MTD Troy-Bilt TB 360 Guía

Otros manuales de Cortacésped de MTD

Manuales populares de Cortacésped de otras marcas

RHINO

RHINO 1958 Manual de usuario

Wolf Garten

Wolf Garten Compact plus 40 B Manual de usuario

Cub Cadet

Cub Cadet LTX 1045 Manual de usuario

Craftsman

Craftsman 917.378461 Manual de usuario

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manual de usuario

Challenge

Challenge CH18V2 Instrucciones de operación

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manual de usuario

DEWEZE

DEWEZE ATM-725 Manual de operación

Weed Eater

Weed Eater 180083 Manual de usuario

Husqvarna

Husqvarna Poulan Pro PP185A42 Manual de usuario

Better Outdoor Products

Better Outdoor Products Quick Series Manual de usuario

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manual de funcionamiento

Toro

Toro Groundsmaster 3505-D Manual de usuario

Dennis

Dennis FT 610 Manual de usuario

AIRFORCE

AIRFORCE F-15 Gen 3 Manual de usuario

Toro

Toro 74806 Manual de usuario

Stihl

Stihl RMA 443 PV Manual de usuario

Yard-Man

Yard-Man 3700-0 Manual de usuario

A. Hold the blade control handle against

the premium drive control.

B. Slowly pull starter rope handle from engine and

slip starter rope into the rope guide.

C. Tighten rope guide wing knob.

D. Use clips to secure cables to lower handle.

778-13238B© 2015 12ABD3B

Note: Refer to your Operator’s Manual

for instructions on attaching the grass collector.

Note: Refer to your Operator’s Manual

for instructions on attaching the grass collector.

Note: Refer to your Operator’s Manual

for instructions on attaching the grass collector.

Starter

Rope Handle

Blade Control Handle

Premium Drive Control

Wing Nuts

T-Bolt

A. Remove the wing nuts and carriage bolts

securing the upper handle to the lower

handle.

A

B. Remove T-bolts from

the handle brackets. A

B

B

Pivot the upper

handle upward.

Pull upward

on the handle

until the

holes in lower

handle line up

with the holes

in the handle

bracket.

A. Insert the T-bolts removed in Step 1B

through the handle brackets to secure

the handle in place.

B. Secure upper handle

to lower handle with

wing nuts (on outside)

and carriage bolts

removed Step 1A.

A

B

D

A

C

B

14

2

5

3

READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.

PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY

AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING . Need Help? Call 1-888-TO-HELP-U

778-13238B© 2015 12ABD3B

Oil Fill /

Dipstick Gas Fill

Fill fuel tank with clean, fresh gasoline. Do not

fill above the base of fuel tank neck.

Pour the entire contents of the oil bottle (supplied)

into the oil fill. Check the oil level using the

dipstick. (Refer to the Operator’s Manual)

While standing behind the machine, pivot the Blade

Control Handle against the premium drive control.

Grasp the starter rope handle and pull with quick,

full-arm stroke. If the engine does not start after three

pulls, wait a few minutes and repeat.

Make sure the spark plug boot is connected to

the spark plug before attempting to start.

Spark Plug Boot

68

79

READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.

PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY

AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING . Need Help? Call 1-888-TO-HELP-U