3
Product Features
Good appearing, corrosion-proof and unbreakable ABS plastic body.
o
Heats water up to 75 C within 20 seconds.
It can be fitted anywhere and everywhere based on your convenience.
No pollution, hence environment-friendly.
Automatic power cut off in case of over-heating.
Auto on or manual reset facility available in some of the models.
Thin body design, streamlined appearance, international fashion.
Instant use, no need to waste your precious time.
Manufactured using advanced techniques and high-precision testing instruments.
The essential components of the product meet the ISI standards.
Ideal to use in houses, beauty salons, hostels, hotels, schools and factories where
there is an instant need of warm/hot water supply (Strictly not for drinking purpose).
Except a qualified technician, do not entertain others to dismantle, repair or change the
water heater or the wire of the device; failing which may result in fire, electricity
leakage, or damage to the product.
Ensure proper 3/20 gauge (2.5 Sq.mm) CTS copper wire, 16 A fuse and power plug.
Ensure all power and voltage related criteria are met for proper working of the water
heater.
Use only 220 Volts AC current and 16 A three pin plug. It is required that this
device be properly grounded. Do not share the plug base with any other electrical
appliances, failing which may cause fire or short circuit.
After completing the installation, make sure that the water overflows from the geyser
before switching on the heater.
Attention during installation
Manual for installation and use
