MSI MS-6198 Manual de usuario
CHAPTER 1 INTRODUCTION
1-1
Chapter 1
INTRODUCTION
The MS-6198 Micro ATX VA3 mainboard is a high-performance computer
mainboard based on VIA®VT82C694X chipset. The MS-6198 is designed
for the Intel®CeleronTMor Coppermine(FC-PGA) processor for inexpensive
business/personal desktop markets.
TheApolloPro133A(VT82C694X)isaSocket-370systemlogicnorthbridge
with the addition of 133 MHz capability for both the CPU and SDRAM
interfaces. Apollo Pro133A may be used to implement both desktop and
notebook personal computer systems from 66MHz to 133MHz based on
Socket-370 (Intel Celeron processors). The primary features of the Apollo
Pro133A-NorthBridgeare:Slot-1orSocket-370CPU(FrontSideBus)
Interface(66/100/133MHz),SDRAMMemoryInterface(66/100/
133MHz),AGPBusInterface(66MHz),PCIBusInterface (33MHz), Mobile
Power Management.
TheVT82C686APSIPC (PCI Super-I/O Integrated Peripheral Controller)isa
high integration, high performance, power-efficient, and high compatibility
device that supports Intel and non-Intel based processor to PCI bus bridge
functionality to make a complete Microsoft PC99-compliant PCI/ISA system.
CHAPTER 1 INTRODUCTION
1-2
1.1 Mainboard Features
CPU
lSocket 370 for Intel®CeleronTM/CoppermineTM processor.
lSupports233MHz,266MHz, 300MHz,333MHz,350MHz,400MHz,
450MHz,500MHZ, 533MHz.,550MHz,667MHz orfasterprocessor.
Chipset
lVIA®694Xchipset. (510 BGA)
-FSB@133MHz
-AGP 4x and PCI plus Advanced ECC Memory Controller
-Support PC100/133 SDRAM technology
lVIA®VT82C686Achipset.(352BGA)
- Advanced Power Management Features
-IntegratedSuperI/O(FDC,LPT,COM 1/2, and IR)
- DirectSound AC97 Audio
- Dual bus Master IDE Ultra DMA33/66
-ACPI
ClockGenerator
l66.6/100/133MHzand133Mhzclocksaresupported.
MainMemory
lSupport four memory banks using two 168-pin unbuffered DIMM.
lSupporta maximummemory sizeof1GB.
lSupportECC(1-bitErrorCodeCorrect)function.
lSupport 3.3v SDRAM DIMM.
Slots
lOne AGP(Accelerated Graphics Port) slot.
- AGP specification compliant
- AGP66/133/266MHz3.3vdevicesupport
lThree 32-bit Master PCI Bus slots and one 16-bit ISA slot(wherein one
shared slot can be used as PCI or ISA).
lSupports 3.3v/5v PCI bus Interface.
CHAPTER 1 INTRODUCTION
1-3
On-BoardIDE
lAnIDE controller on the VIA®VT82C686AChipset provides IDE HDD/
CD-ROM with PIO, Bus Master and Ultra DMA 33/66 operation modes.
lCan connect up to four IDE devices.
On-BoardPeripherals
lOn-BoardPeripherals include:
-1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes.
-2 serial ports (COMA + COMB)
- 1 parallel port supports SPP/EPP/ECP mode
- 2 USB ports (reserved 2 USB Front Pin Header)
- 1 IrDA/HP connector for SIR.
Audio
lChip Integrated
lDirect Sound AC97’ Audio
BIOS
lThe mainboard BIOS provides “Plug & Play” BIOS which detects the
peripheral devices and expansion cards of the board automatically.
lThe mainboard provides a Desktop Management Interface(DMI) function
which records your mainboard specifications.
Dimension
lMicro-ATXForm Factor:24.4cm(L) x20cm (W)
Mounting
l6 mounting holes.
CHAPTER 1 INTRODUCTION
1-4
1.2 Mainboard Layout
PCI SLOT 3
PCI SLOT 2
PCI SLOT 1
ATX
Power Supply
VIA
694X
chipset
Socket 370
DIMM 2
Top: mouse
Bottom:
keyboard
Top:Port1
USB
IDE2
Bottom:
Port2
IDE1
FDD1
VT82C686A
JMDM1 JBAT1
JWOL1
JCD1
JAUX1
CPUFAN
SYSFAN
Top: LPT
Bottom:
COMA
COMB
Top: Midi/
GamePort
Bottom:
Line-Out
Line-In
Mic
JPHONE
J1
BIOS
AGP Slot
BATT
USB2
DIMM 1
ISA SLOT
JFP1
MS-6198MicroATXVA3Mainboard
JGS1
HARDHARD
HARDHARD
HARDWW
WW
WARE INSTARE INST
ARE INSTARE INST
ARE INSTALLAALLA
ALLAALLA
ALLATIONTION
TIONTION
TION
2-1
Hardware Installation
This chapter provides you with the information about hardware setup
procedures. During installation, be careful when handling the components
and follow the installation procedures properly. For some components,
installing it in a wrong orientation will cause it to become unstable.
Remember to use a grounded wrist strap before handling computer
components. Static electricity may damage the components.
Central Processing nit (CP ) 2-2
Memory Installation 2-5
Back Panel 2-8
Connectors 2-13
Power Supply 2-21
Jumpers 2-22
Slots 2-25
Chapter 2 contains the following topics:
CHAPTER 2CHAPTER 2
CHAPTER 2CHAPTER 2
CHAPTER 2
2-2
3. Press the lever down to
complete the installation.
2. Locate Pin 1 in the socket
and look for the white dot or
cut edge in the CP . Match
Pin 1 with the white dot/cut
edge. Then, insert the CP .
It should insert easily.
1. Pull the lever sideways away
from the socket. Then, raise
the lever up to a 90-degree
angle.
••
••
• CPU Installation Procedures
+27
+27
Open Lever
Pin 1
Sliding
Plate
White dot/
Cut edge
Close
Lever
Pin 1
Central Processing Unit: CPU
The mainboard operates with Intel® CeleronTM/Coppermine
processor. The mainboard uses a CP socket called Socket 370 for easy
CP installation. The CP should always have a Heat Sink and a cooling
fan attached to prevent overheating.
HARDHARD
HARDHARD
HARDWW
WW
WARE INSTARE INST
ARE INSTARE INST
ARE INSTALLAALLA
ALLAALLA
ALLATIONTION
TIONTION
TION
2-3
• CPU Speed Setting: SW1
To set the proper speed and voltage of the CP , you must know the
specifications of your CP (always ask your reseller for CPU
specifications).
SW1
ONOFF
14 32
EC E ON
CHAPTER 2CHAPTER 2
CHAPTER 2CHAPTER 2
CHAPTER 2
2-4
• CPU Core Speed Derivation Procedure
If the CP Core/Bus ratio is already fixed, adjusting the SW1 will not
change the CP Core/Bus ratio. If the Core/Bus ratio is not fixed by
the CP , then you can adjust the SWI to change the Core/Bus ratio.
If CP Clock = 66MHz
Core/Bus ratio = 3.5
then CP core speed = Host Clock x Core/Bus ratio
= 66MHz x 3.5
= 233MHz
4 3 2 1 Core/Bus Ratio
ON ON OFF ON 3
ON OFF OFF ON 3.5
ON ON ON OFF 4
ON OFF ON OFF 4.5
ON ON OFF OFF 5
ON OFF OFF OFF 5.5
OFF ON ON ON 6
OFF OFF ON ON 6.5
OFF ON OFF ON 7
OFF OFF OFF ON 7.5
OFF ON ON OFF 8
SW1 CPU
HARDHARD
HARDHARD
HARDWW
WW
WARE INSTARE INST
ARE INSTARE INST
ARE INSTALLAALLA
ALLAALLA
ALLATIONTION
TIONTION
TION
2-5
Memory Installation
••
••
• Memory Bank Configuration
The mainboard supports a maximum memory size of 1GB (256-bit
technology) for SDRAM: It provides two 168-pin unbuffered DIMMs
(Double In-Line Memory Module) sockets. It supports 8 MB to 512
Mbytes DIMM memory module.
DIMM1
DIMM2
••
••
• Memory Population ules
1. Supports only SDRAM DIMM.
2. To operate properly, at least one 168-pin DIMM module must be
installed.
3. This mainboard supports Table Free memory, so memory can be
installed on DIMM1 or DIMM 2 in any order.
4. Supports 3.3 volt DIMM.
CHAPTER 2CHAPTER 2
CHAPTER 2CHAPTER 2
CHAPTER 2
2-6
How to install a IMM Module
1. The DIMM slot has 2 Notch Keys VOLT and DRAM, so the
DIMM memory module can only fit in one direction.
2. Insert the DIMM memory module vertically into the DIMM slot.
Then push it in.
3. The plastic clip at the side of the DIMM slot will automatically
close.
Single Sided DIMM
Double Sided DIMM
VOLTDR M
••
••
• Memory Installation Procedures
Otros manuales para MS-6198
2
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Placa madre de MSI
MSI
MSI MS-9105 Manual de usuario
MSI
MSI 850 Pro2 Manual de usuario
MSI
MSI KT4M Manual de usuario
MSI
MSI Z170M MORTAR Manual de usuario
MSI
MSI MS-6526 Manual
MSI
MSI K7 Master MS-6341 Manual de usuario
MSI
MSI H55M-E32 Manual de usuario
MSI
MSI MS-99A1 Manual de usuario
MSI
MSI MS-6526 Manual de usuario
MSI
MSI Z170A KRAIT GAMING Manual del operador
MSI
MSI PRO A620M-B Manual de usuario
MSI
MSI B150M MORTAR ARCTIC Manual de usuario
MSI
MSI MAG B460 TORPEDO Manual de usuario
MSI
MSI 648M-IL Manual de usuario
MSI
MSI E7505 Master-LS2 Manual de usuario
MSI
MSI MS-98J4 Manual de usuario
MSI
MSI 661FM3-V Series Manual de usuario
MSI
MSI K9N2 Diamond Series Manual de usuario
MSI
MSI MS-6395 Manual de usuario
MSI
MSI 845E Max2 Series Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
