MSI MS-6528 LE Manual de usuario
i
Version 1.0
G52-MA00429
MS-6528 LE ATX Mainboard
MSI
MICRO-STAR INTERNATIONAL
ii
Manual Rev: 1.0
Release Date: August 2001
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct
the interference at his own expense.
Notice 1
The changes or modifications not expressly approved by the party respon-
sible for compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU
RESEAU.
Micro-Star International MS-6528 LE
Tested to comply
with FCC Standard
For Home or Office Use
iii
Edition
August 2001
Copyright Notice
The material in this document is the intellectual property of MICRO-
STAR INTERNATIONAL. We take every care in the preparation
of this document, but no guarantee is given as to the correctness of its
contents. Our products are under continual improvement and we re-
serve the right to make changes without notice.
Trademarks
All trademarks used in this manual are the property of their respective
owners.
Intel and Pentium are registered trademarks of Intel Corporation.
PS/2 and OS/2 are registered trademarks of IBM Corporation.
Windows 95/98/2000 and Windows NT are registered trademarks of Microsoft.
Netware is a registered trademark of Novell.
Award is a registered trademark of Award Software Inc.
Revision History
Revision Revision History Date
V1.0 First release August 2001
iv
1. Always read the safety instructions carefully.
2. Keep this User’s Manual for future reference.
3. Keep this equipment away from humidity.
4. Lay this equipment on a reliable flat surface before setting it up.
5. The openings on the enclosure are for air convection hence protects the
equipment from overheating. DO NOT COVER THE OPENINGS.
6. Make sure the voltage of the power source and adjust properly 110/220V
before connecting the equipment to the power inlet.
7. Place the power cord such a way that people can not step on it. Do not
place anything over the power cord.
8. Always Unplug the Power Cord before inserting any add-on card or module.
9. All cautions and warnings on the equipment should be noted.
10. Never pour any liquid into the opening that could damage or cause electri-
cal shock.
11. If any of the following situations arises, get the equipment checked by a
service personnel:
zThe power cord or plug is damaged
zLiquid has penetrated into the equipment
zThe equipment has been exposed to moisture
zThe equipment has not work well or you can not get it work according
to User’s Manual.
zThe equipment has dropped and damaged
zIf the equipment has obvious sign of breakage
12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
UNCONDITIONED,STORAGETEMPERATUREABOVE600
C(1400F),IT
MAY DAMAGE THE EQUIPMENT.
Safety Instructions
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
v
CONTENTS
Chapter 1. Introduction ............................................................... 1-1
Mainboard Specifications .......................................................... 1-2
Mainboard Layout ..................................................................... 1-4
Quick Components Guide ......................................................... 1-5
Connectors & Jumpers .............................................................. 1-6
Back Panel ............................................................................... 1-8
Chapter 2. AWARD® BIOS Setup ................................................. 2-1
Entering Setup .......................................................................... 2-2
Control Keys ............................................................................. 2-2
Getting Help .............................................................................. 2-3
The Main Menu ......................................................................... 2-4
Standard CMOS Features ......................................................... 2-5
Advanced BIOS Features .......................................................... 2-6
Advanced Chipset Features ...................................................... 2-7
Integrated Peripherals ............................................................... 2-8
Power Management Setup ........................................................ 2-9
PNP/PCI Configurations .......................................................... 2-10
PC Health Status .................................................................... 2-11
Frequency/Voltage Control ...................................................... 2-12
Load High Performance Defaults ............................................. 2-13
Load BIOS Setup Defaults ...................................................... 2-14
Set Supervisor/User Password ................................................ 2-15
Save & Exit Setup ................................................................... 2-17
Exit Without Saving ................................................................. 2-18
Introduction
1-1
Chapter 1.
Introduction 1
Mainboard Specifications 1-2
Mainboard Layout 1-4
Quick Components Guide 1-5
Connectors & Jumpers 1-6
Back Panel 1-8
The MS-6528 LE ATX mainboard is a high-performance computer
mainboard based on Intel®82845 & 82801BA chipsets. It is optimized to
support Intel®Pentium®4 processor in the 478 pin package that delivers a high
performance and professional desktop platform solution.
The Intel®82845 Memory Controller Hub (MCH) provides the processor
interface, SDRAM interface, AGP interface and hub interface. It supports: a
single processor with a data transfer rate of 400MHz, SDRAM at 133MHz
operation (PC133), AGTL+ host bus with integrated termination supporting
32-bit host addressing, 1.5V AGP interface with 4x data transfer and 4x fast
write capability, and 8-bit, 66MHz 4x hub interface to the Intel ICH2.
The 82801BA I/O Controller Hub 2 (ICH2) provides the I/O subsystem
with access to the rest of the system and additionally integrates many I/O
functions. It supports: upstream hub interface for access to the Intel MCH, 2-
channel Ultra ATA/100 bus master IDE controller, USB controller 1.1 (expanded
capabilities for 4 ports), I/O APIC, SMBus controller, FWH interface, LPC
interface, AC’97 2.1 interface, PCI 2.2 interface, and integrated system manage-
ment controller.
This chapter includes the following topics:
Chapter 1
1-2
Mainboard Specifications
CPU
zSupports Intel®Pentium®4 processor in the 478 pin package.
zSupports 1.3GHz, 1.4GHz, 1.5GHz, 1.6GHz, 1.7GHz, 1.8GHz, 1.9GHz, 2GHz
and up.
Chipset
zIntel®845 chipset (593 FC-BGA)
- Supports a single processor with a data transfer rate of 400MHz.
- Supports SDRAM at 133MHz operation (PC133).
- AGTL+ host bus with integrated termination supporting 32-bit host
addressing.
- 1.5V AGP interface with 4x data transfer and 4x fast write capability.
- 8-bit, 66MHz 4x hub interface to the Intel ICH2.
zIntel®ICH2 chipset (360 EBGA)
- Upstream hub interface for access to the Intel MCH.
- 2-channel Ultra ATA/100 Bus Master IDE controller.
- USB controller 1.1 (expanded capabilities for 4 ports).
- I/O APIC.
- SMBus controller.
- FWH interface.
- LPC interface.
- AC’97 2.1 interface.
- PCI 2.2 interface.
- Integrated system management controller.
Main Memory
zSupports three PC133 SDRAM sockets.
zSupports up to 3GB memory size.
Slots
zOne AGP (Accelerated Graphics Port) 4x slot.
zSix PCI 2.2 32-bit PCI bus slots (support 3.3v/5v PCI bus interface).
zOne CNR (Communication Network Riser) slot.
Note: The AGP slot does NOT support 3.3V AGP 2x card. Use of
3.3V AGP 2x card may cause damages to the mainboard.
Introduction
1-3
On-Board IDE
zAn IDE controller on the ICH2 chipset provides IDE HDD/CD-ROM with
PIO, Bus Master and Ultra DMA66/100 operation modes.
zCan connect up to four IDE devices.
On-Board Peripherals
zOn-Board Peripherals include:
- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes.
- 2 serial ports (COM A + COM B)
- 1 parallel port supports SPP/EPP/ECP mode
- 4 USB ports (Rear * 2/ Front * 2)
- 1 audio/game port
Audio
zC-Media CMI8738 / PCI-6ch supports 2/4/6 ch speaker (optional)
BIOS
zThe mainboard BIOS provides “Plug & Play” BIOS which detects the pe-
ripheral devices and expansion cards of the board automatically.
zThe mainboard provides a Desktop Management Interface (DMI) function
which records your mainboard specifications.
Dimension
zATX Form Factor 30.5cm x 23cm
Mounting
z6 mounting holes
Chapter 1
1-4
SFAN1
PSFAN1
CFAN1
JGL1
J2
BATT
+
ICH 2
DIMM1
DIMM2
DIMM3
ATXPowerSupply
FWH
PCI Slot 5
PCI Slot 4
PCI Slot 3
PCI Slot 2
PCI Slot 1
IDE2
IDE1
Winbond
W83627HF
USB
ports
Top : mouse
Bottom: keyboard
JCD1
CMI8738
JPW1
J6
J4
JBAT1
JAUX1
JPHN1
To p :
Game port
Bottom:
Line-Out
Line-In
Mic
FDD1
AGP Slot
Intel
845
chipset
JFP1
JWOL1
J9
JGS1
JMDM1
PCI Slot 6
CNR JUSB1
Mainboard Layout
MS-6528 LE ATX Mainboard
Introduction
1-5
Quick Components Guide
Component Function
JWR1 ATX 20-pin power connector
JPW1 ATX 12V power connector
JKBMS1 Mouse connector
JKBMS1 Keyboard connector
USB Connectors Connecting to USB devices
COM A & COM B Serial port connector
LPT1 Parallel port connector
FDD1 Floppy disk drive connector
J9 IrDA infrared module connector
IDE1~ IDE2 Hard disk connectors
JFP1 Case connector
JCD1 CD-in connector
JAUX1 Aux line-in connector
JPHN1 Modem-in connector
JGL1 Power saving LED connector
J2 TOP Tech. III
JGS1 Power saving switch connector
JMDM1 Wake on ring connector
JWOL1 Wake on LAN connector
CPU/PS/SYS FAN Fan power connectors
JUSB1 Connecting to USB devices
J8 (optional) D-Bracket connector
J4 Chassis intrusion switch connector
JBAT1 Clear CMOS jumper
J6 BIOS flash jumper
AGP Slot Connecting to AGP cards
PCI Slots Connecting to expansion cards
CNR Slot Connecting to expansion cards
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Placa madre de MSI
MSI
MSI MPG Z390M GAMING EDGE AC Manual de usuario
MSI
MSI A320M PRO-VD Manual de usuario
MSI
MSI K8MM2 Manual de usuario
MSI
MSI MS-6570E Manual de usuario
MSI
MSI KT880 Delta Manual de usuario
MSI
MSI MS-6380LE Manual de usuario
MSI
MSI K9N SLI V2 Series Manual de usuario
MSI
MSI MS-98F6 Manual de usuario
MSI
MSI ATX IR1 Manual de usuario
MSI
MSI Z270 GAMING PLUS Manual de instrucciones
MSI
MSI K7N2 Delta2 - Motherboard - ATX Manual de usuario
MSI
MSI Eclipse Plus Series Manual de usuario
MSI
MSI H61M-E23 (G3) Series Manual de usuario
MSI
MSI K9A2 CF Manual de usuario
MSI
MSI 845G Max Manual de usuario
MSI
MSI MS-98E3 Manual de usuario
MSI
MSI 870A-G54 series Manual de usuario
MSI
MSI B450M PRO-VDH PLUS Manual de usuario
MSI
MSI VB9 Manual de usuario
MSI
MSI ATX BX10 Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
