Morse 40 Manual de usuario

The Specialist In Drum Handling Equipment

Models 40 and 40-30

Drum Cradle Trucks

[email protected] 103 Kuhn Rd.

Syracuse, NY 13208 U.S.A.

morsedrum.com (315) 437-8475

CONTENTS

Page

Receiving Procedures. . . . . . . . . . . . . . . . . . . . 1

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety Information. . . . . . . . . . . . . . . . . . . . . 1 - 2

Machine Description. . . . . . . . . . . . . . . . . . . 2

Option. . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . 2

Assembly Instructions. . . . . . . . . . . . . . . . . . 3

Parts Lists and Diagrams. . . . . . . . . . . . . . . . . . 4

Operator’s Manual

for Morse Drum Cradle Truck

Models 40 and 40-30

Receiving Procedures

Every Morse drum handler is inspected prior to shipping. However,

damage may be incurred during transit.

Check for visible damage. If you choose to accept damaged•

freight, always sign noting the damage on the Bill of

Lading.

Document the damage and have the truck driver sign. We•

recommend keeping a digital camera at your receiving dock

for this purpose.

Open packages expeditiously to check the condition of the•

goods. There is only a 24 hour window to notify the carrier

of any concealed damage.

Immediately• report all damage to the shipping company!

Then you may contact Morse for assistance with your

freight claim.

Morse Manufacturing will not be held responsible for any•

damaged freight that is not signed for as damaged.

Limited 2 Year Warranty

Morse drum handling equipment is guaranteed against defects in

workmanship or materials for two years when used properly within

its rated capacity. Warranty does not cover wear from normal use

or damage from accident or abuse. Motors and other purchased

parts carry the warranties of their manufacturers.

For warranty claims, contact your Morse Dealer to obtain a

return authorization number, and for return freight advice. Return

freight must be prepaid.

In all instances, liability is limited to the purchase price paid or to

repairing or replacing the product. Customer assumes liability for

anymodications,unauthorizedrepairsorpartssubstitution.

Safety Information

While Morse Manufacturing Co. drum handling equipment is

engineeredforsafetyande󰀩ciency,ahighdegreeofresponsibility

must be placed upon the machine operator to follow safe practices,

based primarily on common sense, upon which true safety

depends.

Failure to follow the safety precautions in this manual can result in

personal injury or property damage. Observe the same precautions

as with similar machinery where carelessness in operating or

maintenance is hazardous to personnel. Carefully read the safety

precautions below and throughout this manual.

Review the Material Safety Data Sheet(s) for the material(s) in

the drum(s) and take all necessary precautions. Safety shoes,

work gloves, hard hat and other personal protective devices are

recommended.

Prior to initial use, inspect all moving parts. Perform necessary

load test, inspections, operator training, etc.

The Specialist In Drum Handling Equipment

Models 40 and 40-30

Drum Cradle Trucks

Operator’s Manual for Morse Drum Cradle Truck Models 40 and 40-30

morsedrum.com

Safety Information (continued)

DANGER - Indicates a situation which, if not avoided, will result in serious injury or death.

This signal word is limited to the most extreme situations.

WARNING - Indicates a situation which, if not avoided, could result in serious injury or death.

CAUTION - Indicates a situation which, if not avoided, can result in damage to the machine.

WARNING - The Drum Cradle Truck is designed to handle one drum of the types listed below under Machine

Description. DO NOT attempt to handle any other type of drum or object. DO NOT exceed the weight capacity

of 700 Lb. (318 kg).

WARNING -DoNotModifytheUnit.UndernocircumstancesshouldanymodicationsbemadetotheMorse

machinerywithoutfactoryauthorization.Anymodicationsmayvoidthewarranty.Thismachinewasdesigned

toperformaspecicjobandalterationsmayresultininjurytooperatorormachine.

WARNING -NoLooseFittingClothing.Wearclose-ttingclothingandsafetyequipmentappropriatetothejob.

Loosettingclothingmaybecomecaughtonthemachineryandcauseseverepersonalinjury.

CAUTION - Wear safety shoes with non-slip soles and hard toe protection.

CAUTION: DONOTallowdrumtoimpactonoor,ground,ordumpingstation,etc.

Machine Description

The model 40 is designed to tilt an upright 55-gallon steel drum to horizontal for dispensing. The top rim of a 55-gallon (210 liter) steel

drumis18.5”(47cm)fromtheoorwheninhorizontalpositiononthemodel40.Model40-30isdesignedtotiltanupright30-gallon

(114 liter) steel drum to horizontal for dispensing.

The maximum full-drum capacity is 700 Lb. (318 kg).

Option

Model 31 Tipping Lever sold separately for use with Model 40 or Model 40-30 Drum Cradle assists in

pulling over your heavy drum from upright onto the drum cradle. Constructed with 40” (101.6 cm) steel

tubing with malleable iron double hook to engage the upper rim of your drum.

Maintenance

Periodically inspect all moving parts, framework and contact areas for signs of wear, fatigue or1.

loosening. Tighten, adjust or replace parts as necessary to prevent failure and maintain proper

function.

Apply a small amount of bearing grease to wheel bearing surface on each axle periodically.2.

Order replacement parts through your Morse Dealer.3.

Model 40 Cradle Truck shown with

Optional Model 31 Tipping Lever.

WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and

2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to

the State of California to cause birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov

The Specialist In Drum Handling Equipment

Models 40 and 40-30

Drum Cradle Trucks

Operator’s Manual for Morse Drum Cradle Truck Models 40 and 40-30

morsedrum.com

Assembly Instructions

Attach Front Axle and Wheels1.

(Rear Axle will be installed last)

Remove paint from ends of each axle. Apply a small

amount of bearing grease to wheel bearing surface on

each axle. Slide one wheel (item 5) onto each end of

both axles (item 6). With the angle iron on each side

frame (item 1 & 2) facing away from each other (see

diagram at right), insert threaded ends of axles into holes

in side frames and hand tighten a 3/8 nut (item 7) onto

each axle end.

DO NOT TIGHTEN BOLTS UNTIL CRADLE TRUCK

IS ENTIRELY ASSEMBLED

Attach Nose Piece2.

Fasten nose piece (item 4) to top of side frames using

four 5/16 x 5/8” bolts (item 8). Hand tighten 5/16 nut

(item 9) on each bolt.

Attach Back Strap3.

Fasten back strap (item 3) to back of side frames using

four 5/16 x 5/8” bolts (item 8) and 5/16 nuts (item 9).

Hand Tighten each bolt.

Attach Rear Axle4.

Tighten All Nuts and Bolts5.

Tighten bolts and nuts, alternating left and right to

maintain straight frame.

For replacement parts, please contact your Morse dealer.•

When ordering parts, please specify:•

Part number and description•

Model and Serial numbers•

The Specialist In Drum Handling Equipment

Models 40 and 40-30

Drum Cradle Trucks

Operator’s Manual for Morse Drum Cradle Truck Models 40 and 40-30

morsedrum.com

Model 40

ITEM QTY. PART # DESCRIPTION

1 1 1910L-P SIDE FRAME WELD, LEFT, 40

2 1 1910R-P SIDE FRAME WELD, RIGHT 40

3 1 1915-P ASM, BACK STRAP, 40

4 1 1918-P WELD, NOSE PIECE, 40

5 4 210-P WHEEL, MORTUF 3” X 1/2”BORE 36

6 2 209-P AXLE, 5/8” X 18”, 40

7 4 1169-P NUT, 3/8-16 REV HEX LOCK

8 8 215-P HHCS, 5/16-18 X 5/8 GR2

9 8 1634-P NUT, 5/16-18 WHIZ LOCK

Model 40-30

ITEM QTY. PART # DESCRIPTION

1 1 1910L-P SIDE FRAME WELD, LEFT, 40

2 1 1910R-P SIDE FRAME WELD, RIGHT 40

3 1 1922-P ASM, BACK STRAP, 40-30

4 1 1918-P WELD, NOSE PIECE, 40

5 4 210-P WHEEL, MORTUF 3” X 1/2”BORE 36

6 2 209-P AXLE, 5/8” X 18”, 40

7 4 1169-P NUT, 3/8-16 REV HEX LOCK

8 8 215-P HHCS, 5/16-18 X 5/8 GR2

9 8 1634-P NUT, 5/16-18 WHIZ LOCK

Este manual sirve para los siguientes modelos

Otros manuales de Sistema de elevación de morse

morse

morse 81 Manual de usuario

morse

morse 515-N-110 Manual de usuario

morse

morse 195A-A Manual de usuario

morse

morse 400A-96-127 Manual de usuario

morse

morse 185M-HD Series Manual de usuario

morse

morse 515SS-N-110 Manual de usuario

morse

morse 400AM-60 Manual de usuario

morse

morse PILOT 900 Manual de usuario

morse

morse 520 Manual de usuario

morse

morse 405M Manual de usuario

morse

morse Hydra-Lift Drum Karrier 400AM-60-124 Manual de usuario

morse

morse 400AM-72-114 Manual de usuario

morse

morse 185A-HDSS Manual de usuario

morse

morse 510SS-110 Manual de usuario

morse

morse 400Z-60 Manual de usuario

morse

morse 510M-114 Manual de usuario

morse

morse 185i/E Manual de usuario

morse

morse 525-N-115 Manual de usuario

morse

morse 92 Series Manual de usuario

morse

morse MORStak 289F Manual de usuario

morse

morse 410-114 Manual de usuario

morse

morse 515-N-115 Manual de usuario

morse

morse 400A-72-120 Manual de usuario

morse

morse 400A-96SS Manual de usuario

Manuales populares de Sistema de elevación de otras marcas

Braun

Braun NL955 Series Manual de usuario

haacon

haacon 1889.10 Manual de usuario

Protekt

Protekt AT 252 Manual de usuario

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manual de usuario

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manual de usuario

Genie

Genie Z-60/34 Manual de usuario

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manual de usuario

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manual de usuario

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manual de programación

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manual de programación

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manual de programación

BERG

BERG BeNomic EasyLeaf Manual de usuario

Powermate

Powermate LiftGate LG-3 Manual de usuario

Snorkel

Snorkel TM12 Series Manual de usuario

Terberg

Terberg OMNIDEKA Manual de usuario

Harmar Mobility

Harmar Mobility AL625 Instrucciones de funcionamiento

Rotary

Rotary SPO16 Manual de usuario

Ricon

Ricon Mirage F9T Manual de usuario

morse 40 Manual de usuario

Manuales populares de Sistema de elevación de otras marcas