morse 0309 Manual de usuario
The Specialist In Drum Handling Equipment
Model 185AM
Kontrol-Karrier with Spark Resistant Parts
Contents
Page
Receiving Procedures. . . . . . . . . . . . . . . . . . . . 1
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Information. . . . . . . . . . . . . . . . . . . . . 1 - 2
Machine Description. . . . . . . . . . . . . . . . . . . 3
Operating Instructions. . . . . . . . . . . . . . . . . . . . 3
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Parts List and Diagram. . . . . . . . . . . . . . . . . 4
Operator’s Manual
for Morse Kontrol-Karriers
Model 185AM
Serial number 0507 to 0309 (MMYY)
MORSE Mfg. Co., Inc. • 727 West Manlius Street • P.O. Box 518 • East Syracuse, NY 13057-0518
Copyright 2009 - Morse Mfg. Co., Inc. Form PL185AM (0507-0309) (Updated March 15, 2018 2:16 PM) 1
Receiving Procedures
Every Morse drum handler is inspected prior to shipping. However,
damage may be incurred during transit.
Check for visible damage. If you choose to accept damaged•
freight, always sign noting the damage on the Bill of
Lading.
Document the damage and have the truck driver sign. We•
recommend keeping a digital camera at your receiving dock
for this purpose.
Open packages expeditiously to check the condition of the•
goods. There is only a 24 hour window to notify the carrier
of any concealed damage.
Immediately• report all damage to the shipping company!
Then you may contact Morse for assistance with your
freight claim.
Morse Manufacturing will not be held responsible for any•
damaged freight that is not signed for as damaged.
Limited 2 Year Warranty
Morse drum handling equipment is guaranteed against defects in
workmanship or materials for two years when used properly within
its rated capacity. Warranty does not cover wear from normal use or
damage from accident or abuse. Motors and other purchased parts
carry the warranties of their manufacturers.
For warranty claims, contact your Morse Dealer to obtain a
return authorization number, and for return freight advice. Return
freight must be prepaid.
In all instances, liability is limited to the purchase price paid or to
repairing or replacing the product. Customer assumes liability for
anymodications,unauthorizedrepairsorpartssubstitution.
Safety Information
While Morse Manufacturing Co. drum handling equipment is
engineeredforsafetyandefciency,ahighdegreeofresponsibility
must be placed upon the machine operator to follow safe practices,
based primarily on common sense, upon which true safety
depends.
Failure to follow the safety precautions in this manual can result in
personal injury or property damage. Observe the same precautions
as with similar machinery where carelessness in operating or
maintenance is hazardous to personnel. Carefully read the safety
precautions below and throughout this manual.
Review the Material Safety Data Sheet(s) for the material(s) in
the drum(s) and take all necessary precautions. Safety shoes,
work gloves, hard hat and other personal protective devices are
recommended.
Prior to initial use, inspect all moving parts. Perform necessary load
test, inspections, operator training, etc.
The Specialist In Drum Handling Equipment
Model 185AM
Kontrol-Karrier with Spark Resistant Parts
Operator’s Manual for Morse Model 185AM Kontrol-Karrier with Spark Resistant Parts
Serial number 0507 to 0309 (MMYY)
www.morsedrum.com
Copyright 2009 - Morse Mfg. Co., Inc. Form PL185AM (0507-0309) (Updated March 15, 2018 2:16 PM) 2
Safety Information (continued)
DANGER - Indicates a situation which, if not avoided, will result in serious injury or death.
This signal word is limited to the most extreme situations.
WARNING - Indicates a situation which, if not avoided, could result in serious injury or
death.
CAUTION - Indicates a situation which, if not avoided, can result in damage to the machine.
WARNING - Kontrol-Karriers are designed to handle one drum of the types listed at the top of page 3.
Machine Description. DO NOT attempt to handle any other type of drum or object.
WARNING - DO NOT exceed the weight capacity of 800 Lb.
WARNING - DO NOT operate damaged or malfunctioning unit, or a unit with missing parts.
WARNING - DO NOT lift people or suspend loads over people. Stay clear of suspended loads.
WARNING - DO NOT lift loads higher than necessary.
WARNING - DO NOT leave suspended loads unattended.
WARNING - DO NOT remove or obscure warning labels.
WARNING -DONOToperatewithoutrsthavingreadandunderstoodoperatingmanual.
WARNING - DO NOT make alterations or modify the unit. Under no circumstances should any
modicationsbemadetotheMorsemachinerywithoutfactoryauthorization.Anymodicationsmay
voidthewarranty.Thismachinewasdesignedtoperformaspecicjobandalterationsmayresultin
injury to operator or machine.
WARNING - Wear safety shoes with non-slip soles and hard toe protection.
CAUTION: DONOTallowdrumtoimpactonoor,ground,etc.
The Specialist In Drum Handling Equipment
Model 185AM
Kontrol-Karrier with Spark Resistant Parts
Operator’s Manual for Morse Model 185AM Kontrol-Karrier with Spark Resistant Parts
Serial number 0507 to 0309 (MMYY)
www.morsedrum.com
Copyright 2009 - Morse Mfg. Co., Inc. Form PL185AM (0507-0309) (Updated March 15, 2018 2:16 PM) 3
Machine Description
Model 185AM Kontrol-Karrier is designed to lift, transport and
dispense a standard 55-gallon steel drum 22.5” in diameter. The
maximum capacity is 800 Lb.
Options
A smaller diameter drum can be handled with the correct size
55/30M Series DiameterAdaptor installed (see DiameterAdaptor
literature).
Important
Review the Material Safety Data Sheet(s) for the material(s) in the drum(s) and take all necessary precautions. Safety shoes, work1.
gloves, hard hat and other personal protective devices are recommended.
Please read all instructions thoroughly before attempting to operate your new Morse drum handler.2.
The185SeriesKontrol-Karriershaveamaximumcapacityratingof800Lb.foraFULLdrumand500Lb.foraHALF-FULLdrum,and3.
are designed to lift and move a drum of the size and type noted above. DO NOT exceed this rating. Exceeding this rating or handling
drums other than those mentioned above is unsafe and could result in equipment damage, excessive wear, awkward or dangerous
handling.
When loading, unloading, operating, or maintaining your MORSE drum handler, always use care and good judgment. Maintain secure4.
footingandarmhold.Keephandsandlooseclothingawayfromallmovingparts.Neverallowanyonetobebelowanypartofaraised
drum handler or drum. Read operating instructions and review the pictures in the sales brochure before operation.
The185Seriesarea“Group1structuralandmechanical”below-the-hookliftingdevicewhicharecoveredbytheAmericanNational5.
StandardASMEB30.20.Theusershouldcomplywithallaspectsofthisstandard.
Operating Instructions
StartwithKontrol-Karrierontheoor.Lowerhoistandengagehoisthook1.
to lift Kontrol-Karrier.
RaisehoisttoliftKontrol-Karrierclearofoorandtransportittothedrum.2.
Suspend Kontrol-Karrier at a height which aligns drum saddle with center3.
of drum.
With binder chain (item 25) hanging freely, push Kontrol-Karrier against4.
drum so that saddle will encircle drum.
Secure the drum: drape the binder chain (item 25) across the face of the5.
drum and engage a link into the slot in the ratchet (item 36). Turn the ratchet
clockwise to tighten chain. If the chain doesn’t cinch tightly on the drum,
lift the pawl (item 33) to loosen and release the chain and try again with a
different link in the notch. Firm hand pressure on the ratchet handle should
tightenthechainsufcientlytohold the drum. DO NOTusemechanical
aids such as a pipe to extend handle for extra leverage.
Raise hoist and position drum at pouring station.6.
Pour the drum by pulling on the pull chain (item 4) and rotating the drum to7.
a suitable pouring angle. For best control of drum pouring angle, pay out
one side of the chain loop while pulling in the other side, thus being able to
hold back the drum rotation. The chain lock on the bottom of the power arm can be used to prevent drum rotation. To do so, criss cross
the chain and insert in each slot of the chain lock.
Afterpouringiscompleted,rotatedrumbacktoverticalpositionandlowerhoisttoreturndrumtooor.8.
To remove drum: Pull ratchet handle clockwise to relieve pressure on ratchet teeth. Lift pawl handle (item 33) to release teeth9.
engagement and rotate ratchet to loosen chain and allow its removal from notch.
Maintenance
Lubricate gear teeth and roller chain.1.
Clean and oil ratchet, pawl and other moving parts periodically to maintain free action and reduce wear. Clean and lubricate more often2.
in environment where dust, dirt or other foreign particals will effect the performance of moving parts.
Periodically inspect all moving parts, framework and contact areas for signs of wear, fatigue or loosening. Tighten, adjust or replace3.
parts as necessary to prevent failure and maintain proper function.
The Specialist In Drum Handling Equipment
Model 185AM
Kontrol-Karrier with Spark Resistant Parts
Operator’s Manual for Morse Model 185AM Kontrol-Karrier with Spark Resistant Parts
Serial number 0507 to 0309 (MMYY)
www.morsedrum.com
Copyright 2009 - Morse Mfg. Co., Inc. Form PL185AM (0507-0309) (Updated March 15, 2018 2:16 PM) 4
ITEM # QTY. PART # DESCRIPTION
1 * 1 1-P CHAINWHEEL#1-1/2W/GUIDESR
2 1 3-P TRIANGLE&SHAFTW/BOLTS
3 12 2B-P CHAIN,1/0BRASS,PERFT
4 * 1 2435-P CHAIN,PULL,BRASS,1/0,12’
5 * 2 735-P KEY,WOODRUFF,SIZE9,ASA606
6 * 1 19-P BEARING,3/4”IDX2-1/2”
7 2 55-P WASHER,3/4SAEFL1-1/2OD
8 * 1 11-P SPROCKET,#3512T,3/4”BORE
9 1 15-P COLLAR,3/4”ID
10 * 1 7-P BEARING,3/4”IDX1-1/2”
11 1 16-P COLLAR,1”ID
12 * 1 18-P BEARING,1”IDX2-1/2”
13 * 1 12-P CHAIN,ROLLER,#35W/MLINK
14 * 1 795-P LINK,MASTER,#35CHAIN
15 * 1 13-P SPROCKET#3536T,3/4”BORE
16 * 1 14-P GEAR,PINION,7TOOTH
17 1 29-P SPACER,SPURGEAR.15”
18 2 22-P SHCS,3/8-24X5/8
19 * 1 23-P GEAR,SPUR,72T,1”HOLE
ITEM # QTY. PART # DESCRIPTION
20 1 47M-P OVERHEADYOKE,185MSERIES,SR
21 1 725AM-P** SADDLEASM,285AM,SR
23 1 4079-P HHCS,M8X60MMCL8.8,8MM
24 1 4081-P NUT,M8ESNA,8MM
25 * 1 4408-P CHAIN,CINCH,9/32SS,38LINK
27 1 64-P ROLLPIN,3/16X1-1/4
29 1 1296-P HHCS,1/4-20X7-1/2GR5
30 1 1297-P NUT,1/4-20REVHEXLOCK
31 1 4409-P GRIP,HANDLE7/8”X4-3/4”RED
32 * 1 169-P SPRING,PAWL
33 1 168-P PAWL,WITHDRILLEDHOLE
34 1 170-P SCREW,3/8DIAX5/8SHOULDER
35 1 710-P RETAINER,RATCHETPUSHNUT3/4
36 1 165SS-P RATCHET,STEEL-IT
37 1 165KITM-P KIT,RATCHETTIGHTENER,SR
38 1 PLATE,RATCHETHINGE,1/4”,SR(NOTSOLDSEPARATELY)
39 * 1 726M-P *** HINGEPLATECPT,1/4”SR
* Recommended spare parts
**Item21“SADDLEASM”(drumholderassembly)includesappropriateattachedmovingparts
(items 23, 24, 25, 29, 30 and 39).
***Item39“HINGEPLATECOMPLETE”includesallcomponentsofitem37installedontoitem38.
Otros manuales para 0309
1
Este manual sirve para los siguientes modelos
2
Otros manuales de Almacenamiento de morse
morse
morse 80i Manual de usuario
morse
morse 82A-124 Manual de usuario
morse
morse 400A-60-114 Manual de usuario
morse
morse Hydra-Lift 400A-60 Manual de usuario
morse
morse 400AM-72-124 Manual de usuario
morse
morse 510-114 Manual de usuario
morse
morse 0409 Manual de usuario
morse
morse 82AM-GT Manual de usuario
morse
morse 82AM Manual de usuario
morse
morse 400A-72 Manual de usuario
morse
morse 0719 Manual de usuario
morse
morse 85i/E Manual de usuario
morse
morse MORCINCH 4556SS-P Manual de usuario
morse
morse 400A-96-125 Manual de usuario
morse
morse 310 Series Manual de usuario
morse
morse 0409 Manual de usuario
morse
morse 82A-SS Manual de usuario
morse
morse 185XGR Manual de usuario
morse
morse 82A-125 Manual de usuario
morse
morse 515-N-124 Manual de usuario
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario