LP1800 series lithium iron phosphate battery is a new energy storage
product developed and produced by MUST, which can provide reliable
power support for various equipment and systems.
The LP1800 series has a built-in BMS battery management system, which
can manage and monitor battery voltage, current, temperature and other
information.
2.1 Product Features
1) Built-in soft start function, when the inverter needs to start from the
battery, it can reduce the current impact.
2) Double active protection at BMS level.
3) Automatically set the address when multiple groups are connected.
4) Support wake-up via 5~12V signal of RJ45 port.
5) Support the host controller to upgrade the battery module through CAN
or RS485 communication.
6) Enable 95% depth of discharge, which can be used for inverters
operating in full compliance with its protocol.
7) The module is non-toxic, non-polluting and environmentally friendly.
8) The cathode material is lithium iron phosphate, which has good safety
performance and long cycle life.
9) The battery management system (BMS) has protection functions such as
over-discharge, over-charge, over-current, high and low temperature, etc.
10) The system can automatically manage the charging and discharging
status and balance the voltage of each cell.
11) Flexible configuration, multiple battery modules can be connected in
parallel to expand capacity and power.
12) Adopt self-cooling method to quickly reduce the overall noise of the
system.
13) The module has less self-discharge, and can be put on the shelf for up
to 6 months without charging. There is no memory effect, and the
shallow charge and discharge performance is excellent.
14) Small size, light weight, easy installation and maintenance.
3
