MSI MS-6785 Manual de usuario
1-1
Getting Started
Chapter 1. Getting
Started
Getting Started
Thank you for purchasing the MS-6785 v1.X Micro ATX
mainboard. The MS-6785 is based on SiS®648FX &SiS®963
chipsets for optimal system efficiency. Designed to fit the ad-
vanced Intel®Pentium®4 processors in the 478 pin package, the
MS-6785 delivers a high performance and professional desktop
platform solution.
1-2
MS-6785 M-ATX Mainboard
Mainboard Specifications
CPU
hSocket478forP4processorswith400/533/800MHz(100/133/200MHzQDIR).
hCore frequency up to 3.2GHz.
Chipset
hSiS®648FX (839pinBGA)
- Supports Intel®Pentium®4 processors with data transfer rate up to 800
MHz.
- Supports 64-bit high performance DDR400/333/266 memory controller.
- Supports AGP 8X/4X interface at 0.8v or 4x at 1.5v with fast write
transaction.
- Supports bi-directional 16-bit data bus with 1GHz bandwidth MuTIOL.
hSiS®963 (371pinBGA)
- Supports high throughput SiS MuTIOL 1GHz interconnecting to SiS®963
mediaI/O.
- Supports Dual-IDE ATA 66/100/133.
- Integrated Direct Sound AC97 audio.
- Low pin count interface for SIO.
- Advanced power management and PC2001 compliance.
- High speed USB 2.0 controller, 480Mb/s.
MainMemory
hSupports four memory banks using two 184-pin DDR DIMMs.
hSupports up to 2GB PC3200/2700/2100DDR SDRAMs.
hSupports 2.5v DDR SDRAM.
Slots
hOne AGP (Accelerated Graphics Port) slot
- Supports AGP 3.0 4x/8x.
hThree 32-bit PCI bus slots.
- Support 3.3v/5v PCI bus interface.
- The second PCI slot in BLUE supports 2 master devices.
On-BoardIDE
hDual IDE controllers integrated in SiS 963.
hSupports P/O, Bus Master, Ultra DMA66/100/133 operation.
hCan connect up to four IDE devices.
1-3
Getting Started
On-BoardPeripherals
hOn-Board Peripherals include:
- One floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes
- One serial port (COM A)
- One parallel port supports SPP/EPP/ECP mode (Optional)
- One RJ-45 LAN port
- Vertical audio ports
- One RCA_SPDIF In & one RCA_SPDIF Out
- Three 1394 ports [Rear x 2 (6 / 4 pins) + Front x 1 (6 pins)]
- Six USB 2.0 ports (Rear * 2/ Front * 4)
OnboardIEEE1394
hIntegrated in SiS®963.
hAgere FW803 PHY.
Audio
hS/W C-Media 9739A 5.1 channel with SPDIF in/out.
LAN
hVIA®VT6103LANcontroller.
BIOS
hThe mainboard BIOS provides “Plug & Play” BIOS which detects the pe-
ripheral devices and expansion cards of the board automatically.
hThe mainboard provides a Desktop Management Interface (DMI) function
which records your mainboard specifications.
Dimension
hMicro ATX Form Factor: 24.0 cm x 24.5 cm.
Mounting
h6 mounting holes.
1-4
MS-6785 M-ATX Mainboard
Mainboard Layout
MS-6785v1.X Micro ATX Mainboard
DDR1
DDR2
AGP Slot
SiS
648FX
Top : mouse
Bottom:keyboard
T: RJ45 LAN jack
B: USB ports
JSPDIF1
J9
CN8
1394port
Mini1394 port
JVEDIO1
Codec
VIA
VT6103
AGERE
FW803
BATT
+
BIOS
Winbond
83697HF
SiS
963
IDE1
IDE2
FDD1
PCI Slot1
PCI Slot2
PCI Slot3
JAUDIO1
CPUFAN1
JPW1
JLPT1
ATX
PowerSupply
JUSB1
F_P1
JBAT1
Line-Out
Line-Out
Line-Out
Line-Out
Line-Out
Line-Out
T:Mic
B:Line-In
T:SPDIF in
B:SPDIF out
2-1
Hardware Setup
Chapter 2. Hardware
Setup
Hardware Setup
This chapter provides you with the information about hard-
ware setup procedures. While doing the installation, be careful
in holding the components and follow the installation procedures.
For some components, if you install in the wrong orientation,
the components will not work properly.
Use a grounded wrist strap before handling computer
components. Static electricity may damage the components.
2-2
MS-6785 M-ATX Mainboard
Quick Components Guide
CPU, p.2-3
JPW1,p.2-9
Back Panel
I/O, p.2-10
CPUFAN1, p.2-17
DIMM1/2,
p.2-7
FDD1,
p.2-15
IDE2,
p.2-16
JUSB1,
p.2-19
F_P1,p.2-18JAUDIO1,p.2-22
JVIDEO1,p.2-18
PCI Slots,
p.2-25
AGP Slot,p.2-25
JSPDIF1,p.2-21
JBAT1,p.2-24
J7,p.2-23
CONN1,
p.2-9
J9,p.2-20
IDE1,
p.2-16
2-3
Hardware Setup
Central Processing Unit: CPU
CPU Core Speed Derivation Procedure
If CPU Clock = 100MHz
Core/Bus ratio = 14
then CPU core speed = Host Clock x Core/Bus ratio
= 100MHz x 14
= 1.4 GHz
MSI Reminds You...
Overheating
Overheating will seriously damage the CPU and system, al-
ways make sure the cooling fan can work properly to protect
the CPU from overheating.
Replacing the CPU
While replacing the CPU, always turn off the ATX power sup-
ply or unplug the power supply’s power cord from grounded
outlet first to ensure the safety of CPU.
Overclocking
This motherboard is designed to support overclocking. However,
please make sure your components are able to tolerate such
abnormal setting, while doing overclocking. Any attempt to
operate beyond product specifications is not recommended. We
do not guarantee the damages or risks caused by inadequate
operation or beyond product specifications.
The mainboard supports Intel®Pentium®4 processors in the 478 pin
package. The mainboard uses a CPU socket called PGA478 for easy CPU
installation. When you are installing the CPU, make sure the CPU has a heat
sink and a cooling fan attached on the top to prevent overheating. If you
do not find the heat sink and cooling fan, contact your dealer to purchase and
install them before turning on the computer.
2-4
MS-6785 M-ATX Mainboard
1. Please turn off the power and
unplug the power cord before
installing the CPU.
2. Pull the lever sideways away
from the socket. Make sure to
raise the lever up to a 90-de-
gree angle.
3. Look for the gold arrow. The
gold arrow should point to-
wards the lever pivot. The
CPU can only fit in the cor-
rect orientation.
4. If the CPU is correctly
installed, the pins should be
completely embedded into the
socket and can not be seen.
Please note that any violation
of the correct installation pro-
cedures may cause permanent
damages to your mainboard.
5. Press the CPU down firmly
into the socket and close the
lever. As the CPU is likely to
move while the lever is being
closed, always close the lever
with your fingers pressing
tightly on top of the CPU to
make sure the CPU is prop-
erly and completely embed-
ded into the socket.
CPU Installation Procedures for Socket 478
Open Lever
90 degree
Sliding
Plate
Close
Lever
Press down
the CPU
Gold arrow
Gold arrow
Gold arrow
Correct CPU placement
Incorrect CPU placement
X
O
2-5
Hardware Setup
Installing the CPU Fan
As processor technology pushes to faster speeds and higher performance,
thermal management becomes increasingly important. To dissipate heat, you
need to attach the CPU cooling fan and heatsink on top of the CPU. Follow the
instructions below to install the Heatsink/Fan:
2. Position the heatsink onto the reten-
tion mechanism.
1. Locate the CPU and its retention
mechanism on the motherboard.
3. Mount the fan on top of the heatsink.
Press down the fan until its four clips
get wedged in the holes of the reten-
tion mechanism.
4. Press the two levers down to fasten
the fan. Each lever can be pressed
down in only ONE direction.
retention mechanism
levers
2-6
MS-6785 M-ATX Mainboard
5. Connect the fan power cable from the mounted fan to the 3-pin fan power connector
on the board.
fan power cable
NOTES
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Placa madre de MSI
MSI
MSI MS-7304 Manual de usuario
MSI
MSI P55-GD55 Manual de usuario
MSI
MSI B760M PROJECT ZERO Manual de usuario
MSI
MSI Z370 SLI PLUS Manual de usuario
MSI
MSI MS-7082 Manual de usuario
MSI
MSI MAG B660 TOMAHAWK WIFI DDR4 Manual de usuario
MSI
MSI MAG B660M BAZOOKA Manual de usuario
MSI
MSI MS-7236 Manual de usuario
MSI
MSI P45 Neo2 Series Manual de usuario
MSI
MSI MPG X570 GAMING PRO CARBONWIFI Manual de usuario
MSI
MSI Z87M-G43 Series Manual de usuario
MSI
MSI 694D PRO Manual de usuario
MSI
MSI K8N Neo4-FX Manual de usuario
MSI
MSI A320M PRO-M2 Manual de usuario
MSI
MSI MS-7329 Manual de usuario
MSI
MSI MPG Z590 GAMING CARBON WIFI Manual de usuario
MSI
MSI G52-75221X5 Manual de usuario
MSI
MSI 745 Ultra-E Manual de usuario
MSI
MSI MAG B460 TORPEDO Manual de usuario
MSI
MSI MS-96B3 Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
