Murata 1LD Manual de usuario
Type1LD Evaluation Board Quick Start Guide
Page 1
Document Number: N1-4629
Version: 2.0
Release Date: 2021/2/26
Murata Manufacturing Co., Ltd.
Type1LD Evaluation Board
Quick Start Guide
Document No. N1-4629
Type1LD Evaluation Board Quick Start Guide
Page 2
Revision History
Revision Number
Release Date
Comments
Revision 1.0
2018/4/16
Initial
Revision 2.0
2021/2/26
Update for .patch platform file
Type1LD Evaluation Board Quick Start Guide
Page 3
Contents
1. About this Document.................................................................................................................4
1.1. Purpose and Scope..................................................................................................................4
1.2. Document Conventions............................................................................................................4
2. Evaluation Board .......................................................................................................................4
3. Setting up the WICED Studio and Building a Demo Application .....................................................5
4. Running scan Application ...........................................................................................................9
5. Notes when using external 32k XTAL.........................................................................................10
5.1. Change the application source................................................................................................10
5.2. Re-build the application and confirm the application running ...................................................10
Type1LD Evaluation Board Quick Start Guide
Page 4
a
1. About this Document
1.1. Purpose and Scope
This document provides instructions to set up Murata Type1LD EVB. Although Type1LD is supported by
WICED-SDK, some modifications will be required to use our EVB. We provide the modification as
“platform file”.
1.2. Document Conventions
Platform file – the source code to configure for each platfoms.
2. Evaluation Board
Verify pin setting for correct operation as below. Use the USB Connector marked in below.
External Flash
External
32k xtal
Reset Switch
USB Connector
Type1LD Evaluation Board Quick Start Guide
Page 5
3. Setting up the WICED Studio and Building a Demo Application
The WICED SDK is available for download from the Cypress WICED website.
To use the SDK, the following steps must be performed:
A) Download WICED-SDK from the WICED website.
https://www.cypress.com/products/wiced-software
B) Install the WICED-SDK.
Note: WICED directory is at “C:\Users\<user name>\Documents\WICED-Studio-<VERSION>” with
default installation.
C) Connect the Evaluation board to your PC via the mini USB cable.
Type1LD should be detected as “WICED USB Serial Port (COMXX)”. (“XX” is the serial port number.) If
Type1LD cannot be detected, you may manually install the driver from
<WICED-Studio>\Drivers\Windows\
D) Start the WICED-SDK
Start the WICED Studio by selecting START > Cypress > WICED-Studio.
Select target “43xxx_Wif-Fi” or “WICED Filters off”.
Project
Explorer
Code Editor
Console Window
Make Target Window
Type1LD Evaluation Board Quick Start Guide
Page 6
E) Apply the patch file provided by Murata.
a) Right click on 43xxx_Wi-Fi in Project Explorer, then select Team – Apply Patch…
b) Click Browse button and select the patch file, then click Finish button.
Type1LD Evaluation Board Quick Start Guide
Page 7
F) Build and download the application.
a) Click “New Make Target”. (If you cannot click this button, click “clean” in below list)
“Create Make Target” window will appear.
b) Input the following text to the “Target name” field.
snip.scan-MurataType1LD download download_apps run
c) Select “OK” and confirm that the new target have been added in the “Make Target” area.
Type1LD Evaluation Board Quick Start Guide
Page 8
G) Double-click on the Make Target “snip.scan-MurataType1LD download download_apps run” to build
the application.
Note: It will take some minutes for first building.
H) Building progress will be displayed on the window of the “Studio Console”.
I) “Build complete” indicates that the building and downloading of the application has been successful.
Type1LD Evaluation Board Quick Start Guide
Page 9
4. Running scan Application
To verify the application which is downloaded in section 3, you need to launch a terminal software such
as Tera Term. Please select [Setup] > [Serial Port…] in the menu bar to setup serial port. Please use the
following settings for the COM port connection.
The following texts will appear on Tera Term
Type1LD Evaluation Board Quick Start Guide
Page 10
5. Notes when using external 32k XTAL
If the BT application is not running with external 32k xtal, 32k xtal’s initialization process may need to be
added on BT application.
5.1. Change the application source
A) Open the application source
Example: 43xxx_Wi-Fi\apps\test\bt_mfg_test\bt_mfg_test.c
B) Confirm whether “wiced_init()” is called
If “wiced_init()” is called in “application_start()” , no need to add anything.
If “wiced_init()” is not called, do [ C). Add the function call ] as below.
C) Add the function call
Add below two lines at “application_start()” function.
“#include "platform/wwd_platform_interface.h" and “host_platform_init_wlan_powersave_clock();”
#include "platform/wwd_platform_interface.h"
////
void application_start( )
{
/* Initialise WICED */
wiced_core_init( );
host_platform_init_wlan_powersave_clock();
/* Enter BT manufacturing test mode */
bt_mfgtest_start( &stdio_config );
}
5.2. Re-build the application and confirm the application running
(END)
Tabla de contenidos
Otros manuales de Placa madre de Murata
Murata
Murata Cat-M1/NB-IoT Manual de usuario
Murata
Murata MEMS Manual de usuario
Murata
Murata N1-2657 Manual de usuario
Murata
Murata Type2EG BLE Manual de usuario
Murata
Murata MEX-1031 Manual de usuario
Murata
Murata 1GC Manual de usuario
Murata
Murata PKGX-16-4021 Manual de usuario
Murata
Murata IMX-070 Manual de usuario
Murata
Murata 1GC Manual de usuario
Murata
Murata Ps DMS-EB Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
