MPL PIP20 Manual del producto

PACKED INDUSTRIAL PC WITH CORE (2) DUO PROCESSOR

The PIP is a low power, highly integrated rugged industrial PC with a specially designed aluminum housing.

This allows the PIP to operate in a standard or also in a harsh environment without fan or ventilation holes. The

design integrates standard connectors for easy connection. It can be used for any PC application where a

complete solution is needed. The PIP is 100% PC AT compatible, and can easily be mounted on a 35 mm DIN

rail.

The PIP housing offers space for a 2.5 inch hard disk and a CD-ROM drive. With the integrated PC 104(- PLUS)

interface and the PCI-Express Mini Card Slot there are flexible expansion possibilities available. Fully bootable

FLASH disks are supported for projects where hard disks cannot be used. Particular precautions have been

taken that the EMC for the entire system is within the CE and FCC limits.

All these features make the PIP the ideal solution for the industry wherever a flexible, rugged and durable

complete Industrial PC is needed.

Features:

●Core Duo L2400 1.66 GHz with 2 MByte Level2

Cache (PIP20)

●Or Core 2 Duo L7400 1.5 GHz with 4 MByte Level2

Cache (PIP22)

●Intel Mobile Technology components

●Dual Channel DDR2-667 memory

●Up to 3 GB memory with 1 GB soldered down

●Suspend to Disk (S4) support

●3D graphics with up to 224 MByte shared memory

●2 Ethernet ports with up to 10M 100M 1G Bit s

●Up to 2 FireWire 1394b ports (800 Mbit s)

●Up to 6 USB 2.0 ports (480 MBit s)

●2 SATA-I ports (150 MByte s)

●1 Ultra DMA-100 IDE port

●1 MByte Firmware Hub

●Parallel port (SPP, EPP, ECP) with external floppy

disk capability

●2 serial ports with RS232 interface

●Four full featured PC 104(-PLUS) slots without ISA

Master and ISA DMA capability

●Watchdog timer with hardware reset capability

●2 serial ports with RS232 or RS485 interface

(optional)

●UPS (optional)

●Galvanically isolated power input (optional)

●AC’97 Codec (optional)

●CAN interface (optional)

●RoHS compliant

2010 by MPL AG 1 MEH-10126-201 Rev. D

High-Tech • Made in Switzerland

PIP20 / PIP22

Tec nical Reference Manual

TABLE OF CONTENTS

1 INTRODUCTION.............................................................................................................7

1.1 ABOUT THIS MANUAL.........................................................................................................7

1.2 SAFETY PRECAUTIONS AND HANDLING..........................................................................7

1.3 ELECTROSTATIC DISCHARGE (ESD) PROTECTION........................................................7

1.4 EQUIPMENT SAFETY...........................................................................................................7

1.5 MANUAL REVISIONS............................................................................................................8

1.5.1 RELATED PRODUCTS.................................................................................................. 8

1.5.2 REVISION HISTORY.....................................................................................................8

1.6 RELATED DOCUMENTATION..............................................................................................9

1.7 STANDARDS COMPLIANCE.............................................................................................. 10

1.7.1 EMC............................................................................................................................. 10

1.7.2 Environmental............................................................................................................... 10

1.7.3 Safety........................................................................................................................... 10

1.7.4 Type Approval.............................................................................................................. 10

1.8 ORDERING INFORMATION................................................................................................ 11

2 SPECIFICATION...........................................................................................................12

2.1 ELECTRICAL....................................................................................................................... 12

2.1.1 PROCESSOR............................................................................................................... 12

2.1.2 CHIPSET...................................................................................................................... 12

2.1.3 BIOS ROM.................................................................................................................... 12

2.1.4 MEMORY..................................................................................................................... 12

2.1.5 RTC.............................................................................................................................. 12

2.1.6 PC 104-PLUS INTERFACE..........................................................................................12

2.1.7 GRAPHICS................................................................................................................... 12

2.1.8 USB.............................................................................................................................. 12

2.1.9 SERIAL PORTS........................................................................................................... 12

2.1.10 RS485 RS422 INTERFACE MODULES (OPTIONAL)...............................................13

2.1.11 PARALLEL PORT......................................................................................................13

2.1.12 IDE PORTS................................................................................................................ 13

2.1.13 SATA-I PORTS........................................................................................................... 13

2.1.14 FLOPPY DISK............................................................................................................ 13

2.1.15 FIREWIRE 1394B....................................................................................................... 13

2.1.16 ETHERNET................................................................................................................ 13

2.1.17 KEYBOARD MOUSE................................................................................................13

2.1.18 AC’97 AUDIO CONTROLLER....................................................................................13

2.1.19 INDICATORS............................................................................................................. 13

2.1.20 RESET BUTTON, POWER BUTTON.........................................................................14

2.1.21 HARDWARE WATCHDOG TIMER............................................................................14

2.1.22 TEMPERATURE SENSORS.....................................................................................14

2.1.23 VOLTAGE SENSORS................................................................................................14

2.1.24 SPECIALTIES............................................................................................................ 14

2.2 PHYSICAL........................................................................................................................... 15

2.2.1 HOUSING..................................................................................................................... 15

2.2.2 FORM FACTOR........................................................................................................... 15

2.2.3 WEIGHT....................................................................................................................... 15

2.3 POWER................................................................................................................................ 15

2.3.1 POWER SUPPLY.........................................................................................................15

2.3.2 FUSE............................................................................................................................ 15

2.3.3 RTC BATTERY............................................................................................................. 15

2010 by MPL AG 2 MEH-10126-201 Rev. D

High-Tech • Made in Switzerland

PIP20 / PIP22

Tec nical Reference Manual

2.3.4 INPUT POWER............................................................................................................ 15

2.4 ENVIRONMENT................................................................................................................... 15

2.4.1 TEMPERATURE RANGE.............................................................................................15

2.4.2 RELATIVE HUMIDITY..................................................................................................15

3 HARDWARE REFERENCE..........................................................................................16

3.1 HOUSING DIMENSIONS.....................................................................................................16

3.1.1 TOP VIEW.................................................................................................................... 16

3.1.2 BOTTOM VIEW............................................................................................................ 17

3.1.3 SIDE VIEW 1................................................................................................................ 18

3.1.4 SIDE VIEW 2................................................................................................................ 19

3.1.5 SIDE VIEW 3................................................................................................................ 20

3.1.6 SIDE VIEW 4................................................................................................................ 20

3.2 OPENING THE CASE.......................................................................................................... 21

3.3 DIMENSIONS AND PLACEMENT.......................................................................................22

3.3.1 DIMENSIONS OF THE PCB........................................................................................22

3.3.2 PARTS LOCATION......................................................................................................23

3.4 SWITCH SETTINGS............................................................................................................. 24

3.4.1 DIP SWITCH 1 (S1) – PERIPHERAL SETTINGS........................................................24

3.4.2 DIP SWITCH 2 (S2) – ON BOARD LVDS PORT (LCD PANEL) SETTINGS...............25

3.4.3 DIP SWITCH 3 (S3) – PC 104-PLUS IO-VOLTAGE SETTINGS..................................25

3.4.4 DIP SWITCH 4 (S4)......................................................................................................25

3.5 CONNECTORS.................................................................................................................... 26

3.5.1 EXTERNAL CONNECTORS........................................................................................26

3.5.1.1 Parallel Port Connector (J3)..................................................................................................26

3.5.1.2 Serial-1 (J49) And Serial-3 (J37) Connector.........................................................................27

3.5.1.3 Serial-2 (J22) And Serial-4 (J12) Connector.........................................................................27

3.5.1.4 External Power Connector (J2).............................................................................................28

3.5.1.5 PS 2 Keyboard And Mouse Connector (J8)..........................................................................30

3.5.1.6 FireWire 1394b Connector (J11)...........................................................................................30

3.5.1.7 Dual USB Connectors (J40, J46)..........................................................................................30

3.5.1.8 DVI-I Connector (J20)...........................................................................................................31

3.5.1.9 10M 100M 1G Bit s Ethernet Connectors (LAN1: J52, LAN2: J33)......................................31

3.5.2 INTERNAL CONNECTORS.........................................................................................32

3.5.2.1 IDE Connector (J41).............................................................................................................32

3.5.2.2 SATA Signal Connectors (J56, J57).....................................................................................32

3.5.2.3 SATA Power Connector (J54)...............................................................................................32

3.5.2.4 LED Panel Connector 1 (J38)...............................................................................................33

3.5.2.5 LED Panel Connector 2 (J39)...............................................................................................33

3.5.2.6 sDVO Expansion Module Connector (J19)...........................................................................34

3.5.2.7 LVDS Connector (J27)..........................................................................................................35

3.5.2.8 Touch Panel Connector (J21)...............................................................................................35

3.5.2.9 Backlight Inverter Connector (J28)........................................................................................36

3.5.2.10 Panel Dimming Connector (J24).........................................................................................36

3.5.2.11 Internal Power Connector 1 (J4).........................................................................................36

3.5.2.12 Internal Power Connector 2 (J6).........................................................................................37

3.5.2.13 Power Input Extension Connector (J5)...............................................................................37

3.5.2.14 AC’97 Connector (J47)........................................................................................................37

3.5.2.15 USB2.0 Header Connector (J43)........................................................................................37

3.5.2.16 Firewire Header Connector (J14)........................................................................................38

3.5.2.17 Reset & Power Button Connector (J7)................................................................................38

3.5.2.18 CAN Expansion Connector (J35)........................................................................................38

3.5.2.19 PC 104 Interface Connector (J29 J36)................................................................................39

3.5.2.20 PC 104-PLUS Interface Connector (J53)............................................................................40

3.5.2.21 SMB Connector (J48)..........................................................................................................40

3.5.2.22 IPT700 Connector (J14)......................................................................................................40

3.5.2.23 JTAG Port Connector (J50).................................................................................................40

3.5.2.24 LPC Bus Expansion Connector (J42).................................................................................40

3.6 MODULE SOCKETS............................................................................................................ 41

2010 by MPL AG 3 MEH-10126-201 Rev. D

High-Tech • Made in Switzerland

PIP20 / PIP22

Tec nical Reference Manual

3.6.1 MEMORY MODULE.....................................................................................................41

3.6.1.1 Electrical And Mechanical Requirements..............................................................................41

3.6.1.2 Mounting The Memory Module.............................................................................................41

3.6.2 RS232 AND RS485 RS422 INTERFACE MODULES................................................41

3.6.3 PC 104(-PLUS) MODULES..........................................................................................41

3.6.4 PCI-EXPRESS MINI CARD MODULES.......................................................................41

3.7 SYSTEM-VOLTAGES SUPPLIED BY THE PIP..................................................................42

3.7.1 -12 V, -5 V AND 12 V...................................................................................................42

3.7.2 3.3 V, 5 V and 5 V Standby..........................................................................................42

4 THEORY OF OPERATION............................................................................................43

4.1 BLOCK DIAGRAM............................................................................................................... 43

4.2 PC/AT FUNCTIONALITY.....................................................................................................44

4.3 STATUS INDICATORS........................................................................................................ 44

4.3.1 POWER INDICATOR LED...........................................................................................44

4.3.2 RESET INDICATOR LED.............................................................................................44

4.3.3 HDD INDICATOR LED.................................................................................................44

4.3.4 IEEE1394b INDICATOR LED.......................................................................................44

4.3.5 LAN 1 Activity INDICATOR LED...................................................................................44

4.3.6 LAN 1 Speed INDICATOR LED....................................................................................44

4.3.7 USER1, USER2 INDICATOR LEDS.............................................................................44

4.3.8 Wireless WAN INDICATOR LED..................................................................................44

4.3.9 Wireless LAN INDICATOR LED...................................................................................44

4.3.10 Wireless PAN INDICATOR LED.................................................................................44

4.3.11 LAN 2 Activity INDICATOR LED.................................................................................45

4.3.12 LAN 2 Speed INDICATOR LED..................................................................................45

4.4 BATTERY CIRCUIT............................................................................................................. 45

4.5 HARDWARE WATCHDOG.................................................................................................. 45

4.6 RS485 / RS422 INTERFACES.............................................................................................45

4.7 TEMPERATURE SENSORS................................................................................................ 45

4.8 VOLTAGE SENSORS.......................................................................................................... 46

5 SOFTWARE..................................................................................................................47

5.1 PIP EXTENSION REGISTER SET.......................................................................................47

5.1.1 OVERVIEW.................................................................................................................. 47

5.1.2 CAN RESOURCE REGISTER.....................................................................................48

5.1.3 CAN CONTROL REGISTER........................................................................................49

5.1.4 USER LED CONTROL REGISTER..............................................................................50

5.1.5 PIP STATUS REGISTER 1..........................................................................................50

5.1.6 PIP STATUS REGISTER 2..........................................................................................51

5.1.7 PARALLEL PORT FLOPPY REGISTER......................................................................51

5.1.8 PIP FAMILY ID REGISTER..........................................................................................51

5.1.9 PIP20 VARIANT REGISTER........................................................................................52

5.1.10 PLD CODE REVISION REGISTER............................................................................52

5.2 BIOS..................................................................................................................................... 53

5.3 DEVICE DRIVERS............................................................................................................... 53

5.4 TOOLS................................................................................................................................. 53

6 COPYRIGHT................................................................................................................. 56

7 DISCLAIMER................................................................................................................56

8 TRADEMARKS.............................................................................................................56

2010 by MPL AG 4 MEH-10126-201 Rev. D

High-Tech • Made in Switzerland

PIP20 / PIP22

Tec nical Reference Manual

9 SUPPORT.....................................................................................................................56

9.1 FAQs.................................................................................................................................... 56

9.2 SERIAL NUMBER AND REVISION.....................................................................................56

9.3 CONTACT MPL AG............................................................................................................. 56

2010 by MPL AG 5 MEH-10126-201 Rev. D

High-Tech • Made in Switzerland

PIP20 / PIP22

Tec nical Reference Manual

TABLE OF FIGURES

Figure 1: PIP2x Housing Top View...................................................................................................................... 16

Figure 2: PIP2x Housing Bottom View................................................................................................................. 17

Figure 3: PIP2x Housing Side View 1.................................................................................................................. 18

Figure 4: PIP2x Housing Side View 2.................................................................................................................. 19

Figure 5: PIP2x Housing Side View 3.................................................................................................................. 20

Figure 6: PIP2x Housing Side View 4.................................................................................................................. 20

Figure 7: Removing The 6 Screws....................................................................................................................... 21

Figure 8: Lift Up The Cover.................................................................................................................................. 21

Figure 9: Locations Of The Standoff And Mounting Holes...................................................................................22

Figure 10: Parts Location..................................................................................................................................... 23

Figure 11: DIP Switch 1....................................................................................................................................... 24

Figure 12: DIP Switch 2....................................................................................................................................... 25

Figure 13: DIP Switch 3....................................................................................................................................... 25

Figure 14: DIP Switch 4....................................................................................................................................... 25

Figure 15: Parallel Port Connector (DSUB 25 Female) (Connector: Compona, 329 156-6)................................26

Figure 16: Serial Port Connector (DSUB 9 Male) (Connector: Compona, 329 151-6).........................................27

Figure 17: Serial Port Connector (DSUB 9 Male) (Connector: Compona, 329 151-6).........................................27

Figure 18: Power Connector (Connector: Phoenix Contact AG, MC1,5 4GF-3,81).............................................28

Figure 19: External Reset - And Power Button....................................................................................................28

Figure 20: Connections Between All The PIP Power Connectors........................................................................29

Figure 21: PS 2 Keyboard & Mouse Connector (Connector: Compona, 129108-7).............................................30

Figure 22: FireWire 1394b Bilingual Connector (Connector: Molex, 45241-0001)...............................................30

Figure 23: Dual USB (Type A) Connector (Connector: FCI, 72309-0010B).........................................................30

Figure 24: DVI-I Connector (Connector: Samtec, DVI-29-AW-FT).......................................................................31

Figure 25: RJ45 Connector (Connector: Bel Fuse 0826-1K1T-23-F)...................................................................31

Figure 26: IDE Connector (Connector: Samtec, TMM122-01-LDSM)..................................................................32

Figure 27: SATA Connector (Connector: Molex, 67491-0010)............................................................................32

Figure 28: Power Connector For SATA Devices (Connector: Samtec, IPL1-105-02-S-D)...................................32

Figure 29: LED Panel Connector 1 (Connector: Samtec, EHF-108-01-L-D-SM-P)..............................................33

Figure 30: LED Panel Connector 2 (Connector: Samtec, EHF-110-01-L-D-SM-P)..............................................33

Figure 31: DVO Expansion Module Connector (Connector: Samtec, RSM-125-02-L-D).....................................34

Figure 32: LVDS Panel Connector (Connector: Molex, 501190-3017)................................................................35

Figure 33: Touch Panel Connector (Connector: Samtec, IPL1-105-02-S-D).......................................................35

Figure 34: LVDS Panel Connector (Connector: Molex, 501190-2017)................................................................36

Figure 35: Panel Dimming Connector (Connector: Samtec, IPL1-102-02-S-D)...................................................36

Figure 36: Internal Power Connector (Connector: Samtec, IPL1-105-02-S-D)....................................................36

Figure 37: Internal Power Connector 2 (Connector: Samtec, IPL1-105-02-S-D).................................................37

Figure 38: Power Input Extension Connector (Connector: Molex, 39-28-1043)...................................................37

Figure 39: AC’97 Codec Connector (Connector: Samtec, EHT-105-01-S-D-SMLC)...........................................37

Figure 40: USB2.0 Header Connector (Connector: Samtec, EHT-105-01-S-D-SMLC).......................................37

Figure 41: Firewire Header Connector (Connector: Samtec, EHT-105-01-S-D-SMLC).......................................38

Figure 42: Reset & Power Button Connector (Connector: Samtec, IPL1-102-02-S-D)........................................38

Figure 43: CAN Expansion Connector (Connector: Samtec, TMM113-01-LD)....................................................38

Figure 44: PC 104 Connector (Connector: Samtec, ESW-120-12GD ESW-132-12GD)....................................39

Figure 45: PC 104+ Connector (Connector: Samtec, ESQT-130-03-MQ-368)....................................................40

Figure 46: SM Bus Connector (Connector: Samtec, EHT-105-01-S-D-SMLC)....................................................40

Figure 47: Mounting The Memory Module........................................................................................................... 41

Figure 48: Complete PIP Block Diagram.............................................................................................................43

Figure 49: Removing the 6 screws....................................................................................................................... 45

Figure 50: PIP Label............................................................................................................................................ 56

2010 by MPL AG 6 MEH-10126-201 Rev. D

High-Tech • Made in Switzerland

PIP20 / PIP22

Tec nical Reference Manual

1 INTRODUCTION

1.1 ABOUT THIS MANUAL

This manual and the appropriate PIP BIOS User Manual provides all the information necessary to handle and

configure the PIP.

This manual is written for advanced tec nical personnel responsible for integrating the PIP into their systems.

1.2 SAFETY PRECAUTIONS AND HANDLING

For personal safety and safe operation of the PIP, follow all safety procedures described here and in other

sections of the manual.

●Remove power from the system before installing (or removing) the PIP, to prevent the possibility of personal

injury (electrical shock) and or damage to the product.

●Handle the product carefully; i.e. dropping or mishandling the PIP can cause damage to assemblies and

components.

●Do not expose the equipment to moisture.

1.3 ELECTROSTATIC DISCHARGE (ESD) PROTECTION

Various electrical components within the product are sensitive to static and electrostatic discharge (ESD). Even

a small static discharge can be sufficient to destroy or degrade a component's operation!

With an open housing, do not touch any electronic components. Handle or touch only the unit chassis.

1.4 EQUIPMENT SAFETY

Great care is taken by MPL AG that all its products are thoroughly and rigorously tested before leaving the

factory to ensure that they are fully operational and conform to specification. However, no matter how reliable a

product, there is always the remote possibility that a defect may occur. The occurrence of a defect on this

device may, under certain conditions, cause a defect to occur in adjoining and or connected equipment. It is

your responsibility to protect such equipment when installing this device. MPL accepts no responsibility

whatsoever for such defects, however caused.

2010 by MPL AG 7 MEH-10126-201 Rev. D

High-Tech • Made in Switzerland

PIP20 / PIP22

Tec nical Reference Manual

1.5 MANUAL REVISIONS

1.5.1 RELATED PRODUCTS

Revision Related To

A•PIP20-1

B•PIP20 and all its custom variants

•PIP22 and all its custom variants

1.5.2 REVISION HISTORY

Revision Date Description

A 2008-03-18 - Initial release of this document.

B 2008-06-19 - PIP22 added to this manual.

- Minor placement changes done in chapter 3.3 DIMENSIONS AND PLACEMENT.

- Some typos corrected.

C 2009-11-13 - Some typos corrected.

- Higher resolution added in chapter 2.1.7.

- Firewire-Kit1 mentioned in chapter 3.5.2.16.

- Connector part name changed in chapter 3.5.2.19 and 3.5.2.20.

- 5V Standby information added in chapter 3.7.2.

D 2010-04-19 -Some power usage examples added in chapter 2.3.4.

-The whole chapter 3.1 HOUSING DIMENSIONS added.

2010 by MPL AG 8 MEH-10126-201 Rev. D

High-Tech • Made in Switzerland

PIP20 / PIP22

Tec nical Reference Manual

1.6 RELATED DOCUMENTATION

The following documents are related to this manual. For detailed Information about a specific PIP setting or

feature please refer to this additional manuals or data sheets.

Reference Description Available from

[1] PIP20 BIOS User Manual MPL AG: www.mpl.ch t2400.html

[2] PIP20 User Manual MPL AG: www.mpl.ch t2400.html

[3] SERIF User Manual MPL AG: www.mpl.ch t2400.html

[4] PC 104-PLUS Specification, Rev. 2.2 PC 104 Embedded Consortium: www.pc104.org

[5] PC 104 Specification, V2.5 PC 104 Embedded Consortium: www.pc104.org

[6] PCI Local Bus Specification Rev. 2.3 PCI-SIG: www.pcisig.com

[7] PCI Express Base Specification 1.0a PCI-SIG: www.pcisig.com

[8] PCI Express Mini Card Electromechanical

Specification 1.1

PCI-SIG: www.pcisig.com

[9] IEEE P996 draft standard (D2.02) IEEE Standards Association: standards.ieee.org

[10] SCH301x Super-IO Data sheet SMSC: www.smsc.com

[11] ICH7 I O Controller Hub Data sheet Intel: www.intel.com

[12] 82573L GbE Controller Data sheet Intel: www.intel.com

[13] TSB82AA2 1394b Controller Data sheet Texas Instruments: www.ti.com

[14] TSB81BA3 Three-Port Cable Transceiver Arbiter

Data sheet

Texas Instruments: www.ti.com

[15] 945GM Memory Controller Hub Data sheet Intel: www.intel.com

[16] SiI1362 DVI Transmitter Data sheet Silicon Image: www.siimage.com

[17] Core Duo and Core Solo on 65nm Process Data

sheet

Intel: www.intel.com

[18] Core 2 Duo Mobile Processor Data sheet Intel: www.intel.com

[19]

2010 by MPL AG 9 MEH-10126-201 Rev. D

High-Tech • Made in Switzerland

PIP20 / PIP22

Tec nical Reference Manual

1.7 STANDARDS COMPLIANCE

The PIP20 PIP22 is designed to meet or exceed the most common industry and military standards. Particular

references are:

1.7.1 EMC

•EN 55022 Class B (Information technology equipment - Radio disturbance characteristics - Limits and

methods of measurement)

•EN 55024 (Information technology equipment - Immunity characteristics - Limits and methods of

measurement)

•EN 61000-4-1 (Electromagnetic compatibility (EMC) -- Part 4-1: Testing and measurement techniques -

Overview of IEC 61000-4 series)

•EN 61000-4-2 Level 3, Criterion B (Electromagnetic compatibility (EMC) -- Part 4-2: Testing and

measurement techniques - Electrostatic discharge immunity test)

•EN 61000-4-3 Level 3, Criterion A (Electromagnetic compatibility (EMC) -- Part 4-3: Testing and

measurement techniques - Radiated, radio-frequency, electromagnetic field immunity

test)

•EN 61000-4-4 Class 3 (Electromagnetic compatibility (EMC) -- Part 4-4: Testing and measurement

techniques - Electrical fast transient burst immunity test)

•EN 61000-4-5 Class 3 (Electromagnetic compatibility (EMC) -- Part 4-5: Testing and measurement

techniques - Surge immunity test)

•EN 61000-4-6 Class 3 (Electromagnetic compatibility (EMC) -- Part 4-6: Testing and measurement

techniques - Immunity to conducted disturbances, induced by radio-frequency fields)

•EN 61000-6-1 (Electromagnetic compatibility (EMC) -- Part 6-1: Generic standards - Immunity for

residential, commercial and light-industrial environments)

•EN 61000-6-2 (Electromagnetic compatibility (EMC) -- Part 6-2: Generic standards - Immunity for industrial

environments)

•EN 61000-6-3 (Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards - Emission standard for

residential, commercial and light-industrial environments)

•EN 61000-6-4 (Electromagnetic compatibility (EMC) -- Part 6-4: Generic standards - Emission standard for

industrial environments)

•MIL-STD-461E (REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE

CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT)

1.7.2 Environmental

•EN 50155 (Railway applications - Electronic equipment used on rolling stock)

•MIL-STD-810-F (ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS)

1.7.3 Safety

•EN 60601-1 (Medical electrical equipment -- Part 1: General requirements for safety)

•EN 60950 Class III (Information technology equipment - Safety)

1.7.4 Type Approval

•EN 60945 Protected Equipment (Maritime navigation and radiocommunication equipment and systems -

General requirements - Methods of testing and required test results)

•IACS E10 (Test Specification for Type Approval)

2010 by MPL AG 10 MEH-10126-201 Rev. D

High-Tech • Made in Switzerland

PIP20 / PIP22

Tec nical Reference Manual

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de PC industrial de MPL

MPL

MPL PIP4x Manual de usuario

MPL

MPL PIP8 Manual de usuario

MPL

MPL PIP19 Manual del producto

Manuales populares de PC industrial de otras marcas

Chipsee

Chipsee PPC-A72-101 Manual de usuario

Advantech

Advantech UNO-2184G Manual de usuario

MSI

MSI MS-9A76 Manual de usuario

Stackrack

Stackrack THOR200 Manual de usuario

Moxa Technologies

Moxa Technologies DA-682C Series Manual de usuario

Nodka

Nodka eBOX-3000-ETC Manual de usuario

Siemens

Siemens SIMATIC IPC627E Manual de usuario

MSI

MSI MS-9A89 Manual de usuario

Artila

Artila Matrix-516 Manual de usuario

Siemens

Siemens SIMATIC Rack PC 840 V2 Manual de usuario

Advantech

Advantech IPPC-6152A Manual de usuario

Beckhoff

Beckhoff CX9020 Manual de usuario

Dell

Dell Embedded Box PC 5000 Manual de usuario

IBASE Technology

IBASE Technology ASB200-918 Series Manual de usuario

Lenovo

Lenovo ThinkCentre M90q Manual del propietario

IXXAT

IXXAT Econ 100 Manual de usuario

Kontron

Kontron KBox A-151-TGL Manual de usuario

AXIOMTEK

AXIOMTEK ICO500-518 Series Manual de usuario