MWf VIGOR Manual de usuario
VIGOR
VIGOR User Manual
The latest gold, metal and cave detector
Metal and Water Finder
WWW.MWF-USA.COM
User Manual
Index
For user
ماﺪﺨﺘﺳﻻا ﻞﻴﻟد ةءاﺮﻗ
. ﺚﺤﺒﻟا أﺪﺑ ﻞﺒﻗ ﺪﻴﺟ
Index
Technical specications
Important Nots
Main Unit
Device Parts
Main Unit Setup
page 1
page 2
page 3
page 5
page 6
page 7
Long Range Locator System page 11
Charging page 20
Notes page 22
Metal and Water Finder
page|1
The user must practice before starting the detecting operations
and discoveries
Store in Cool and dry place 15-40 C 5%-75% humidity Read & Understand
The User's manual
before using this device
Safety information
2
The operating in high voltage
areas would limit the results and
performance
Don't operate two devices with
same method of search at the
same place
The operator Must remove any
metals that might affect the
opreatin eg:Rings,watch, belt....
Any attempt to tamper the
device or unapproved
maintenance would void the
warranty
Don't store in high temperature or
high humidity
It’s better to turn off mobile
while using the device.
Disconnect the batteries
before long time storage
For best power endurance and
reliability. use heavy duty and high
quality batteries thats for the devices
which work on removable batteries
Important Nots
VIGOR
page|2
Technical specications
VIGOR
Search for Search for minerals, precious metals and cavities in the ground.
Operating processor: MICROCONTLLER PIC18 & ARM 7
Processing procedures LRL treatment for energy levels formed around the target's
ground area
20 m
Destance of search program: 2000 m
Automatic and intelligent
guidance system:
Yes, through the graphical interface indicating the locations
and direction of the target
Search System
Long Range Locator System, the system detects the energy levels
around the target (LRL System)
Voice alerts: Yes
Depth of search program:
Vibration alerts: Yes
Power : Two Li-IoN Cells 3.7v/2000 mAh
Battery working hours 6working hours
Charger 9volt 2Ah / 3hours for full charging
Display Type: TFT Color Monitor 65536 , “ 5Color, 48Mhz , CDMA GPU
page|3
Technical specications
page|4
: ﺔﺑﻮﻃﺮﻟا
:نزﻮﻟا
:دﺎﻌﺑا
VIGOR
Operating temperature: From °15 C to °60 C
Storing temperature: From °15 C to °40 C
Humidity: It can be stored and operated in the average air humidity level
of %5 to %80.
Device weight 1.25 KG with the case
Device dimensions 22 x 11 x 4.5 cm
case dimensions 22 x 11 x 4.5 cm
page|5
Attached unit
Move Button
ON/OFF Button
16
2
3
Enter Button
Back Button
Transceiver Antenna
7Signal Support Antenna
8Carrying handle
9Charge socket
10 Battery case
4
Display Screen
5
Main Unit
8
2
5
4
1
3
6
9
10
VIGOR
7
Device Parts
VIGOR
page|6
Two radio antennas to send and receive the waves comes from the
target due to the high sensitivity transmitted waves
Transceiver and signal support antennas
Afree-moving handle allows the device to rotate and axial movement,
with the advantage of direct jaw installation, easy and practical
Carrying Handle
Charger
It is the unit responsible for leading the search and controlling the
attached units and processing the data extracted from the ground
and displaying it on the screen using the most advanced interactive
programs and systems
Main Unit
An electric charger to recharge the device's battery
Values: Input: 240-100VAC / 60-50Hz / 0.4 amps
Output: 10 volts AC / 2Amp / 15 Watt.
Device Set up
page|7
Turn on the device by pressing longly the Power button
When selecting the language by switching between it by press on move button, the desired
language is selected by pressing the Confirm button, then the device will back to the main
interface
The boot screen will appear after that, the language selection interface,when the first start
of the device
Set up and work on the device
VIGOR
When selecting the settings icon and pressing the enter button, asettings interface appears
wich allow us to reset the device, the settings interface contains options for adjusting both
brightness ,sound and language
page|8
The main interface contains two search icons "Search" to enter the search system and start
searching and "settings" to adjust the device’s settings, and it has an indicator indicating the
battery level present in all interfaces.The movement between the icons is done by pressing the
Move button, to confirm one of the two options, we have to press the Confirm button Enter
When selecting the setting icon
When selecting the search icon
Device Set upVIGOR
page|9
Adjusting the volume: When selecting the volume icon, the volume is changed by pressing the
Enter button to change the volume according to five volume levels in addition to the silent mode,
and we can also activate and deactivate the vibiration by long pressing on the Enter button
Device Set up
VIGOR
Brightness Adjustment: When selecting on the brightness icon, the screen brightness value is
changed by pressing the Enter button to change the brightness value according to ten levels of
brightness from
10%to 100%
Tabla de contenidos
Otros manuales de Detector de metales de MWf
MWf
MWf MF-60 Manual de usuario
MWf
MWf TF-MINI Manual de usuario
MWf
MWf GOLD LINE Manual de usuario
MWf
MWf GF-650 Manual de usuario
MWf
MWf MF-90 Manual de usuario
MWf
MWf GF 1000 Manual de usuario
MWf
MWf MF-1100 A Manual de usuario
MWf
MWf Gold Radar Manual de usuario
MWf
MWf Inspector 900-Plus Manual de usuario
Manuales populares de Detector de metales de otras marcas
Steinberg Systems
Steinberg Systems SBS-MD-12 Manual de usuario
GOLDEN MASK
GOLDEN MASK 5 Manual de usuario
Grizzly
Grizzly YM 203 Manual de usuario
Fisher Research Labs
Fisher Research Labs 1280-X Aquanaut Manual de usuario
Treasure Cove
Treasure Cove Vibra-Probe 560 Manual de usuario
Accurate Locators
Accurate Locators XL16 IMAGER Manual de usuario