MSI MS-98D7 Manual de usuario
i
MS-98D7
COM Express Compact Module
ii
Preface
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR INTER-
NATIONAL. We take every care in the preparation of this document, but no guar-
antee is given as to the correctness of its contents. Our products are under con-
tinual improvement and we reserve the right to make changes without notice.
Trademarks
All trademarks are the properties of their respective owners.
MSI®is a registered trademark of Micro-Star Int’l Co.,Ltd.
NVIDIA®is a registered trademark of NVIDIA Corporation.
AMD®is a registered trademark of AMD Corporation.
Intel®is a registered trademark of Intel Corporation.
Windows®is a registered trademark of Microsoft Corporation.
AMI®is a registered trademark of Advanced Micro Devices, Inc.
Award®is a registered trademark of Phoenix Technologies Ltd.
Realtek®is a registered trademark of Realtek Semiconductor Corporation.
Revision History
Revision Date
V1.0 2014/05
Technical Support
If a problem arises with your system and no solution can be obtained from the
user’s manual, please contact your place of purchase or local distributor. Alterna-
tively, please try the following help resources for further guidance.
Visit the MSI website for technical guide, BIOS
updates, driver updates, and other information:
http://www.msi.com/service/download/
Contact our technical sta at:
http://support.msi.com/
￭
￭
￭
￭
￭
￭
￭
￭
iii
COM Express Compact Module
Safety Instructions
Always read the safety instructions carefully.
Keep this User’s Manual for future reference.
Keep this equipment away from humidity.
Lay this equipment on a reliable flat surface before setting it up.
The openings on the enclosure are for air convection hence protects the
equipment from overheating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source and adjust properly 110/220V
before connecting the equipment to the power inlet.
Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
Always Unplug the Power Cord before inserting any add-on card or mod-
ule.
All cautions and warnings on the equipment should be noted.
Never pour any liquid into the opening that could damage or cause electrical
shock.
If any of the following situations arises, get the equipment checked by ser-
vice personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well or you can not get it work according
to User’s Manual.
The equipment has dropped and damaged.
The equipment has obvious sign of breakage.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDI-
TIONED, STORAGE TEMPERATURE ABOVE 60oC (140oF), IT MAY DAM-
AGE THE EQUIPMENT.
警告使用者:
這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情
況下，使用者會被要求採取某些適當的對策。
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
￭
◯
◯
◯
◯
◯
◯
￭
iv
Preface
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH
Regulation (Regulation EC No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at:
http://www.msi.com/html/popup/csr/evmtprtt_pcm.html
Battery Information
European Union:
Batteries, battery packs, and accumulators should not be
disposed of as unsorted household waste. Please use the
public collection system to return, recycle, or treat them in
compliance with the local regulations.
Taiwan:
For better environmental protection, waste batteries should
be collected separately for recycling or special disposal.
California, USA:
The button cell battery may contain perchlorate material and requires special
handling when recycled or disposed of in California.
For further information please visit:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer.
v
COM Express Compact Module
CE Conformity
Hereby, Micro-Star International CO., LTD declares that this device
is in compliance with the essential safety requirements and other
relevant provisions set out in the European Directive.
FCC-A Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to
correct the interference at his own expense.
Notice 1
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
this device may not cause harmful interference, and
this device must accept any interference received, including interference that
may cause undesired operation.
WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and
Electronic Equipment, Directive 2002/96/EC, which takes effect on
August 13, 2005, products of “electrical and electronic equipment”
cannot be discarded as municipal waste anymore and manufacturers
of covered electronic equipment will be obligated to take back such products at
the end of their useful life. MSI will comply with the product take back require-
ments at the end of life of MSI-branded products that are sold into the EU. You
can return these products to local collection points.
1)
2)
vi
Preface
Contents
Copyright Notice............................................................................................ ii
Trademarks ................................................................................................... ii
Revision History ............................................................................................ ii
Technical Support.......................................................................................... ii
Safety Instructions.........................................................................................iii
Chemical Substances Information ............................................................... iv
Battery Information....................................................................................... iv
CE Conformity............................................................................................... v
FCC-A Radio Frequency Interference Statement ......................................... v
WEEE Statement .......................................................................................... v
1. Overview.......................................................................................1-1
Specifications.............................................................................................1-2
Layout ........................................................................................................1-4
Block Diagram............................................................................................1-5
2. Hardware Setup ...........................................................................2-1
Memory ......................................................................................................2-3
Connector...................................................................................................2-4
Hardware Installation ...............................................................................2-10
3. BIOS Setup...................................................................................3-1
Entering Setup ...........................................................................................3-2
The Menu Bar ............................................................................................3-4
Main ...........................................................................................................3-5
Advanced ...................................................................................................3-6
Boot..........................................................................................................3-13
Security ....................................................................................................3-14
Chipset.....................................................................................................3-19
Power .......................................................................................................3-21
Save & Exit...............................................................................................3-23
1-1-1
Thank you for choosing the MS-98D7, an excellent COM (computer-on-
module) Express Compact Module. Integrating core CPU and memory
functionality, it is the entry-level model for applications looking to transition
from other small form factor solutions to COM Express®and offers full
PCI Express, USB, SATA, audio, graphics and network support.
1Overview
1-2
Overview
Specications
Processor (Optional)
Intel Embedded Mobile Core i7/ i5/ i3/ Celeron Processor
Core i7-3615QE/ i7-3612QE/ i7-3555LE/ i7-3517UE
Core i5-3610ME
Core i3-3120ME/ i3-3217UE
Celeron
■
-
-
-
-
Chipset
Intel QM77 chipset■
Memory
1 DDR3/DDR3L 1066/1333/1600 MHz SO-DIMM slot
Supports non-ECC, unbuffered DDR3/DDR3L SO-DIMMs only
Supports the maximum of 8GB
■
■
■
LAN
PCH Integrated Gigabit LAN controller
Intel 82579LM Gigabit Fast Ethernet controller
■
■
Graphics
Graphics integrated in Intel processor■
EC
IT 8518 controller chip providing all PC-compatible I/O■
SATA
Supports 4 Serial ATA interfaces
2 SATA 6Gb/s ports, 2 SATA 3Gb/s ports
Integrated Advanced Host Controller Interface (AHCI) controller
■
-
-
USB
Supports 8 internal Universal Serial Bus (USB) ports (including one for Mini
PCIe card)
USB 3.0_Port 0, 1, 2, 3
USB 2.0_Port 0, 1, 2, 3, 4, 5, 6, 7
■
-
-
Digital Display Interface (DDI)
HDMI
DVI
DisplayPort
■
■
■
1-3
COM Express Compact Module
PCI Express Interface
PCIe x1
PCIe x16
■
■
Form Factor
COM Express Compact: 95mm x 95mm■
Environmental
Operating Temperature: 0oC ~ 60oC
Storage Temperature: -20oC ~ 80oC
Humidity: 5% ~ 90% RH, Non-Condensing
■
■
■
1-4
Overview
Layout
CPU
SO-DIMM Slot CPU Fan Connector
Tabla de contenidos
Otros manuales de Placa madre de MSI
MSI
MSI Creator X299 Manual de usuario
MSI
MSI B350M PRO-VD PLUS Manual de usuario
MSI
MSI K7N415 Pro Manual de usuario
MSI
MSI ms-7377 Manual de usuario
MSI
MSI MPG B550I GAMING EDGE WIFI Manual de usuario
MSI
MSI K8N Neo-V2 Manual de usuario
MSI
MSI H170M PRO-VD Manual de usuario
MSI
MSI K8NNeo2-FX Series Manual de usuario
MSI
MSI 955X Platinum Manual de usuario
MSI
MSI H410M PRO Manual de usuario
MSI
MSI K7N420 Pro Manual de usuario
MSI
MSI MS-7380 Manual de usuario
MSI
MSI Z170-A PRO Manual de usuario
MSI
MSI RS482M4-CSIP Manual de usuario
MSI
MSI MS-7043 Manual de usuario
MSI
MSI 945PL Neo Series Manual de usuario
MSI
MSI K9AGM2-F Manual de usuario
MSI
MSI 865PE NEO2-LS - Motherboard - ATX Manual de usuario
MSI
MSI MS-98B5 Manual de usuario
MSI
MSI PM8M2-V Series Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
