MuxLab 500552 Manual de usuario
Dante 2-Channel Analog Audio Decoder
User Manual
500552
© MuxLab Inc. 2023 1 94-001005-A/SE-001005-A
Dante 2-Channel Analog Audio Decoder
Table of Contents
1. Safety Precautions....................................................................................................................................................3
2. Introduction................................................................................................................................................................4
3. Features.......................................................................................................................................................................4
4. Package Contents...................................................................................................................................................4
5. Specifications............................................................................................................................................................5
6. Operation Controls and Functions....................................................................................................................6
8. Application Diagram...............................................................................................................................................7
© MuxLab Inc. 2023 2 94-001005-A/SE-001005-A
Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury.
Do not dismantle the housing or modify the module. It may result in electrical shock or
burns.
Do not open or remove the housing of the device as you may be exposed to dangerous
voltage or other hazards.
To prevent fire or shock hazard, do not expose the unit to rain, moisture and do not install
this product near water. Keep the product away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an
object or liquid falls or spills on the housing, unplug the module immediately.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
Using supplies or parts not meeting the product specifications may cause damage,
deterioration or malfunction.
Refer all servicing to qualified service personnel.
Install the device in a place with adequate ventilation to avoid damage caused by
overheat.
Unplug the power when left unused for a long period of time.
Information on disposal of devices: do not burn or mix with general household waste,
please treat them as normal electrical waste.
1. Safety Precautions
To ensure the best performance from the product, please read all instructions carefully before
using the device. Save this manual for future reference.
Copyright Notice
All contents in this manual are copyrighted, and cannot be cloned, copied, or translated
without the express permission of MuxLab Inc. Product specifications and information in this
document are for reference only, and the content may be updated from time to time without
prior notice.
© MuxLab Inc. 2023 3 94-001005-A/SE-001005-A
Dante 2-Channel Analog Audio Decoder
Interface Dante audio equipment to analog audio equipment
Supports balanced/unbalanced 2ch analogue audio output
Audio sampling rate supports 44.1kHz, 48kHz and 96kHz (24bit)
Audio output supports 3-level gain adjustment
：
+18dBu, 0dBu (default) and -10dBV
Supports 12VDC power supply and PoE function (IEEE802.3af Class 0)
Supports AES67 RTP audio transport
3. Features
2. Introduction
The Dante 2-Channel Analog Audio Decoder (Model: 500552) is designed to receive digital
audio signals from Dante-compliant equipment, then decode and output them as analog
audio signals. The unit supports balanced or unbalanced audio output and 3 level gain
adjustment. It can be powered using either PoE from any PoE network switch or via local with
a 12VDC power supply.
One (1) Dante 2-Channel Analog Audio Decoder
One (1) 6pin-3.81mm Phoenix Connector (male)
One (1) 2pin-3.81mm Phoenix Connector (male)
One (1) User manual (available via download)
4. Package Contents
Notes
：
Confirm that the product and accessories are all included. If not, please contact the
supplier from which you purchased the unit.
© MuxLab Inc. 2023 4 94-001005-A/SE-001005-A
Dante 2-Channel Analog Audio Decoder
5. Specifications
© MuxLab Inc. 2023 5 94-001005-A/SE-001005-A
Dante 2-Channel Analog Audio Decoder
Video Network Bandwidth
Transmission Distance
Control Method
Output
Dimensions (WxDxH)
Weight
Inputs
Power Supply
Power Consumption
Color
Dante Controller
Housing
Storage temperature
Relative Humidity 20 - 90% RH (no condensation)
Audio Formats
Operation Temperature
Warranty
Order Information
100M
PCM 2.0 44.1kHz/48kHz/96kHz up to 24bit
100m (CAT6/6A)
1 x DANTE [RJ45 connector, PoE]
Technical
186g
1x AUD [6-pin phoenix, 3.81mm]
DC input: 12V PoE input: IEEE802.3af Class 0
1.32W
Black
32 - 104°F / 0 - 40°C
Metal Enclosure
-4 - 140°F / -20 - 60°C
Connection
1 x PWR [2-pin phoenix, 3.81mm]
Mechanical
120mm[W] x 47mm[D] x 26mm[H]
2 years
500552 Dante 2 Channel Analog Audio Decoder (UPC: 627699005521)
2
6. Operation Controls and Functions
1
No Name Function Description
DC 12V power input port.DC IN
© MuxLab Inc. 2023 6 94-001005-A/SE-001005-A
2 channel analog audio output ports, supporting balanced and unbalanced
audio.
Audio Output (CH1/CH2)
Dante digital audio output port. Connect to the Network Switch through RJ45
line, supporting PD power supply.
The green LINK LED is flashing when there is data transmission.
The yellow DATA LED is always on after normal connection
Used for audio output gain adjustment, respectively +18dBu, 0dBu (default),
-10dBV.
Dante PoE
3
Gain Switch
4
Dante 2-Channel Analog Audio Decoder
Dante 2-Channel Analog Audio Decoder
500552
Follow us:
2321 Cohen | St-Laurent , H4R 2N7 | Québec, Canada Tel: 514-905-0588 | Fax:
514-905-0589 | Toll free: 1-877-689-5228 [email protected] |
[email protected] | www.muxlab.com
7. Application Diagram
Dante 2-Channel Analog Audio Decoder
Tabla de contenidos
Otros manuales de Convertidor de medios de MuxLab
MuxLab
MuxLab 500717 Manual de usuario
MuxLab
MuxLab 500550 Manual de usuario
MuxLab
MuxLab 500438-V2 Manual de usuario
MuxLab
MuxLab UHD-4K Manual de usuario
MuxLab
MuxLab 500001 Manual de usuario
MuxLab
MuxLab 500021 Manual de servicio
MuxLab
MuxLab 500054 Manual de usuario
MuxLab
MuxLab 500425 Manual de usuario
MuxLab
MuxLab 3G-SDI ST2110 Manual de usuario
MuxLab
MuxLab 500436 Manual de usuario
MuxLab
MuxLab 500088 Manual de usuario
MuxLab
MuxLab 500081 Manual de usuario
MuxLab
MuxLab 500554-WH Manual de usuario
MuxLab
MuxLab 500728 Manual de usuario
MuxLab
MuxLab 500438 Manual de usuario
MuxLab
MuxLab 500551 Manual de usuario
MuxLab
MuxLab 500774 Manual de usuario
MuxLab
MuxLab 500717 Manual de usuario
MuxLab
MuxLab 500087 Manual de usuario
MuxLab
MuxLab 500767 Series Manual de usuario
