MSI MS-6390 Manual de usuario
i
G52-M6390X2
MS-6390 (v3.X)
M-ATXMainboard
ii
ManualRev:3.0
Release Date: February 2004
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct
the interference at his own expense.
Notice 1
The changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
VOIRLANOTICED’INSTALLATIONAVANTDERACCORDERAURESEAU.
Micro-StarInternational MS-6390
Testedtocomply
withFCCStandard
ForHomeorOfficeUse
iii
CopyrightNotice
The material in this document is the intellectual property of MICRO-STAR
INTERNATIONAL. We take every care in the preparation of this document,
but no guarantee is given as to the correctness of its contents. Our products
are under continual improvement and we reserve the right to make changes
without notice.
Trademarks
All trademarks are the properties of their respective owners.
AMD, Athlon™, Athlon™ XP, Thoroughbred™, and Duron™ are registered
trademarks of AMD Corporation.
PS/2 and OS®/2 are registered trademarks of International Business Machines
Corporation.
Microsoft is a registered trademark of Microsoft Corporation. Windows®98/
2000/NT/XP are registered trademarks of Microsoft Corporation.
NVIDIA, the NVIDIA logo, DualNet, and nForce are registered trademarks or
trademarks of NVIDIA Corporation in the United States and/or other countries.
Netware®is a registered trademark of Novell, Inc.
Award®is a registered trademark of Phoenix Technologies Ltd.
AMI®is a registered trademark of American Megatrends Inc.
Revision History
Revision Revision History Date
V3.0 First release with PCB 3.0 February2004
TechnicalSupport
If a problem arises with your system and no solution can be obtained from the
user’s manual, please contact your place of purchase or local distributor.
Alternatively, please try the following help resources for further guidance.
hVisit the MSI website for FAQ, technical guide, BIOS updates, driver
updates, and other information: http://www.msi.com.tw/
hContact our technical staff at: [email protected]
iv
1. Always read the safety instructions carefully.
2. Keep this User’s Manual for future reference.
3. Keep this equipment away from humidity.
4. Lay this equipment on a reliable flat surface before setting it up.
5. The openings on the enclosure are for air convection hence protects the
equipmentfromoverheating. DONOTCOVERTHEOPENINGS.
6. Make sure the voltage of the power source and adjust properly 110/220V
before connecting the equipment to the power inlet.
7. Place the power cord such a way that people can not step on it. Do not
place anything over the power cord.
8. Always Unplug the PowerCordbeforeinsertingany add-on card ormodule.
9. All cautions and warnings on the equipment should be noted.
10. Never pour any liquid into the opening that could damage or cause electri-
cal shock.
11. If any of the following situations arises, get the equipment checked by a
service personnel:
zThe power cord or plug is damaged.
zLiquid has penetrated into the equipment.
zThe equipment has been exposed to moisture.
zThe equipment has not work well or you can not get it work according
to User’s Manual.
zThe equipment has dropped and damaged.
zThe equipment has obvious sign of breakage.
12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
UNCONDITIONED,STORAGETEMPERATUREABOVE600C(1400F),IT
MAYDAMAGETHEEQUIPMENT.
Safety Instructions
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
v
CONTENTS
FCC-B Radio Frequency Interference Statement ............................................ii
Copyright Notice ........................................................................................... iii
Trademarks .................................................................................................... iii
Revision History ........................................................................................... iii
Technical Support ......................................................................................... iii
Safety Instructions ....................................................................................... v
Chapter1.GettingStarted ........................................................................ 1-1
Mainboard Specifications .................................................................... 1-3
Mainboard Layout ...............................................................................1-4
Chapter2.HardwareSetup ....................................................................... 2-1
Quick Components Guide .....................................................................2-2
Central Processing Unit: CPU ..............................................................2-3
CPU Core Speed Derivation Procedure..........................................2-3
CPU Installation Procedures for Socket 462 ..................................2-4
Installing AMD Athlon CPU (Socket 462) Cooler Set ....................2-5
Setting CPU Clock Frequency through Jumper .............................2-6
Memory................................................................................................2-7
Introduction to DDR SDRAM........................................................2-7
DIMM Module Combination.........................................................2-8
Installing DDR Modules ................................................................2-8
Power Supply .......................................................................................2-9
ATX 20-Pin Power Connector: CONN1 .........................................2-9
ATX 12V Power Connector: JPW1 ................................................2-9
BackPanel .......................................................................................... 2-10
Mouse/Keyboard Connector ...................................................... 2-10
USB Connectors .......................................................................... 2-11
RJ-45LANJack ........................................................................... 2-11
Serial Port Connector: COM A .................................................... 2-12
VGADB15PinConnector ........................................................... 2-12
vi
Parallel Port Connector: LPT1...................................................... 2-13
Audio Port Connectors ............................................................... 2-14
Connectors......................................................................................... 2-15
Floppy DiskDrive Connector: FDD1 ............................................ 2-15
Internal Speaker Connector: JSP1................................................ 2-15
Hard Disk Connectors: IDE1 & IDE2........................................... 2-16
Fan Power Connectors: CPUFA1/SYSFA1 .................................. 2-17
CD-InConnector:JCD1 ............................................................... 2-18
Aux Line-In Connector: JAUX1 .................................................. 2-18
Front Microphone Connector: JFMIC......................................... 2-18
Front Panel Connector: JFP1 ....................................................... 2-19
Front USB Connector: JUSB1...................................................... 2-20
Jumpers .............................................................................................. 2-21
Clear CMOSJumper: JBAT1 ........................................................ 2-21
FSBClockJumper: SW1 .............................................................. 2-22
ClearBIOSPasswordJumper:JPWD1 ......................................... 2-23
Slots ................................................................................................... 2-24
AGP (Accelerated Graphics Port) Slot ......................................... 2-24
PCI (Peripheral Component Interconnect) Slots.......................... 2-24
PCI Interrupt Request Routing .................................................... 2-25
Chapter3.BIOSSetup.............................................................................. 3-1
Entering Setup......................................................................................3-2
Control Keys ................................................................................. 3-2
Getting Help .................................................................................. 3-3
Main .....................................................................................................3-4
Advanced............................................................................................. 3-6
Power ................................................................................................. 3-10
Boot ................................................................................................... 3-11
Exit ...................................................................................................... 3-13
1-1
Getting Started
Chapter 1. Getting
Started
Getting Started
Thank you for purchasing the MS-6390 v3.X Micro ATX
mainboard. The MS-6390 is based on VIA®KM266 & VT8235
chipsets for optimal system efficiency. Designed to fit the ad-
vancedAMD®Athlon™,Athlon™XPor Duron™ processors,
the MS-6390 delivers a high performance and professional desk-
top platform solution.
1-2
MS-6390 M-ATX Mainboard
6390 M-ATX Mainboard
Mainboard Specifications
CPU
hSupports Socket A (Socket-462) for AMD®Athlon™/Athlon™ XP/Duron™
processors.
hSupports up to 2600+ or higher speed.
Chipset
hVIA®KM266 North Bridge
-200/266MHzFSB.
- Integrated ProSavage8 2D/3D graphic controller.
- AGP 4x and high bandwidth V-link host controller.
- Advanced memory controller supports PC1600/2100 DDR.
hVIA®VT8235 South Bridge
- High bandwidth V-link client controller.
- Direct sound ready AC97 digital audio controller.
-UltraDMA66/100/133mastermodeEIDEcontroller.
- Supports both ACPI and legacy APM power management.
- Hi-Speed USB 2.0 controller, 480Mb/sec.
- Integrated Ethernet MAC.
MainMemory
hSupports four memory banks using two 184-pin DDR DIMMs.
hSupports up to 2GB PC2100/1600 DDR SDRAMs.
hSupports 2.5v DDR SDRAM.
Slots
hOne AGP (Accelerated Graphics Port) slot.
hThree 32-bit Master PCI bus slots (support 3.3v/5v PCI bus interface).
On-BoardIDE
hAn IDE controller on the VT8235 chipset provides IDE HDD/CD-ROM with
PIO, Bus Master and Ultra DMA 66/100/133 operation modes.
hCan connect up to four IDE devices.
On-BoardPeripherals
hOn-Board Peripherals include:
- One floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes
1-3
Getting Started
- One serial port (COM A)
-OneVGA port
- One parallel port supports SPP/EPP/ECP mode
- One RJ-45 LAN port
- Vertical audio ports
- One 3-pin internal speaker connector
- Six USB 2.0 ports (Rear * 4/ Front * 2)
Audio
h5.1 channel AC’97 software audio integrated on VT8235 south bridge.
hRealTekALC6506-channelaudio.
LAN
hVIA®VT8235integrated MAC+VT6103PHY.
BIOS
hThe mainboard BIOS provides “Plug & Play” BIOS which detects the pe-
ripheral devices and expansion cards of the board automatically.
hThe mainboard provides a Desktop Management Interface (DMI) function
which records your mainboard specifications.
Dimension
hMicroATX Form Factor: 24.5cm x 21.7cm.
Mounting
h6 mounting holes.
1-4
MS-6390 M-ATX Mainboard
6390 M-ATX Mainboard
Mainboard Layout
MS-6390 v3.X Micro ATX Mainboard
SOCKET462
JFMIC
Top: Mouse
Bottom: Keyboard
USB Ports
T: RJ45 LAN Jack
B: USB Ports
JCD1
JAUX1
JSP1
Codec
VIA
VT6103
AGP Slot
BATT
+
BIOS
Winbond
83697HF
VT8235
VIA
KM266
IDE1
IDE2FDD1
PCI Slot 1
PCI Slot 2
PCI Slot 3
JFP1 JUSB1
CPUFA1
SYSFA1
JPW1
CONN1
JBAT1
JPWD1
SW1
Line-Out
Line-In
Mic
Top: LPT
Bottom:
COM A
VGA Port
DIMM1
DIMM2
Otros manuales para MS-6390
2
Tabla de contenidos
Otros manuales de Placa madre de MSI
MSI
MSI PRO Z690-P WIFI Manual de usuario
MSI
MSI B650 GAMING PLUS WIFI Manual de usuario
MSI
MSI MPG X570 GAMING PLUS Manual de usuario
MSI
MSI MS-98H6 Manual de usuario
MSI
MSI G31M Series Manual de usuario
MSI
MSI MEG B550 UNIFY Manual de usuario
MSI
MSI B75IA-E33 Series Manual de usuario
MSI
MSI Z87M-G43 Series Manual de usuario
MSI
MSI Z170A GAMING PRO CARBON Manual de usuario
MSI
MSI PRO Z690-A WIFI DDR4 Manual de usuario
MSI
MSI MEG X570S UNIFY-X MAX Manual de usuario
MSI
MSI B450M BAZOOKA Manual de usuario
MSI
MSI Bg Bang-XPower II Manual de usuario
MSI
MSI 694T Pro Manual de usuario
MSI
MSI RS482M4-CSIP Manual de usuario
MSI
MSI X99A GODLIKE GAMING CARBON Manual de usuario
MSI
MSI MPG Z790 EDGE WIFI DDR4 Manual de usuario
MSI
MSI K7N415 Pro Manual de usuario
MSI
MSI G31P Neo2 Series Manual de usuario
MSI
MSI PRO B660M-A WIFI DDR4 Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
