Muratec F-360 Manual de usuario
For
F-360
Quick Reference
Fax
Sending a fax.....................page
2
Broadcast........................page
3
Cancel sending a fax...............page
4
Copy
Making a copy ....................page
5
Using the bypass tray ..............page
6
Just in case
Clearing original document jams .....page
8
Clearing printout jams.............page
10
Function table
...........page
12
2
Enter the fax number using the numeric keypad
or
Press the one-touch key*1
or
Press
SPEED DIAL/GROUP
once and enter
the speed-dial number using the numeric keypad
or
Press
SPEED DIAL/GROUP
twice and enter
the group number using the numeric keypad
*1
: When you press a one-touch key, you do not need
to press
START
.
Set the document in the
ADF face up and adjust
the document guides.
Adjust the followings, if necessary:
• Select the resolution by pressing
[Mode]
.
• Select the contrast by pressing
[Contrast]
.
Enter the fax number.
Sending a fax
The number of the pages you
can set in the ADF at one time
is as follows:
Letter-sized: 80 sheets
Half letter-sized: 80 sheets
Legal-sized: 50 sheets
3
Press
START
.
Fax
21
1
Set the document in the
ADF face up.
Adjust the resolution and the
contrast, if necessary.
Broadcast
Enter the fax number using the numeric keypad
or
Press the one-touch key*1
or
Press
SPEED DIAL/GROUP
once and enter
the speed-dial number using the numeric keypad
or
Press
SPEED DIAL/GROUP
twice and enter
the group number using the numeric keypad
*1
: When you press a one-touch key, you do not need
to press
START
.
4
Press
START
.
Enter the fax number.
To add more fax numbers,
repeat steps 2 and 3.
3
2
Press
BROADCAST
.
If you want to review the numbers
you entered, press
[Review]
.
When you are finished, press
[Return]
to return to the previous display.
3
Press
STOP
.
Press
[Location]
to see the individual numbers within
the broadcast.
Press or until you find the number you want to cancel.
Cancel sending a fax
4
When the command you want to cancel shown,
press
[Erase]
.
Press or to scroll through
currently stored commands.
Press
COMM.CANCEL/CONFIRM.
1
Press
[Yes]
.
If you want to cancel another command,
repeat steps 2–4.
45
3
2
Press
START
.
Set the document in the
ADF face up.
Adjust the followings,
if necessary.
• Select the resolution by
pressing
[Mode]
.
• Select the contrast by pressing
[Contrast]
.
Enter the number of copies
using the numeric keypad.
Making a copy
Press
COPY
to change
to Copy mode.
1
4
5
2
Copy
3
5
If you want to reduce the document, set the reduction rate in advance:
1. Press
MENU
, 2, 3, 0, 1,
ENTER
.
2. Select "Copy Reduction Rate", then press
ENTER
.
3. Select Auto, 100% or 78%(Legal -> Letter), then press
ENTER
.
4. Select "Exit", then press
ENTER.
Helpful Tip
6
1
Press
COPY
to change
to Copy mode.
Using the bypass tray
Hopper
Flapper release lever
3
Open the bypass tray on the right
side of your machine.
Pull out the hopper of the bypass tray
and raise the flapper release lever.
2
Set the document in the ADF face up.
4
Place the paper on the bypass tray
face down. Insert up to 50 sheets.
Adjust the paper guide to fit the
paper. Then lower the flapper
release lever.
7
When you use transparency film,
select "OHP".
The LCD will show:
Using the cursor key, select
the paper size you’ve set on
the bypass tray.
Press
ENTER
.
Enter the number of
copies.
Press
START
.
7
Bypass Tray
Letter OHP
Legal
H.LTR
Adjust the following, if necessary.
• Select the resolution by pressing
[Mode]
.
• Select the contrast by pressing
[Contrast]
.
5
6
8 9
8
Just in case Clearing original document jams
In this step, if more than 60 seconds passes without
pressing any keys, the machine will erase from memory
all pages stored during this operation and the machine
will return to the standby mode.
In this step, if more than 60 seconds passes without
pressing any keys, the machine will begin to send or
copy the document(s) stored during this operation.
The check message "Repeat transmission."
will be printed out if the document jammed
during transmission.
Reset the document from
the jammed page and
press
START
.
3
If the document jammed in the following cases,
perform the job again from the beginning
after removed the jammed paper.
• The first page of the document jammed.
• During the quick memory transmission.
2
If you see this message on the LCD
and wish to resume scanning from
the jammed page, press
[Yes]
.
To abort the operation, press
[No]
.
Continue Storing?
[ Yes ][ No ]
Document Jam
1
Open the scanner cover and remove
the jammed paper (see next page).
Open & Check
the Blinking Cover
Document Jam
9
To remove the document...
Gently close the scanner cover.
3
Make sure both sides are
snapped down securely.
If the document has become wrinkled
or torn, do not re-send it.
1
Open the scanner cover.
Remove the original document.
If you cannot remove it, go to step 2.
Otherwise, skip to step 3.
2
Open the inner cover.
Remove the original document.
10
Clearing printout jams
1
Be careful not to put your hand between
the top cover and the machine.
Important !
Open the top cover.
2
Pull up the printer cover release
and open the printer cover.
Shield the drum cartridge from light,
especially strong light.
Important !
3
Remove the toner and
drum cartridge.
Otros manuales para F-360
3
Tabla de contenidos
Otros manuales de Máquina de fax de Muratec
Muratec
Muratec M-720 Manual de usuario
Muratec
Muratec M-1220 Manual de usuario
Muratec
Muratec M-910 Manual de usuario
Muratec
Muratec M-820 Manual de usuario
Muratec
Muratec F-114 Series Manual de usuario
Muratec
Muratec F-315 Manual de usuario
Muratec
Muratec M-2500 Manual de usuario
Muratec
Muratec F-320 Manual de usuario
Muratec
Muratec F-100 Manual de usuario
Muratec
Muratec F-300 Manual del operador
Muratec
Muratec F-65 Manual de usuario
Muratec
Muratec F-320 Manual de usuario
Muratec
Muratec F-76 Manual de usuario
Muratec
Muratec F-98 Manual de usuario
Muratec
Muratec F-160 Manual de usuario
Muratec
Muratec F-160 Manual de usuario
Muratec
Muratec F-560 Manual de usuario
Muratec
Muratec MFX-1330 Manual de instalación y operación
Muratec
Muratec F-520 Manual de usuario
Muratec
Muratec Office Bridge IF-200 Manual de usuario
