Motorola PMLN6536 Manual de usuario
blank.fm Page 1 Friday, April 26, 2013 2:35 PM
1
English
FOREWORD
RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios
ATTENTION!
Before using this product, read the RF Energy Exposure
and Product Safety Guide that ships with the radio which
contains instructions for safe usage and RF energy
awareness and control for compliance with applicable
standards and regulation.
SURVEILLANCE KITS
The Motorola Surveillance Kits for Two-Way Radio
Communications provide discrete remote monitoring and
remote control of the push-to-talk function of the radio.
They are designed for use when the operator would like to
conceal two-way radio usage from others or to prevent
others from hearing radio transmission.
NOTE: It is the user’s responsibility to ensure that the
surveillance features of the selected accessory are
suitable for his/her intended use.
Features:
• Lightweight earphone
• Low-profile, flexible, transparent, quick disconnect
acoustic tube
• Flexible, high-grade cable for demanding applications.
68012009036a.book Page 1 Saturday, May 11, 2013 1:00 PM
2
English
OPERATION
Turn the radio on and operate it as explained in the
operating instructions supplied with the radio. When the
surveillance kit is connected to the radio, the radio’s
speaker is muted, and audio is only heard from the
earpiece speaker. When using the 2-wire kit, transmit by
pressing the PTT on the combined mic/PTT and speak into
the surveillance kit mic in a normal manner.
MAINTENANCE
Motorola recommends the periodic cleaning of the eartip
with a mild soap and water solution to extend the life of the
accessory. Store the accessory away from high
temperature conditions to prolong the life of the accessory.
ACOUSTIC SAFETY
Exposure to loud noises from any source for extended
periods of time may temporarily or permanently affect your
hearing. The louder the radio’s volume, the less time is
required before your hearing can be affected. Hearing
damage from loud noises is sometimes undetectable at first
and can have a cumulative effect.
To protect your hearing:
• Use the lowest volume necessary to do your job.
• Increase the volume only if you are in noisy
surroundings.
• Reduce the volume before connecting headset or
earpiece.
68012009036a.book Page 2 Saturday, May 11, 2013 1:00 PM
3
English
• Limit the amount of time you use headsets or
earpieces at high volume.
• When using the radio without a headset or earpiece,
do not place the radio’s speaker directly against your
ear.
PRODUCT DEFINITIONS
2-Wire Combined Mic and PTT Surveillance
Kit
The 2-wire kits have two cables: one for the earpiece with
comfortable acoustic tube and standard eartip, and one for
the microphone/PTT switch combination. Both cords are
long enough to wear underneath a shirt, jacket or other
clothing. The microphone operates with a PTT switch that
is small enough to fit in one’s palm, and is easily concealed
by closing the hand.
Noise Attenuating Kit (Accessory)
Recommended for high noise environments, a noise
attenuating kit with a foam eartube can easily replace the
standard size eartip on 2-wire surveillance kit. See the
replacement parts table for part number identification.
Clear Comfortable Earpiece(s) (Accessory)
The Clear Comfortable Earpiece(s) are molded from
hypo-allergenic plastic and designed to fit entirely inside
the ear. Its open frame still allows the user to hear ambient
noise. See the replacement parts table for part number
identification.
68012009036a.book Page 3 Saturday, May 11, 2013 1:00 PM
4
English
REPLACEMENT PARTS AND
ACCESSORIES
Part Number Description
5080370E97 Standard Rubber Eartip 25/bag
5080384F72 Foam Earplug 50 pairs
5080369E38 Standard Earphone 1 each
5080369E39 Extra Loud Earphone 1 each
RLN4760
RLN4761
RLN4762
RLN4763
RLN4764
RLN4765
Clear Comfortable Earpieces
Right Ear:
Small 1 each
Medium 1 each
Large 1 each
Left Ear:
Small 1 each
Medium 1 each
Large 1 each
RLN6242 Quick Disconnect 1 each
Acoustic Tube
Replacement
RLN6230 Noise Attenuating kit with 1 each
foam tip-black
RLN6231 Noise Attenuating kit with 1 each
foam tip-beige
68012009036a.book Page 4 Saturday, May 11, 2013 1:00 PM
5
English
ATTACHING THE SURVEILLANCE KIT
1. Turn the radio off. Attaching the surveillance kit while
the radio is on may cause the radio to transmit
constantly, locking up your radio system. If this should
happen, turn off the radio. The radio can then be
turned back on, restoring normal operations.
2. Remove any dust caps or covers from the radio
accessory connector.
3. Attach the surveillance kit to the radio accessory
connector.
To change the surveillance component parts refer to the
exploded view (see Figure 1) and proceed as follows:
a.To change eartips on an acoustic tube detach the
eartip from the elbow. Position the replacement
eartip over the elbow and press firmly on the eartip
secure.
b.To change a noise attenuating kit on an acoustic tube
assembly or to change eartubes detached to the
eartip or eartube piece from the elbow. Position the
tube end of a new foam eartube piece over the
elbow and press firmly on the eartube to secure.
c.To replace an acoustic tube assembly, simply grab
the quick disconnect and turn a 1/4 turn to the left.
Gently pull out the acoustic tube. Plug new tube into
the adapter and turn clockwise 90° to secure.
d.To change earphones, gently pry the acoustic tube
adapter away from the earphone by sliding a thin
object between the adapter and the earphone. Work
68012009036a.book Page 5 Saturday, May 11, 2013 1:00 PM
6
English
the thin object around the circumference of the
earphone to free adapter. Detach the cable
connector from the earphone. Reconnect the
accessory cable connector to the new earphone by
snapping firmly in place. Snap the acoustic tube
adapter onto the earphone.
Figure 1: Surveillance component parts
Connector
Cable
Earphone
Acoustic Tube
Adapter
Quick Disconnect
Acoustic Tube
Elbow
Eartip
Clear Comfortable Earpiece
Noise Attenuating
Eartube/Earplug
68012009036a.book Page 6 Saturday, May 11, 2013 1:00 PM
7
English
Figure 2: Digital Symbol Marking
Radios with this “Digital Symbol” are digital capable radios
and require the use of accessories with the same “Digital
Symbol”. These accessories with the “Digital Symbol” have
been optimized for digital audio Transmit and Receive. Use
of non-approved accessories may result in degradation of
audio quality.
Digital Symbol
68012009036a.book Page 7 Saturday, May 11, 2013 1:00 PM
8
English
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M
logo are trademarks or registered trademarks of Motorola
Trademark Holdings, LLC and are used under license. All other
trademarks are the property of their respective owners.
© 2013 Motorola Solutions, Inc. All rights reserved.
68012009036a.book Page 8 Saturday, May 11, 2013 1:00 PM
Tabla de contenidos
Idiomas:
Otros manuales de Auriculares de Motorola
Motorola
Motorola S705 - Soundpilot Manual de usuario
Motorola
Motorola MOTO BUDS-S ANC Manual de usuario
Motorola
Motorola PMLN6533 Manual de usuario
Motorola
Motorola MOTO BUDS 135 Manual de usuario
Motorola
Motorola PMLN8311 Manual de usuario
Motorola
Motorola motorola Manual de usuario
Motorola
Motorola MOTO W233 RENEW Manual de usuario
Motorola
Motorola MOTO BUDS 120 Manual de usuario
Motorola
Motorola S10-HD Manual de usuario
Motorola
Motorola S10-HD Manual de usuario
Motorola
Motorola Buds Hoja de especificaciones
Motorola
Motorola Bluetooth Module Manual de usuario
Motorola
Motorola VERVE Loop Manual
Motorola
Motorola PMLN8337 Manual de usuario
Motorola
Motorola Talkabout MHP71 Manual de usuario
Motorola
Motorola SH067 Manual de usuario
Motorola
Motorola S805 - -QSG-EMEA Manual de usuario
Motorola
Motorola S805 - -QSG-EMEA Manual de usuario
Motorola
Motorola MOTO SURROUND Hoja de instrucciones
Motorola
Motorola Verveloop 2+ Manual de usuario
