MQCON Science and Technology H6 Manual de usuario
www.mqcon.com
-
1
-
LCD Display Manual
www.mqcon.com
-
2
-
1．Basic information
Ø3.2 inch color TFT screen
Ø48V/60V/72V power supply
ØNormal operating temperature of the instrument -20～65°C
ØThe instrument case is ABS, black, transparent lens is ordinary
acrylic, high hardness, with protective film
ØSize：
www.mqcon.com
-
3
-
2．LCD display instructions
ØBattery display: 5 segments of power indication, the customer
can select the percentage display and the display of the actual voltage
value
ØSpeed mode: real-time speed RT SPEED, maximum speed MAX
SPEED, average speed AVG SPEED;
speed mode
Power display
Assist gear
brand
TRIP, ODO, WH/KM
RCG / motor temperature/CLK
Power
www.mqcon.com
-
4
-
ØPower display: power real-time display
ØSpeed display：unit Km / h km per hour, MPH miles per hour;
ØAssist gear position: according to the pas mode, 0~9 files can
be displayed.
ØMotor temperature: monitor motor temperature in real time;
ØMileage mode: cumulative mileage ODO, single mileage Trip,
ØWH.KM: the controller power consumption ,wh/km
ØRCG: controller cumulative charge Ah to battery while in regen
mode .
ØClock: Built-in battery, user set the year, month, day, hour,
minute and second.
3．Key Function
ØSwitch function:
Press and hold the M button for about 2 seconds to turn it on and
off.
ØDay/Night Mode Switch:
Up key
M
key
Down key
www.mqcon.com
-
5
-
In the main interface, long press “Up” to enter the switch day/night
mode, the LCD tone will be adjusted to night mode, and the headlights
will be turned on automatically.
Øgear position set：
In the main interface, short press “Up” and “Down” to switch gears.
ØSpeed mode switching
In the main interface, first press the “M key” to enter the speed
display mode switch, then press the “Up” or “Down” button to switch the
display in turn: real-time speed (RT), maximum speed (MAX), average
Speed (AVG).。
ØMileage mode / WH.KM switching
Press “M” again can enter the ODO/Trip/WH.KM switching mode,
which displays: total mileage, single mileage,controller consumption
ØTEMP/ RCG/ CLK switching
Press “M” again can enter the TEMP/RCG/CLK switching mode,which
display: motor temperature, regen Ah, clock
4 . Parameter setting
1). Press and hold the “Up” key + “Down” at the same time to
enter/exit the setting parameters.
www.mqcon.com
-
6
-
2). In the setting interface, the leftmost red cursor arrow is used to
indicate the position of the currently set parameter.
3). Short press the M key, the setting parameter value on the right side
of the current line turns red, enter the parameter modification mode,
short press the up and down keys to change the setting parameters, press
the M key again, exit the current parameter modification mode, enter the
parameter switching/selection mode, short Press the up/down keys to
move the current setting parameters up and down.
4). At the bottom of the setup parameters, there are EXIT, Basic (other
pages have Display, etc.). Under this parameter, short press M to
enter/exit the lower level or current level menu.
Display setting interface
Item Description
System Setting the metric and imperial effects speed display and does not affect
the "wheel" settings in Basic setting menu.
Brightness Backlight brightness setting
Auto off Automatic sleep time, off is not automatic sleep
Battery Main interface, battery display mode, voltage mode and battery
compartment
clock Set the time of the clock, such as year, month, day, hour, minute, and
second
Basis Basic settings, submenu entry
www.mqcon.com
-
7
-
Basic setting interface
Item Description
wheel Motor tire diameter, fixed in inches, independent of other "system"
settings
battery Select according to the battery voltage currently used
start password This menu can't be entered or the button is invalid.
advance Advanced settings, submenu entry
factory Restore factory settings parameters
Advance setting interface
Item Description
assist level PAS mode speed split: There are 3, 5 and 9 modes; please select 5 mode
speed limit
the controller use the computer or app settings instead of the LCD settings.
current limit
power limit
poles in motor Enter the number of magnetic steel sheets. For example, 23 poles motor,
enter 46 here.
magnet disk PAS Speed magnets, the controller ignores the LCD settings
start mode
zero start: the throttle can drive the motor at the zero speed of the motor;
non-zero start: Only when the motor speed is not 0, the throttle can drive
the motor
drive mode 0: only PAS is valid 1: only the throttle is valid; 2: pas and throttle are valid
start sensor after a few laps (set value), the PAS begins to function.
start strength controller currently ignore meter settings
throttle level controller currently ignore meter settings
clockwise controller currently ignore meter settings
throttle 6km controller currently ignore meter settings
key antijam controller currently ignore meter settings
assist forward controller currently ignore meter settings
www.mqcon.com
-
8
-
remark：Due to the upgrade of the company's products, the display
content of the product you get may be different from the manual, but
it will not affect your normal use.
Tabla de contenidos
