Mountup MU0015 Manual de usuario
154LBS
70KG
Max:
Max:800x400mm/31.5x16"
Min:200x100mm /8x4"
47"~90"
(A0)
If you have any questions, please contact us via help@jollyholding.com
MU0015 INSTALLATION INSTRUCTION
- 1 -
Velcro Cable Ties X5 Bubble Level X1 HDMI Cable X1
Hammer
3/8"(10mm)
Masonry Drill Bit
7/32"(5.5mm)
Wood Drill Bit
AwlStud Finder
Socket Wrench
1/2"(13mm)
ElectrodrillScrewdriverPencil
3
What is your wall
made of?
Solid concrete
wall?
●This product is designed for use in wood stud or solid concrete wall.
- DO NOT install into drywall alone.
●The wall must be capable of supporting five times the weight of the TV and mount
combined.
●Do not apply this product to any purpose not indicated by MOUNTUP.
●Incorrect installation may result in product damage or body injury. MOUNTUP shall
bear no responsibility for any damage or injury resulted from incorrect installation,
incorrect assembly or misuse.
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the
installation, assembly or use of this product, contact Customer Service via
help@jollyholding.com
5
Safety Caution
2M2M
Band Tape
Drywall with
wood studs?
CAUTION:
Yes --- Perfect!
No --- This mount is NOT compatible.
MAX:
400mm/16"
MAX:800mm/31.5"
Yes --- Perfect!
No --- This mount is NOT compatible.
4
Installation Tools
(Not Included)
2Does your TV
(including accessories)
weigh less than
154 LBS (70KG)?
1Is your TV VESA
equal to/greater than
200x100mm /8x4" and
equal to/less than
800x400mm/31.5x16"?
Before getting started, let’s make sure this mount is perfect for you!
154LBS
70KG
Max:
DO NOT install
into drywall alone
Perfect! Perfect!
Wood Stud Install
Concrete Install
- 2 -
Arm and Wall Plate
Vertical Brackets
End Cap
Hardware Included
01 x1
03 x2
Front Support
02 x1
04 x2
Hardware （Wall /Product)
5/16 x 2½ in
Lag Bolts
x4 x1
CA
Washers
Ø8mm
x4
B
This product contains
small items that could be a choking hazard if
swallowed. Before starting assembly, verify
all parts are included and undamaged. If
any parts are missing or damaged, do not
return the damaged item to your dealer;
please contact our customer service team.
Never use damaged parts!
NOTE: Not all parts and hardware included
will be used.
WARNING:
Open End Wrench
- 3 -
Philips Screws
M6 x 15mm
M6 x 30mm
Philips Screws
M4 x 12mm
M4 x 30mm
Washers
Ø6mm
M4-5-6
Spacers
L10mm
x4
x4 x4x4
Philips Screws
M8 x 25mm
M8 x 45mm
x4
x4 x8 x4
Spacers
L5mm
x8
TV Screws / Washers
M-A M-B M-C M-D M-E M-F
16”
24”
18”
STEP 1-2
Attach the Brackets
Position your brackets over your TV hole pattern - making sure the brackets are centered
and level over the TV hole pattern.
Secure thebrackets using your screw/washer/spacer selection:
(a) for Flat Back
(b) for Round Back / Extra space
CAUTION: Ensure bracket is securely fastened before moving on to the next step.
- 4 -
(a) Flat Back
04
M-E
Not for M8 screws
M-A
Use the shorter screws
M-B
M-C
(a) For Flat Back
1. Select TV screw diameter: Thread screws by hand into the threaded holes on the
back of your TV to select which screw diameter fits your TV.
2. Select TV screw length: When attaching brackets to the TV, be careful not to over
tighten screws and be sure that screws do not bottom out in the mounting holes.
M6M4 M8
Correct Correct
Too Long
Too Short
STEP 1-1 Select Proper TV Screw
STEP 1-2
Attach the Brackets
04
(b) Round Back /
Extra Space
M-E
M-D
M-F
Not for M8 screws
- 5 -
STEP 2A Wall Plate Installation (Wood Stud)
M-A
Use the longer screws
M-B
M-C
2A-1
Locate your studs. Verify and
mark the center of the studs by
finding the stud edges using an
awl, a thin nail, or an
edge-to-edge stud finder.
2A-2
Position the wall plate [01]
at your desired height and
line up the holes with your
stud center line. Level the
wall plate and make the
holes.
16 ~ 24 in
01
(b) For Round Back / Extra Space
Install wall plate [01] using lag
bolts [A] and washers [B].
Tighten the lag bolts [A] until
they are pulled firmly against
the wall plate [01].
STEP 2A Wall Plate Installation (Wood Stud)
- 6 -
2A-4
2A-3
16 ~ 24 in
2
UP
B
A
2.75 in. (70 mm)
7/32 in.
(5.5 mm)
Drill pilot holes using a 7/32 in. (5.5 mm)
diameter drill bit.
IMPORTANT: Pilot holes must be
in. (70 mm).
Be sure to drill into the center of thestud.
drilled to a depth of
STEP 2B Wall Plate Installation (Concrete or Brick)
- 7 -
2B-1 Position the wall plate
[01] at your desired
height , level the wall
plate and mark the pilot
hole locations.
Drill pilot holes
2B-2
2.75in 70 mm
Ø 10 mm
Ø 10 mm
Concrete Wall
Concrete Wall
Install wall plate [01] using
lag bolts [A], washers [B]
and anchors (not included).
Tighten the lag bolts [A]
until they are pulled firmly
against the wall plate [01].
2B-3
B
A
these additional pieces shipped directly to you.
Concrete Wall Anchor
4pcs
Concrete wall anchor (NOT INCLUDED)
2
UP
OPTIONAL Change the arm position on the wall plate
- 8 -
Install wall plate [01] using
lag bolts [A], washers [B]
and anchors (not included).
Tighten the lag bolts [A]
until they are pulled firmly
against the wall plate [01].
Install the End Caps [03] to Front Support [02] with the preassembled screws.
3-1
Pre-assembled scews
STEP 3 Install Front Support and End Cap Together
03 02
If necessary, you can move the Arm Assembly laterally to center your TV, Secure Arm
Assembly to Wall Plate using removed screws.
Remove 4 bolts and washers using a
M6 Allen key (not included).
Slide the arm assembly to
desired placement
Assemble the wall palte and the arm assembly using the 4 bolts and washers
removed from the previous step.
IMPORTANT!
Ensure that the top of the arm
assembly tucks INSIDE the
back of the top wall plate.
1 2
3
3-2 Hang 02 onto 01 and using a screwdriver to secure with preassembled screws [P1]
and washer [P2] .
P3
Remove the
preassembled
screws [P3] and
save to use, then
raise the safety
locks.
Press the safety locks then fasten
the removed screws [P3].
01
Lift and hang the TV with the bracket onto the arm
and wall plate [02].
02 03
STEP 4 Hang TV with brackets onto the arm extensions
- 9 -
04
STEP 3 Install Front Support and End Cap Together
P1
P2
P3
02
S2
- 10 -
Adjustments
(Tilting)
(Leveling)
Tilting Angle Adjustment (+3° / -15°)
Loosen tilting nuts, pull TV to your
desired angle, then fasten tilting nuts
with open end wrench [C].
Loosen
Tighten
Loosen
Tighten
±3°
TV Leveling Adjustment (-3°/+3°)
Loosen 2 leveling bolts on the rear of TV
plate with the open end wrench [C],
adjust to level, and retighten to secure.
C
C
C
C
Tabla de contenidos
Otros manuales de Soporte de TV de Mountup
Mountup
Mountup MU0007 Manual de usuario
Mountup
Mountup MU0012-24K Manual de usuario
Mountup
Mountup MUT0030 Manual de usuario
Mountup
Mountup MU6013A Manual de usuario
Mountup
Mountup MU0010 Manual de usuario
Mountup
Mountup MU0031 Manual de usuario
Mountup
Mountup MU0012 Manual de usuario
Mountup
Mountup MU1009 Manual de usuario
