50
BRIGHTNESS 50
COLOR 50
TINT 50
NORMAL/MIRROR
Each camera picture (CAM1/CAM2/CAM3/CAM4) can be switched individually as NORMAL/MIRROR
image.
UP/UPSIDE DOWN
Camera pictures can be rotated 180 degree as UP/DOWN image.
NORMAL/MIRROR
NORMAL/MIRROR
CAM1 NORMAL/MIRROR
CAM2 NORMAL/MIRROR
CAM3 NORMAL/MIRROR
CAM4 NORMAL/MIRROR
UP/UPSIDE DOWN UP/UPSIDE DOWN
MXN9500DD Owner’s Manual 7
SYSTEM SETTINGS
During manual channel select the audio per channel can be selected ON or OFF individually.
When the mode is [ON], audio will be on (activated) during manual camera selection.
When the mode is [OFF], audio will be off (mute) during manual camera selection.
AUDIO
AUDIO
CAM 1 AUDIO ON/OFF
CAM 2 AUDIO ON/OFF
CAM 3 AUDIO ON/OFF
CAM 4 AUDIO ON/OFF
AUX AUDIO ON/OFF
SPLIT ON/OFF
TRIPLE ON/OFF
QUAD ON/OFF
Audio ON or OFF during Trigger mode.
Choose the trigger and then push [ENTER] via
SELECT button. The Audio setting menu will be
shown as the drawing next to this text.
Choose the required volume level per trigger.
TRIGGER AUDIO
TRIGGER AUDIO
TRIG 1 AUDIO ENTER
TRIG 2 AUDIO ENTER
TRIG 3 AUDIO ENTER
TRIG 4 AUDIO ENTER
SP SW AUDIO ENTER
When the mode is [ON], audio will be on
(activated) during Trigger mode.
When the mode is [OFF], audio will be off
(mute) during Trigger mode (user can not
adjust the volume manually during Trigger
activation).
TRIG1 AUDIO
AUDIO ON/OFF
VOLUME 50
7” DIGITAL 2-DIN TFT LCD ALL ROUND VISION MONITOR
8
TRIGGER 1/2/3/4 (Trigger source selection)
Select the required trigger source: CAM1/CAM2/CAM3/CAM4/AUX/SPLIT/TRIPLE/QUAD
REMARK
TRIGGER PRIORITY: TRIGGER 1 > TRIGGER 2 > TRIGGER 3 > TRIGGER 4
In case DC power at all triggers at the same time, then Trigger 1 has highest priority.
TRIG. DELAY
When a TRIGGER wire is connected to a pulse DC power signal (e.g.direction indicator lights)
then the [TRIGGER DELAY] function avoids the monitor ashing ON-OFF, ON-OFF, etc..
Select ON to have DISTANCE MARKER for CAM1, CAM2, CAM3, CAM4 during Trigger Mode.
The DISTANCE MARKER is displayed only when the trigger is activated.
CAMERA TRIGGER
DISTANCE MARKER
MARKER
SYSTEM SETTINGS
CAMERA TRIGGER
TRIGGER 1 CAM1-QUAD
TRIGGER 2 CAM1-QUAD
TRIGGER 3 CAM1-QUAD
TRIGGER 4 CAM1-QUAD
TRIG 1. DELAY 2 (0-9)
TRIG 2. DELAY 2 (0-9)
TRIG 3. DELAY 2 (0-9)
TRIG 4. DELAY 2 (0-9)
DISTANCE MARKER
TRIGGER 1 ON
TRIGGER 2 OFF
TRIGGER 3 OFF
TRIGGER 4 OFF
MARKER /
Select DISTANCE MARKER. or
MXN9500DD Owner’s Manual 9
The scanning time of CAM1/CAM2/CAM3 /CAM4/AUX/SPLIT/TRIPLE/QUAD can be selected
individually.
REMARK
If the SCAN TIME is set as [0], monitor skips its channel during the scanning.
Press [UP] button for 4 seconds to ACTIVATE/INACTIVATE auto scanning function.
CAMERA NAME can be selected as CAM1, 2, 3, 4/ REAR/ LEFT/ RIGHT/ FRONT.
AUTO PICTURE SCAN
CAMERA NAME
SYSTEM SETTINGS
AUTO PICTURE SCAN
AUTO SCAN ON/OFF
CAM1 SCAN TIME 2 (0-9)
CAM2 SCAN TIME 2 (0-9)
CAM3 SCAN TIME 2 (0-9)
CAM4 SCAN TIME 2 (0-9)
AUX SCAN TIME 2 (0-9)
SPLIT SCAN TIME 2 (0-9)
TRIPLE SCAN TIME 2 (0-9)
QUAD SCAN TIME 2 (0-9)
CAMERA NAME
CAM1 NAME
CAM1/REAR/LEFT/RIGHT/FRONT
CAM2 NAME
CAM2/REAR/LEFT/RIGHT/FRONT
CAM3 NAME
CAM3/REAR/LEFT/RIGHT/FRONT
CAM4 NAME
CAM4/REAR/LEFT/RIGHT/FRONT
7” DIGITAL 2-DIN TFT LCD ALL ROUND VISION MONITOR
10
The orange wire needs to be connected with the vehicle’s analogue tacho signal and via MENU
the SPEED SWITCH needs to be selected ON. At FREQUENCY 67Hz setting (most common
used tacho signal) the selected camera will be displayed during a speed of 0-33km/h. Select
the concerning camera via『UNDER FREQUENCY CH:』(at different type tacho signals the
FREQUENCY needs to be adjusted into higher or lower value than this example)
Over 33km/h (72Hz) the selected camera will be switched OFF automatically. When the vehicle’s
speed slows down, then the selected camera will be switched ON automatically again at 30km/
h. Instead of automatic switch OFF at a speed over 33km/h it is also possible to activate another
video source, such as a navigation picture from an optional navigation computer. In this case
user needs to select『OVER FREQUENCY DISPLAY: ON』and user needs to select『OVER
FREQUENCY CH:』
In case of TRIGGER activation during『SPEED SWITCH ON』 mode, then TRIGGERS 1~4 will
overrule the『SPEED SWITCH』 function.
SPEED SWITCH
SYSTEM SETTINGS
SPEED SW
SPEED SWITCH ON/OFF
FREQUENCY 67 Hz
UNDER FREQUENCY CAM CAM3/ CAM1~QUAD
OVER FREQUENCY DISPLAY ON/OFF
OVER FREQUENCY CAM CAM1/ CAM2~QUAD
Tabla de contenidos
Otros manuales de Monitor de MXN
MXN
MXN MXN1500SQ Manual de usuario
MXN
MXN MXN-HD7DM Manual de usuario
MXN
MXN MXN10-TVI Manual de usuario
MXN
MXN MXN-7DMQ Manual de usuario
MXN
MXN MXN-P7D Manual de usuario
MXN
MXN MXN71A Manual de usuario
MXN
MXN MXN-P7DQ Manual de usuario
MXN
MXN MXN-7DM Manual de usuario
MXN
MXN HD7DM Manual de usuario
MXN
MXN MXN-HD7DM Manual de usuario
