Multitech RF802 Manual de usuario

USB 11 Mbps Wireless Network Adapter

Model RF802USB

Quick Start Guide

Multi-Tech Systems, Inc.

USB 11Mbps Wireless Network Adapter

Model RF802USB

PN S0000231 Revision A

This publication may not be reproduced, in whole or in part, without prior

Multi-Tech Systems, Inc. makes no representations or warranties with respect to

the contents hereof, and specifically disclaims any implied warranties of

merchantability or fitness for any particular purpose. Furthermore, Multi-Tech

Systems, Inc. reserves the right to revise this publication and to make changes

from time to time in the content hereof without obligation of Multi-Tech

Systems, Inc. to notify any person or organization of such revisions or changes.

Revision Date Description

A 10/03/01 Initial Release

Patents

This product is covered by one or more of the following U.S. Patent Numbers:

6,219,708; 6,151,333; 5,757,801; 5,682,386. Other patents pending.

Trademarks

Trademark of Multi-Tech Systems, Inc. is the Multi-Tech logo.

Windows is a registered trademark of Microsoft.

Technical Support

Multi-Tech Systems has an excellent staff of technical support personnel

available to help you get the most out of your Multi-Tech product. If you have

any questions about the operation of this unit or experience difficulty during

installation, you can contact Tech Support via the following:

Country By Email By Telephone

France [email protected] (33) 1-64 61 09 81

India support@multitechindia.com (91) 124-340778

U.K. [email protected]o.uk (44) 118 959 7774

U.S. & Canada [email protected]m (800) 972-2439

Rest of World [email protected]om (763) 785-3500

World Headquarters

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, Minnesota 55112

(763) 785-3500 or (800) 328-9717

U.S. Fax 763-785-9874

http://www.multitech.com

Contents

Introduction.............................................................................................................. 1

What’s in Your Wireless USB Package .................................................................. 1

Safety ........................................................................................................................ 1

Wireless LAN Basics ............................................................................................... 2

Installation Overview ............................................................................................... 3

Software Installation for Windows 98/Me/2000 ..................................................... 3

Connecting the RF802USB to Your PC .................................................................. 4

Setting Network Properties in Windows 98/Me ..................................................... 5

Setting Network Properties in Windows 2000 ....................................................... 6

Configuration Utility ................................................................................................ 7

Configuration Tab .................................................................................................... 9

Encryption Tab....................................................................................................... 11

About Tab ............................................................................................................... 13

Technical Specification of the Wireless USB ...................................................... 14

Uninstall RF802USB Software .............................................................................. 16

Limited Warranty.................................................................................................... 18

Federal Communication Commission Interference Statement.......................... 19

Introduction

The Multi-Tech Systems, Inc. wireless USB adapter provides an ideal way to

connect your PC to a wireless network or as part of a wired LAN (Local Area

Network) with a wireless network segment. With the wireless USB, you will have

the ability to share information and resources, such as files and printers, and

take full advantage of a “connected” environment for work and play!

The USB adapter comes with drivers for most popular operating systems and

can be integrated into a large network.

This guide provides a quick introduction to wireless technology and its

application, and will assist you with the installation procedure when running

Windows 98/Me/2000.

What’s in Your Wireless USB Package

•Wireless USB Adapter

•This printed Quick Start Guide

•A CD-ROM containing Wireless USB configuration utility software, a complete

user guide, this quick start guide, and drivers. The Configuration Utility is

used for managing the Wireless USB and establishing the wireless connection

with your Access Point (e.g., an RF802EW).

Note: If anything is missing, please contact your vendor.

Safety

USB equipment is designed with the utmost care for the safety of those who

install and use it. However, special attention must be paid to the dangers of

electric shock and static electricity when working with electrical equipment. All

guidelines of this manual and of the computer manufacturer must, therefore, be

allowed at all times to ensure the safe use of the equipment.

Wireless Basics

Wireless LAN Basics

Wireless LAN (Local Area Networks) systems offer a great number of advantages

over a traditional, wired system. Wireless LANs (WLANs) are more flexible,

easier to setup and manage, and are often more cost effective than their wired

equivalent.

Using radio frequency (RF) technology, WLANs transmit and receive data over

the air, minimizing the need for wired connections. Thus, WLANs combine data

connectivity with user mobility, and, through simplified configuration, enable

movable LANs.

With wireless LANs, users can access shared information without looking for a

place to plug in, and network managers can set up or augment networks without

installing or moving wires. Wireless LANs offer the following productivity,

convenience, and cost advantages over traditional wired networks:

Mobility - Wireless LAN systems can provide LAN users with access to real-time

information anywhere in their organization; whether a home office, a small

office, or a large corporation. This mobility supports productivity and service

opportunities not possible with wired networks.

Installation Speed and Simplicity - Installing a wireless LAN system can be

fast and easy and can eliminate the need to pull cable through walls and

ceilings.

Installation Flexibility - Wireless technology allows the network to go where

wires cannot go.

Reduced Cost-of-Ownership - While the initial investment required for

wireless LAN hardware might be higher than the cost of wired LAN hardware,

overall installation expenses and life-cycle costs will be significantly lower. Long-

term cost benefits are greatest in dynamic environments requiring frequent

moves, add-ons, and changes.

Scalability - Wireless LAN systems can be configured to meet the needs of

specific applications and installations. Configurations are easily changed and

range from peer-to-peer networks suitable for a small number of users to full

infrastructure networks of thousands of users that allows roaming over a broad

area.

Installation

Installation Overview

A Pre-Installation Note: Make sure that the router, the RF802EW, to which

you will be “connected” is in place.

How the RF802EW Works With Your RF802USB: The RF802EW

connects with cables to the Internet and your local area network (LAN). It

is the wireless access point for your RF802USB. Your RF802USB

“connects” wirelessly to the RE802EW.

Installation: Here are some steps you will perform in establishing your wireless

network connection:

1. Install the RF802USB software using the installation CD-ROM included with

your package.

2. Connect the RF802USB to your PC.

3. Configure your RF802USB.

4. Set the network protocol(s) required to communicate on your network. In

most instances, you will be using the TCP/IP protocol.

Software Installation for Windows 98/Me/2000

These steps provide a quick summary of the software installation process. For

detailed installation steps with screen shots, see the chapter entitled Network

Basics.

Note: Some of these steps may vary in Windows 2000. For specific information

click Start > Help.

1. Power on your computer and allow Windows to load fully.

2. Be sure that there is no wireless USB connected to your computer yet.

3. Insert the given Installation CD. The Welcome/Setup screen displays.

Click Next.

4. Accept the license agreement. Click Next.

5. The Choose Destination Location screen displays. Enter the path of the

destination folder; or to set the path of your choice, click Browse.Then click

Next.

6. The Setup program will add an icon to the Program Folder. You may type a

new folder name or select one from the existing Folder list.

7. It takes a few seconds for the utility files to be copied. Then click Finish.

Installation

Connecting the RF802USB to Your PC

1. Plug a USB cable into the RF802USB and your PC.

2. A wizard will locate the new hardware (your RF802USB). Choose Display a

list of the known drivers for this device so that I can choose a

specific driver. Then click Next.

3. Select Hardware Types, and then click Next.

4. Click Wireless USB.

5. Click Have Disk.

6. Then enter the path name E:\ (where E is the CD-ROM drive of your

Notebook or PC). The driver files will be copied to this location. Click OK.

Installation

Setting Network Properties in Windows 98/Me

These steps provide a quick summary of the setting Network Properties process.

For detailed installation steps with screen shots, see the chapter entitled

Network Basics.

Note: See the steps for Windows 2000 Network Properties below.

1. Right-click Network Neighborhood from the desktop.

2. Select Properties from the context menu. The Network dialog box

displays and presents three main tabs: Configuration, Identification, and

Access Control.

3. Click the Configuration tab.

4. Click the Add button.

5. The Select Network Component Type dialog box displays.

6. Click Protocol, and then click the Add button.

7. The Select Network Protocols dialog box displays.

7a. From the list of manufactures, click on Microsoft.

7b. From the Network Protocols list, select TCP/IP, and then click OK.

8. The TCP/IP protocol is now installed. Click OK, and you will be returned to

Network Component Type dialog box.

9. Click the TCP/IP option for setting the IP address for your computer.

10. You can select either the Static or DHCP setting.

•If you use the Static IP setup, then enter the IP value, Subnet

masking, DNS, Domain/Workgroup name, and Gateway Address

values.

11. After setting these parameters, click OK to return to Network

Component Type.

12. You can now select the File and Printer Sharing options as well as the

Access to your computer. Access can be set for other users connected to

the network by setting the computer sharing options. Click OK.

13. The screen message Do you want to restart your computer will pop up.

Select Yes. Your computer will shut down and restart.

Installation

Setting Network Properties in Windows 2000

These steps provide a quick summary of the setting Network Properties process.

For detailed installation steps with screen shots, see the chapter entitled

Network Basics.

1. Right-click My Network Places from the desktop, and select Properties

from the context menu.

2. The Network dialog box displays. Click Local Area Connection à

Properties.

3. Click the TCP/IP option for setting the IP address for your computer.

4. You can select either Obtain an IP address automatically or Set your

own IP address.

•To obtain an IP address automatically, select this option, and the address

is automatically set up.

•To set your own IP address, enter the IP, Subnet Masking, DSN

server, and Default Gateway Address values. Then click OK.

5. You will be returned to the Network Component Type dialog box.

6. You can now select the File and Printer Sharing options as well as the

Access to your computer. Access can be set for other users connected to

the network by setting the computer sharing options. Click OK.

7. The screen message Do you want to restart your computer will pop up.

Select Yes. Your computer will shut down and restart.

Otros manuales para RF802

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Adaptador de Multitech

Multitech

Multitech MultiConnect SS MTS2SA-T Manual de usuario

Multitech

Multitech IWAY MT128ISA-SD Manual de usuario

Multitech

Multitech CallFinder CF220-DID Manual de usuario

Multitech

Multitech ZDXModemRack EN55022 Manual de usuario

Multitech

Multitech CallFinder CF220-DID Manual de usuario

Multitech

Multitech MultiConnect BT MTS2BTA Manual de usuario

Multitech

Multitech MultiConnect Adapter Manual de usuario

Multitech

Multitech MultiConnect BT MTS2BTA Manual de usuario

Multitech

Multitech MultiConnect Adapter Serial-to-Ethernet Adapter with... Manual de usuario

Multitech

Multitech RF802 Manual de usuario

Multitech

Multitech MultiModemISDN MTA128ST-USB Manual de usuario

Multitech

Multitech MultiConnect Adapter Manual de usuario

Multitech

Multitech IWay MTA128NT Manual de usuario

Multitech

Multitech MultiConnect BT MTS2BTA Manual de usuario

Multitech

Multitech MultiConnect SS MTS2SA-T Manual de usuario

Multitech

Multitech MultiModemISDN MTA128ST-USB Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario