MPL MXCS 1548-P1 Manual de usuario

MPL XEON CLASS SERVER 1548-P1

PACKING LIST

1. MXCS 1548-P1 which includes:

1. MXCS Standard Enclosure 66 mm

2. MXCS-1 Ser er Platform with Xeon D-1548 CPU

3. MXCS BMC Module

4. MXCS ETH Module

5. MXCS USB3.0 Module

6. MXCS Serial Module

7. SerifV-1

8. UNIGET-1

9. DDR4 memory (if ordered)

10. Hard dri e(s) (if ordered)

2. MXCS Power Connector Kit

3. Test Certificate

4. Burn-In test protocol

High-Tech • Made in Switzerland

MXCS 1548-P1

Operators Qu ck Reference

1 OUTLINE AND DIMENSIONS

F gure 1: MXCS 1548-P1 Dimensions

High-Tech • Made in Switzerland

MXCS 1548-P1

Operators Qu ck Reference

TABLE OF CONTENTS
OUTLINE AND DIMENSIONS.........................................................................................2
INTRODUCTION.............................................................................................................5
1 ABOUT THIS MANUAL......................................................................................................... 5
2 SAFETY PRECAUTIONS AND HANDLING..........................................................................5
3 ELECTROSTATIC DISCHARGE (ESD) PROTECTION........................................................5
4 EQUIPMENT SAFETY...........................................................................................................5
5 MANUAL REVISION HISTORY.............................................................................................6
6 RELATED DOCUMENTATION...............................................................................................6
INTERFACE OVERVIEW................................................................................................7
OPERATING CONDITIONS............................................................................................8
1 POWER INPUT...................................................................................................................... 8
2 POWER DISSIPATION...........................................................................................................8
3 ENVIRONMENTAL CONDITIONS.........................................................................................8
INTERFACE DESCRIPTION...........................................................................................9
1 PUSH BUTTONS AND INDICATOR LEDS............................................................................9
1.1 POWER & RESET BUTTON..........................................................................................9
1.1.1 Power Button...........................................................................................................................9
1.1.2 Reset Button........................................................................................................................... 9
1.2 SYSTEM INDICATOR LED'S.........................................................................................9
1.2.1 Input Power............................................................................................................................. 9
1.2.2 Power...................................................................................................................................... 9
1.2.3 Reset.......................................................................................................................................9
1.3 ETHERNET INDICATOR LED'S.....................................................................................9
1.3.1 Acti ity..................................................................................................................................... 9
1.3.2 Speed...................................................................................................................................... 9
2 CONNECTOR FRONT......................................................................................................... 10
2.1 POWER INPUT............................................................................................................ 10
2.2 RS232 SERIAL PORT.................................................................................................. 10
2.3 USB 3.0 PORT............................................................................................................. 10
2.4 VGA PORT................................................................................................................... 11
2.5 IPMI MANAGEMENT PORT.........................................................................................11
2.6 ETHERNET PORTS.....................................................................................................11
2.7 SFP+ CAGE & SOCKET.............................................................................................. 12
COPYRIGHT.................................................................................................................16
DISCLAIMER................................................................................................................16
TRADEMARKS.............................................................................................................16
SUPPORT..................................................................................................................... 16
1 FAQs.................................................................................................................................... 16
2 SERIAL NUMBER AND REVISION.....................................................................................16
3 CONTACTING MPL AG....................................................................................................... 16
©2017 by MPL AG 3 MEH-10180-501 Re . A
High-Tech •  Made in Switzerland
MXCS 1548-P1
Operators Qu ck Reference

TABLE OF FIGURES

Figure 1: MXCS 1548-P1 Dimensions................................................................................................................... 2

Figure 2: MXCS 1548-P1 Connector Front............................................................................................................ 7

Figure 3: Power Input........................................................................................................................................... 10

Figure 4: RS232 Serial Port................................................................................................................................. 10

Figure 5: USB 3.0 Port......................................................................................................................................... 10

Figure 6: VGA Port............................................................................................................................................... 11

Figure 7: IPMI Management Port......................................................................................................................... 11

Figure 8: Ethernet Ports....................................................................................................................................... 11

Figure 9: SFP+ Cage & Socket............................................................................................................................ 12

Figure 10: MXCS 1548-P1 Label......................................................................................................................... 16

High-Tech • Made in Switzerland

MXCS 1548-P1

Operators Qu ck Reference

2 INTRODUCTION

2.1 ABOUT THIS MANUAL

This Reference, the MXCS Technical Reference Manual and the MXCS BIOS User Manual pro ide information

for handling and configuring the MXCS 1548-P1. Be sure to read these manuals before attempting to use the

MXCS, and keep the manuals close at hand for reference during operation.

This reference is written for advanced techn cal personnel responsible for integrating the MXCS 1548-P1 into

their systems.

While the Tech Ref Manual and the BIOS User Manual contain deeper information about the MXCS mainboard,

contains this Reference an o er iew about the whole ser er unit, including the assembled sub modules.

2.2 SAFETY PRECAUTIONS AND HANDLING

For personal safety and safe operation of the MXCS 1548-P1, follow all safety procedures described here and

in other sections of the manual.

●Remo e power from the system before installing (or remo ing) the MXCS 1548-P1, to pre ent the possibility

of personal injury (electrical shock) and / or damage to the product.

●Handle the product carefully; i.e. dropping or mishandling the MXCS 1548-P1 can cause damage to

assemblies and components.

●Do not expose the equipment to moisture.

2.3 ELECTROSTATIC DISCHARGE (ESD) PROTECTION

Various electrical components within the product are sensiti e to static and electrostatic discharge. E en a small

static discharge can be sufficient to destroy or degrade a component's operation!

Do not touch any electronic components in an open MXCS 1548-P1 housing.

Handle and mount DIMM modules, PCIe and PCIe/104 cards, mSATA or other add-on modules and also cables

to internal connectors only in an ESD protected en ironment.

2.4 EQUIPMENT SAFETY

Great care is taken by MPL AG that all its products are thoroughly and rigorously tested before lea ing the

factory to ensure that they are fully operational and conform to specification. Howe er, no matter how reliable a

product, there is always the remote possibility that a defect may occur.

The occurrence of a defect on this de ice may, under certain conditions, cause a defect to occur in adjoining

and/or connected equipment. It is the customers responsibility to protect such equipment when installing this

de ice. MPL AG accepts no responsibility whatsoe er for such defects, howe er caused.

High-Tech • Made in Switzerland

MXCS 1548-P1

Operators Qu ck Reference

2.5 MANUAL REVISION HISTORY

Manual

Rev s on

Date Descr pt on

A 10.10.17 •Initial release of this document

2.6 RELATED DOCUMENTATION

Please note, the MXCS Operators Quick Reference contains general information about the whole ser er unit,

including assembled sub modules and used housings. But the MXCS Technical Reference Manual and the

BIOS User Manual contain deeper information about the MXCS mainboard and its function.

The following documents are related to this reference. For detailed Information about a specific MXCS setting or

feature, please see this additional manuals.

Reference Descr pt on Ava lable from

[1] MXCS Technical Reference Manual MEH-10180-001 MPL AG: www.mpl.ch/t5010.html

[1] MXCS BIOS User Manual MPL AG: www.mpl.ch/t5010.html

[2] UNIGET User Manual MPL AG: www.mpl.ch/t2870.html

[3] SerifV User Manual MPL AG: www.mpl.ch/t2b30.html

High-Tech • Made in Switzerland

MXCS 1548-P1

Operators Qu ck Reference

3 INTERFACE OVERVIEW

F gure 2: MXCS 1548-P1 Connector Front

High-Tech • Made in Switzerland

MXCS 1548-P1

Operators Qu ck Reference

SFP+

USB Ports

RS232 Serial Ports

Power Input

IPMI Management Port

VGA Port

PWR & RST LED

PWR & RST Button

Ethernet Ports

Input Power LED

4 OPERATING CONDITIONS

4.1 POWER INPUT

Item Spec f cat ons

Input Voltage •24 V +50 %/-20 %

Inrush Current The inrush current depends on parameters that are not MXCS specific, like:

•Power supply internal resistance

•Power supply oltage rise time and oltage alue

•Power cable impedance

Power Up Current •2 A @ 24 V

Protection Circuits •ESD and EMC protected power input

•-36 VDC re erse polarity protection

•150 V load dump protection

4.2 POWER DISSIPATION

The power consumption changes in a wide range according to the needed CPU, memory, graphics and

interfaces usage. Please find some reference alues in the table below:

Power State MXCS 1548-P1

ACPI Soft Off, BMC fully booted 7 W

BIOS Setup Screen 42 W

Win7 Desktop Screen w/o CPU Load 26 W

Win7 w/ Prime95 65 W

Win7 w/ SiSoft Sandra Burn-In Tool 67 W

4.3 ENVIRONMENTAL CONDITIONS

Item Spec f cat ons

Storage Temperature •-45 °C to +85 °C (-49 °F to +185 °F)

Operating Temperature •Depends on cooling solution and air flow.

Relati e Humidity •5% to 95%, non-condensing

Shock and Vibration •TBD

High-Tech • Made in Switzerland

MXCS 1548-P1

Operators Qu ck Reference

5 INTERFACE DESCRIPTION

5.1 PUSH BUTTONS AND INDICATOR LEDS

5.1.1 POWER & RESET BUTTON

5.1.1.1 Power Button

When pressed shortly the Power Button has the following functions:

•If the system is in standby state this will start up the MXCS 1548-P1.

•If the system is running, a shut down e ent is triggered. Be aware, that the handling of this e ent depends on

the operating system. It may e en be ignored.

A long acti ation (typically more than four seconds) will immediately switch off the power supply.

5.1.1.2 Reset Button

Pressing the Reset Button will immediately cause a system wide reset.

5.1.2 SYSTEM INDICATOR LED'S

5.1.2.1 Input Power

The Input Power LED lights green if the input power oltage is abo e its under oltage le el.

5.1.2.2 Power

The Power LED lights green when the system is running.

While in standby state it lights orange.

Other states, particularly failure states, may be signaled by the Power LED differently. For details please refer to

the respecti e technical documentation.

5.1.2.3 Reset

A system wide reset is signaled when this LED lights red. During normal system operation this LED is unlit.

5.1.3 ETHERNET INDICATOR LED'S

This LEDs are directly placed at the RJ45 connectors.

5.1.3.1 Act v ty

If no link can be detected this LED is permanently off. It lights green if a link is established. Green blinking

signals data acti ity.

5.1.3.2 Speed

The link speed is 1 Gbit/s when the LED lights orange, 100 Mbit/s when it lights green and 10 Mbit/s when the

Speed LED is unlit and the Acti ity LED is on.

High-Tech • Made in Switzerland

MXCS 1548-P1

Operators Qu ck Reference

5.2 CONNECTORS

5.2.1 POWER INPUT

Connector Type: Conec, 302W2CSXX56N40X.

Counterpart: Conec, 302W2CP with solder contacts 132C10029X and 131C10029X.

Pinout:

P n

S gnal

Descr pt on

P n Ass gnment

A1 VIN_CON Input Power + (24 VNOMINAL)

A2 GND_CON Input Power – (0 V), connected to Case EARTH

F gure 3: Power Input

5.2.2 RS232 SERIAL PORTS

Connector Type: Standard 9 pin Sub-D male connector.

Counterpart: Standard 9 pin Sub-D female connector.

Pinout:

P n

S gnal

Descr pt on

P n Ass gnment

1 DCD Carrier detect

2 RXDn Recei e data

3 TXDn Transmit data

4 DTR Data terminal ready

5 GND Ground

6 DSR Data set ready

7 RTS Request to send

8 CTS Clear to send

9 RI Ring indicator

1 5

F gure 4: RS232 Serial Port

5.2.3 USB 3.0 PORTS

Connector Type: Standard Type A USB 3.0 socket.

Counterpart: Standard Type A USB 3.0 plug.

Pinout:

P n

S gnal

Descr pt on

P n Ass gnment

1 VCC Cable Power +5 V

2 P- Balanced Data Line -

3 P+ Balanced Data Line +

4 GND Cable Ground

5 USB30_RX- USB3.0 Recei e -

6 USB30_RX+ USB3.0 Recei e +

7 GND Cable Ground

8 USB30_TX- USB3.0 Transmit -

9 USB30_TX+ USB3.0 Transmit +

1 4

F gure 5: USB 3.0 Port

High-Tech • Made in Switzerland

MXCS 1548-P1

Operators Qu ck Reference

Tabla de contenidos

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario