MSI MS - 9211 Manual de usuario
1U Rackmount Server
MS - 9211
User’s Guide
Version 1.0
G52-S9211X1
ii
Manual Rev: 1.0
Release Date: December 2002
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct
the interference at his own expense.
Notice 1
The changes or modifications not expressly approved by the party respon-
sible for compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU
RESEAU.
Micro-Star International MS-9211
Tested to comply
with FCC Standard
For Home or Office Use
iii
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR
INTERNATIONAL. We take every care in the preparation of this document,
but no guarantee is given as to the correctness of its contents. Our products
are under continual improvement and we reserve the right to make changes
without notice.
Trademarks
All trademarks are the properties of their respective owners.
AMD, Athlon™, Athlon™ XP, Thoroughbred™, and Duron™ are registered
trademarks of AMD Corporation.
Intel®and Pentium®are registered trademarks of Intel Corporation.
PS/2 and OS®/2 are registered trademarks of International Business Machines
Corporation.
Microsoft is a registered trademark of Microsoft Corporation. Windows®98/
2000/NT/XP are registered trademarks of Microsoft Corporation.
Netware®is a registered trademark of Novell, Inc.
Award®is a registered trademark of Phoenix Technologies Ltd.
AMI®is a registered trademark of American Megatrends Inc.
Revision History
Revision Revision History Date
V1.0 First release December 2002
Technical Support
If a problem arises with your system and no solution can be obtained from the
user’s manual, please contact your place of purchase or local distributor.
Alternatively, please try the following help resources for further guidance.
Visit the MSI website for FAQ, technical guide, BIOS updates, driver
updates, and other information: http://www.msi.com.tw/
iv
1. Always read the safety instructions carefully.
2. Keep this User’s Manual for future reference.
3. Keep this equipment away from humidity.
4. Lay this equipment on a reliable flat surface before setting it up.
5. The openings on the enclosure are for air convection hence protects the
equipment from overheating. DO NOT COVER THE OPENINGS.
6. Make sure the voltage of the power source and adjust properly 110/220V
before connecting the equipment to the power inlet.
7. Place the power cord such a way that people can not step on it. Do not
place anything over the power cord.
8. Always Unplug the Power Cord before inserting any add-on card or module.
9. All cautions and warnings on the equipment should be noted.
10. Never pour any liquid into the opening that could damage or cause electri-
cal shock.
11. If any of the following situations arises, get the equipment checked by a
service personnel:
zThe power cord or plug is damaged.
zLiquid has penetrated into the equipment.
zThe equipment has been exposed to moisture.
zThe equipment has not work well or you can not get it work according
to User’s Manual.
zThe equipment has dropped and damaged.
zThe equipment has obvious sign of breakage.
12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
UNCONDITIONED,STORAGETEMPERATUREABOVE600
C(1400F),IT
MAY DAMAGE THE EQUIPMENT.
Safety Instructions
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
v
CONTENTS
FCC-B Radio Frequency Interference Statement ........................................... ii
Copyright Notice .......................................................................................... iii
Revision History ........................................................................................... iii
Technical Support ......................................................................................... iii
Safety Instructions ....................................................................................... iv
Chapter 1. Introduction ............................................................................. 1-1
Mainboard Specifications .................................................................... 1-2
Mainboard Layout ............................................................................... 1-4
Special Features ................................................................................... 1-5
PC Alert™ III ................................................................................. 1-5
D-LED™ (optional) ........................................................................ 1-6
LCD Front Panel Control ............................................................... 1-8
System Configuration ........................................................................ 1-18
Front View ................................................................................... 1-18
Rear View ..................................................................................... 1-20
Top View ...................................................................................... 1-21
Packing Checklist ............................................................................... 1-22
Chapter 2. Hardware Setup ....................................................................... 2-1
Central Processing Unit: CPU .............................................................. 2-2
CPU Core Speed Derivation Procedure ......................................... 2-2
Memory ................................................................................................ 2-3
Introduction to DDR SDRAM ....................................................... 2-3
DIMM Module Combination ......................................................... 2-4
Power Supply ....................................................................................... 2-5
ATX 20-Pin Power Connector: JWR1 ............................................ 2-5
ATX 12V Power Connector: JPW1 ................................................ 2-5
Back Panel ............................................................................................ 2-6
Mouse Connector ......................................................................... 2-6
Keyboard Connector ..................................................................... 2-7
vi
USB Connector .............................................................................. 2-7
Serial Port Connectors: COM1 & COM2 ....................................... 2-8
VGA DB 15 Pin Connector: VGA1 ................................................. 2-8
RJ-45 Lan Jacks: 10/100 LAN or Giga-bit LAN .............................. 2-9
Connectors ......................................................................................... 2-10
Floppy Disk Drive Connector: FDD1 ........................................... 2-10
Hard Disk Connectors: IDE1 & IDE2 ........................................... 2-11
ATA133 RAID Connectors: IDE3 & IDE4 (optional) ................... 2-12
Fan Power Connectors: CFAN1/SFAN1/PSFAN1 ....................... 2-13
Front Panel Connector: JFP1 ....................................................... 2-14
Front USB Connectors: JUSB2 & JUSB3 ..................................... 2-15
IrDA Infrared Module Header: IR2 .............................................. 2-17
Event Input Connector: J14 ......................................................... 2-17
LAN LED Connectors: JACT1 & JACT2 ..................................... 2-18
LCD Panel Connector: JLCD1 ...................................................... 2-18
Diagnostic LEDs: LED1, LED2, LED3, LED4 (optional) ............... 2-19
Server Management LEDs: LED5, LED6 ...................................... 2-19
Jumpers .............................................................................................. 2-20
Clear CMOS Jumper: JBAT1 ........................................................ 2-20
Slots ................................................................................................... 2-21
PCI Slot ........................................................................................ 2-21
PCI Interrupt Request Routing .................................................... 2-21
Chapter 3. BIOS Setup .............................................................................. 3-1
Entering Setup ...................................................................................... 3-2
Control Keys ................................................................................. 3-2
Getting Help .................................................................................. 3-3
The Main Menu ................................................................................... 3-4
Standard CMOS Features .................................................................... 3-6
IPMI V1.5 BIOS Features ..................................................................... 3-8
Advanced BIOS Features .................................................................. 3-10
vii
Advanced Chipset Features ............................................................... 3-14
Integrated Peripherals ........................................................................ 3-18
Power Management Setup ................................................................. 3-21
PnP/PCI Configurations ..................................................................... 3-24
PC Health Status ................................................................................ 3-26
Frequency/Voltage Control ................................................................ 3-27
Load Fail-Safe/Optimized Defaults ..................................................... 3-28
Set Supervisor/User Password ........................................................... 3-29
Chapter 4. Chassis Installation ................................................................ 4-1
System Assembly Flowchart ................................................................ 4-2
System Assembly ................................................................................ 4-4
Chassis Cover ............................................................................... 4-4
CPU, Heatsink and Fan Duct ......................................................... 4-5
DIMM ........................................................................................... 4-8
Hard Disk Drives ........................................................................... 4-9
Riser Card .................................................................................... 4-11
Rack Mounting .................................................................................. 4-13
Chassis Rails and Ears ................................................................ 4-13
Chassis into the Rack .................................................................. 4-14
Locking Tab ................................................................................. 4-15
1-1
Getting Started
Chapter 1. Getting
Started
Getting Started
Congratulations on your purchase of the MS-9211 1U
Rackmount Server. This high-performance barebone system
supports the powerful Intel®Pentium®4 processor and the
industry-leading hardwares and provides the most efficient
and professional solution to meet your needs.
1-2
MS-9211 1U Rackmount Server
Mainboard Specifications
CPU
hSupports Intel®P4 Northwood processor in 478-pin package
hSupports 1.5GHz~2.8GHz and up
Chipset
hIntel®845E chipset
- Support 100MHz/133MHz system clock
- Intel®NetBurst micro-architecture supports 400MHz/533MHz system bus
hIntel®ICH4 chipset
- Hi-Speed USB (USB2.0) controller, 480Mb/sec
- PCI Master 2.2
- I/O APIC
- 3 UHCI Host controllers and 1 EHCI Host controller
MainMemory
hSupports four memory banks using two 184-pin DDR DIMMs
hSupports up to 2GB PC2100/PC1600 DDR SDRAMs
hSupports 2.5v DDR SDRAM
Slots
hOne 32-bit Master PCI bus slot (support 3.3v/5v PCI bus interface)
On-BoardIDE
hAn IDE controller on the ICH4 chipset provides IDE HDD/CD-ROM with
PIO, Bus Master and Ultra DMA100/66/33 operation modes
hATA133 RAID supported by Promise PDC20276 controller
On-BoardPeripherals
hOn-Board Peripherals include:
- 1 serial port (COM 1 rear port)
- Two RJ-45 LAN ports
- 1 VGA port
- 1 IrDA connector for SIR/ASKIR/HPSIR
- Four USB 2.0 ports (Rear * 2/ Front * 2)
Video
hATI Rage™ XL graphics controller
- Built-in DVD decoding.
1-3
Getting Started
- Onboard 8MB video SDRAM.
LAN
hOption 1: Dual Intel®82551 10/100Mbps LAN controllers.
hOption 2: One Intel®82551 10/100Mbps LAN controller & One Intel®82540
1Gbps LAN controller.
Server Management(optional)
hNational Semiconductor®PC87431HM mBMC (mini-Baseboard Manage-
ment Controller)
- Incorporates an embedded microcontroller, three System Management
Bus (SMBus®) interfaces, a Chassis Management interface, Bi-color LED
control, an integrated EEPROM, Fan control, 12 ADC channels, and Dig-
ital Input Event and General-Purpose Output pins.
- Interfaces with the host via a slave SMBus interface; it interfaces with the
LAN On Motherboard (LOM) and with peripherals via two independent
master SMBus interfaces.
BIOS
hThe mainboard BIOS provides “Plug & Play” BIOS which detects the pe-
ripheral devices and expansion cards of the board automatically.
hThe mainboard provides a Desktop Management Interface (DMI) function
which records your mainboard specifications.
Mounting
h9 mounting holes.
Others
hSupport LAN wake-up function
hSupport Modem card wake-up function (external modem not supported)
hSupport IDE RAID (Ultra DMA/ATA133)
Devices
h2 35” IDE HDD cages
h1 Slim CD-ROM drive (optional)
h1 6x2 LCD Display Panel
PowerSupply
h200W Max. output
hActive PFC
hFullrange100~240V
Tabla de contenidos
Otros manuales de Servidor de MSI
MSI
MSI MS-9297 Manual de usuario
MSI
MSI MS-9249 Manual de usuario
MSI
MSI MS-9298 Manual de usuario
MSI
MSI MS-9282 Manual de usuario
MSI
MSI MS-9245 Manual de usuario
MSI
MSI MS-S2201 Manual de usuario
MSI
MSI K1-1000D Manual de usuario
MSI
MSI X2-106A3R Manual de usuario
MSI
MSI P1-109N-L70 Manual de usuario
MSI
MSI MS-S322 Manual de usuario
MSI
MSI MS-9246 Manual de usuario
MSI
MSI MS-9246 1U Manual de usuario
MSI
MSI MS-9258 Manual de usuario
MSI
MSI MS-9238 Manual de usuario
MSI
MSI MS-9218 Manual de usuario
MSI
MSI S2206 2U24 Manual de usuario
MSI
MSI MS-9266 Manual de usuario
MSI
MSI S1205 Manual de usuario
MSI
MSI MS-9252 Manual de usuario
MSI
MSI PM-104 Series Manual de usuario
