Motorola Symbol CS3000 Series Manual de usuario
Symbol CS3000 Series Scanner
Product Reference Guide
Chapter 1 Getting Started
Introduction
The Symbol CS3000 Series Scanner captures and stores bar codes for a variety of uses, and transmits bar code
data to a host via USB connection or Bluetooth.
Figure 1-1
Symbol CS3000 Series Scanner
This scanner supports the following host interfaces:
•
USB - The scanner connects to a USB host as a removable storage device, via a cradle or USB cable.
•
Bluetooth - The scanner supports Bluetooth HID connection to a host (the default) where the scanner
emulates a keyboard, as well as Serial Port Profile (SPP) connection where the scanner behaves as if there
is a serial connection.
Mini-USB Port
Scan Button LED
Bluetooth Button/LED
Delete Button
Protective Cover
Reset Button
Getting Started 1 - 5
Scanner Charging LED
The scanner’s LED indicates charging activity (see Table 2-1 on page 2-3). The amber LED blinks slowly during
charging. The scanner’s LED turns solid green when the battery is fully charged.
Connecting to the Host Computer
Batch Connection
See Charging the Scanner Battery on page 1-3 for instructions on connecting the scanner to a host PC via USB.
Bluetooth Connection: Development Options
Serial Port Profile
This Bluetooth profile emulates a serial cable to provide a simply implemented wireless replacement for existing
RS-232 based serial communications applications, including familiar control signals. It is the preferred
communication profile implementation because accidental key strokes from the keyboard or touch screen on the
host are not entered into the bar code data stream.
Human Interface Device Emulation
This Bluetooth profile is a lightweight wrapper of the Human Interface Device protocol defined for USB. Data
transmitted from the Bluetooth scanner appears as keyboard entries to the Bluetooth host (Smartphone, PC, etc).
NOTE To enter batch scanning mode, the scanner cannot be paired to a Bluetooth host (applies to CS3070
model only).
NOTE Wedge data appears within whichever application has input focus.
Chapter 2 Scanning
Introduction
This chapter provides instructions for how to scan bar codes and send the data to a host. Beeper and LED
definitions are also included.
Scanning
See Chapter 1, Getting Started to install and program the scanner. To scan:
1. Aim the scanner at the bar code.
2. Press the scan (+) button.
Figure 2-1
Scanning
3. Ensure the scan line crosses every bar and space of the symbol.
012345
WRONG
012345
RIGHT
3 - 4 Symbol CS3000 Series Scanner Product Reference Guide
Reset
To reset the scanner and apply parameters from the configuration file, scan the following bar code.
Reset
Reset Factory Defaults
To reset the scanner to factory defaults, scan the following bar code. This rebuilds the configuration file from
program memory.
Reset Factory Defaults
User Preferences 3 - 5
Set Date and Time
Set Date
Scan the Set Date bar code, then scan six numeric digits in the format mmddyy
from
Numeric Bar Codes for Date
and Time Settings on page 3-6
(first two for the month, second two for the day, third two for the year).
Set Date
Set Time
Scan the Set Time bar code, then scan four numeric digits in the format hhmm from Numeric Bar Codes for Date
and Time Settings on page 3-6 representing the time according to the 24 hour clock (first two for the hour, second
two for the minute).
For example, to set the time to 8:45 in the morning, scan the following bar code, then scan 0, 8, 4, 5. To set the
time to 3:07 in the afternoon, scan 1, 5, 0, 7.
Set Time
Cancel Date and Time Setting
Scan the Cancel Set Date/Time bar code to cancel the date and time settings.
Cancel Set Date/Time
NOTE You must scan the configuration bar codes to set the time and date stamp on the scanner. The time and
date can not be set or edited in the config.ini file. This setting persists for three months if the scanner is
not used.
NOTE To change the date format from mmddyy, see DateFormat on page 1-23.
NOTE To change the time format between 12h and 24h, see TimeFormat on page 1-23.
3 - 6 Symbol CS3000 Series Scanner Product Reference Guide
Numeric Bar Codes for Date and Time Settings
0
1
2
3
4
5
6
7
8
9
Enter
User Preferences 3 - 7
Clear Data
Scan the following bar code to clear all batch bar code data on the scanner. This deletes the BarcodeFile.txt from
the scanner.
Clear Data
3 - 8 Symbol CS3000 Series Scanner Product Reference Guide
Beeper Settings
Beeper Volume
Parameter # 0x8C
To select a decode beep volume, scan the appropriate bar code.
Low
(0x02)
*Medium
(0x01)
High
(0x00)
User Preferences 3 - 9
Beeper Tone
Parameter # 0x91
To select a decode beep frequency (tone), scan the appropriate bar code.
Low Frequency
(0x02)
*Medium Frequency
(0x01)
High Frequency
(0x00)
Otros manuales para Symbol CS3000 Series
5
Tabla de contenidos
Otros manuales de Escáner de Motorola
Motorola
Motorola RS507 Series Manual de usuario
Motorola
Motorola MC9090G - RFID - Win Mobile 5.0 624 MHz Manual de usuario
Motorola
Motorola Symbol CS3000 Series Manual de usuario
Motorola
Motorola Symbol LS3408 Manual de instalación y operación
Motorola
Motorola Symbol CS3000 Series Manual de usuario
Motorola
Motorola RS309 Manual de usuario
Motorola
Motorola Symbol CS3000 Series Manual de instalación y operación
Motorola
Motorola DS9208-1D Manual de instalación y operación
Motorola
Motorola Symbol CS3070 Manual de operación y mantenimiento
Motorola
Motorola DS3508 Manual de instalación y operación
