MSI MS-6117 Manual de usuario
CHAPTER 1 INTRODUCTION
1-1
The MS-6117 is a high-performance personal computer mainboard based on
the Pentium®II processor.
The mainboard uses the highly integrated Intel®82440LX AGPset which
optimize the system bandwidth and concurrency with the implementation of
Quad Port Acceleration (QPA). QPA provides 4-port concurrent arbitration
of the processor bus, graphics, PCI bus and SDRAM.
The Intel®82371AB chipset integrates all system control functions such as
ACPI (Advanced Configuration and Power Interface). The ACPI provides
more Energy Saving Features for the OSPM(OS Direct Power Management)
function. The Intel®82371AB chipset also improves the IDE transfer rate by
supporting Ultra DMA/33 IDE that transfers data at the rate of 33MB/s.
The mainboard also supports the LM78 System Hardware Monitor
Controller as optional function. The LM78 function includes: CPU /power
supply/chassis fan revolution detect, CPU/system voltage monitor, system
temperature monitor, and chassis intrusion detect(optional).
Chapter 1
INTRODUCTION
CHAPTER 1 INTRODUCTION
1.1 Mainboard Features
CPU
lSlot 1 for Pentium®II processor.
lSupports200MHz,233MHz,266MHz,300MHz,and333MHz.
lCore/Busratiosare x2,x2.5,x3,x3.5,x4,x4.5,x5,x5.5,x6and higher.
SwitchingVoltageRegulator
lOn-board switching mode DC-DC Step Down Regulator.
lConforms to Intel®VRM ver 8.1 specifications.
lOver-Voltage and Over-Current protection.
ChipSet
lIntel®82440LX PCI Chipset.
ClockGenerator
l66.6MHz clocks are supported.
MainMemory
lSupports six memory banks using three 168-pin unbuffered DIMM
sockets.
lSupportsamaximum memory sizeof 512MB withSDRAM, or 1GBwith
EDO.
lSupportsECC(Error Check Correct)and EC(Multiple-BitError Correction)
function.
lSupports 3.3v Extended Data Output (EDO) and SDRAM DIMM.
Slots
lOne AGP(Accelerated Graphics Port) slot.
- AGP specification compliant
- AGP66/133MHz 3.3v device support
lFive 32-bit Master PCI Bus slots and two 16-bit ISA bus slots wherein
one shared slot that can be used as ISA or PCI.
lSupports 3.3v/5v PCI bus Interface.
1-2
CHAPTER 1 INTRODUCTION
1-3
On-BoardIDE
lAn IDE controller on the Intel®82371AB PCI Chipset provides IDE HDD/
CD-ROM with PIO, Bus Master and Ultra DMA/33 operation modes.
lCan connect up to four IDE devices.
On-BoardPeripherals
lOn-BoardPeripherals include:
- 1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes.
-2 serial ports (COMA + COMB)
- 1 parallel port supports SPP/EPP/ECP mode
- 2 USB ports
- 1 IrDA connector for SIR.
BIOS
lThe mainboard BIOS provides “Plug & Play” BIOS which detects the
peripheral devices and expansion cards of the board automatically.
lThe mainboard provides a Desktop Management Interface(DMI) function
which records your mainboard specifications.
On-BoardSystemHardwareMonitor(LM78)
lCPU/Power Supply/Chassis Fan Revolution Detect
lCPU Fan Control (the fan will automatically stop when the system enters
suspend mode)
lSystem Voltage Detect
lChassis Intrusion Detect(reserved)
lDisplay Actual Current Voltage
RTC
lNon-VolatileRTC.
KeyboardConnector
lPS/2®keyboard interface and PS/2®mouse interface.
CHAPTER 1 INTRODUCTION
1-4
Dimension
lATXForm Factor: 30.5cm(L) x 18.6cm(W) x 4 layers PCB.
lDouble deck I/O connectors, compatible with Intel®Venus Mainboard.
Mounting
l6 mounting holes.
CHAPTER 1 INTRODUCTION
1.2 Mainboard Layout
MS-6117
FDC
IDE2
IDE1
DIMM 3
DIMM 2
DIMM 1
Top: mouse
Bottom:
keyboard
Top: Port1
USB
Bottom:
Port2
Top: LPT
Bottom:
COM A
COM B
ATX
Power Supply
CFAN1
PSFAN1
LM78
(optional)
PCI SLOT 3
PCI SLOT 2
PCI SLOT 1
SLOT 1
AGP
PCI SLOT 5
PCI SLOT 4
JGS1
JGL1
ISA SLOT 1
ISA SLOT 2
BATT
+
LM75
(optional)
BIOS
JMODE1
SFAN1
IR1
JFAN
JSW2
SW1
Clock
Generator
J10 J9
JFP1
FW82371AB
JBAT1
ChassisIntrusion
Sensor(optional)
1-5
J7 J8
FW82443LX
J11
J1
CHAPTER 2 HARDWARE INSTALLATION
Chapter 2
HARDWARE INSTALLATION
2.1 Central Processing Unit: CPU
The mainboard operates withIntel®Pentium®II processor. The mainboard
uses a CPU Slot called Slot 1 for easy CPU installation and a DIP switch
(SW1) to set the proper speed for the CPU. The CPU should always have a
Heat Sink and a cooling fan attached to prevent overheating.
2-1
CHAPTER 2 HARDWARE INSTALLATION
2.1-1 CPU Installation Procedures
2-2
A. OEM Pentium®II Processor Installation Procedures
There are two kinds of Pentium®II processor that is currently used: the
OEM version and the Boxed version. OEM Pentium®II Processor has no
Heat Sink, Fan and Heat Sink Support, while the Boxed Pentium®II
Processor is provided with Heat Sink w/ fan and Heat Sink Support.
Required Things:
Pentium®IIprocessor - Processor.
*RetentionMechanism(RM) - Plastic Guidethat holdsthe S.E.C. Catridge
in the Slot 1 connector.
*RetentionMechanismAttachMount(RMAM)-Bolt/Bridgeassemblies
inserted up through the bottom of the
motherboard. RM secures to RMAM ( 2
RMAM required per RM ).
*HeatSinkSupportBase(HSSBASE) - Plastic support bar mounted to
the mainboard under the ATX heatsink.
(One leg is always bigger than the other one)
Processor
Lock
Retention
Mechanism
Pentium®II
Processor
Heat Sink
W/Fan
Notch Hole
Heat Sink
Support Base Heat Sink
Support Pin
Heat Sink
Support
Top Bar
CHAPTER 2 HARDWARE INSTALLATION
*HeatSinkSupport Pin (HSSPIN)- Plastic pins inserted through the
HSSBASE to secure it to the mainboard (2
required per Assembly).
*Heat SinkSupport Top Bar(HSSTOP)- Plastic bar that clips onto the
HSSBASE through the fins on the ATX
heatsink.
**Heat Sink w/ fan - Heat Sink that can be attached to thePentium®II
processorwith metalclip.
Note:* Provided by MSI mainboard.
** Provided by Special request.
RM
HSSPIN
HSSTOP
HSSBASE
2-3
RMAM
CHAPTER 2 HARDWARE INSTALLATION
2-4
SLOT1
Retention
Mechanism
êê
Key
êê
Retention
Mechanism
Attach Mount
Notch
Key
Step 1: Insert the Retention Mechanism Attach Mount at the bottom
of the mainboard.
Step 2: Install the Retention Mechanism.
Look for the key on Slot 1, and match it with the Notch Key on the
Retention Mechanism for proper direction. Then, attach the
Retention Mechanism to the Retention Mechanism Attach Mount.
Use a Screwdriver to secure the Retention Mechanism.
Tabla de contenidos
Otros manuales de Placa madre de MSI
MSI
MSI K9A2GM V2 Series Manual de usuario
MSI
MSI 945PL Neo Series Manual de usuario
MSI
MSI K7N420 Pro Manual de usuario
MSI
MSI MAG B660 TOMAHAWK WIFI DDR4 Manual de usuario
MSI
MSI K7T TURBO2 - K7T Turbo 2 Motherboard Manual de usuario
MSI
MSI X470 GAMING PRO Manual de usuario
MSI
MSI K9AGM Series Manual de usuario
MSI
MSI MS-7258 Manual de usuario
MSI
MSI MS-7199 Manual de usuario
MSI
MSI MAG B660 TOMAHAWK WIFI DDR4 Manual de usuario
MSI
MSI G31M Series Manual de usuario
MSI
MSI K9A2 CF Manual de usuario
MSI
MSI PRO Z790-A WIFI Manual de usuario
MSI
MSI P45 NEO3-FR - Motherboard - ATX Manual de usuario
MSI
MSI Z170M MORTAR Manual de usuario
MSI
MSI B450 GAMING PRO CARBON AC Manual de usuario
MSI
MSI H67A-G43 B3 series Manual de usuario
MSI
MSI 865GVM3-V - Motherboard - Micro ATX Manual de usuario
MSI
MSI 880GMA-E53 Series Manual de usuario
MSI
MSI MS-7521 (v2.X) Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
