moov8 Cargo Manual de usuario
Health, Mobility, Adventure
Cargo
®
User Manual
Cargo
2
Dear Esteemed Buyer,
Thanks for purchasing the Moov8:Cargo. This bike is an electric pedal assist bike (EPAB or Pedalecs). It is equipped with pedals
and a power-assisted electric motor, which can be driven by both manpower and with the assistance of electric power.
Travelling is an everyday necessity and adopting an active means of transportation like an electric bike goes a long way to not
only helping people get fit and healthy but also lowering their risk of illness, improving air quality and reducing congestion.
Electric bikes can help conserve our environment in a number of ways:
A zero-emission e-bike is a pollution-free and sustainable mode of transport.
Bikes, scooters, and personal mobility vehicles reduce the need to build, service and dispose of cars.
Less cars means less space required for roadways, leaving more space for residential zones, parks and recreation
areas.
For your safety please ride with caution, wear a helmet and protective gear, and follow the local traffic rules.
Please read the manual carefully, check your bike before riding, and practice before riding on the road.
Have a pleasant ride!
Move out with Moov8
3
Cargo Diagram
Assembly
Stem folding lock
Included in the box:
User Manual
Battery Charger
Front Basket
USB Port
Tool kit
Derailleur shifter
Display
Brake lever x 2
Headlight
Disc 1
Battery Case
Battery Lock
Disc 2
Motor
Rear light
Seat post buckle
Saddle
Front basket
4
Assembly (1/3)
Step 1. Saddle assembly
Open seat post buckle.
Step 3. Pedal assembly
Take the pedal and tools from
packing carton, tighten pedal and lock
with wrench.
Step 2. Saddle assembly
Insert seat post, adjust seat
height and direction, and lock
seat post buckle.
5
Assembly (2/3)
① Tear off sticker on the
stem and screw out bolt
with Allen key.
Step 4. Stem assembly
② Set head tube
(unfolded) in the frame,
and lock screw B and C,
unlock the stem folding
lock and fold stem.
③ Set the Gasket and
screw A into stem, and lock
by Allen key.
④Unfold the handlebars
and lock the folding lock.
Screw A
Screw B & C
Screw A
6
Assembly (3/3)
① Loosen the quick release lever and insert into the fork
dropouts.
Step 5. Installing the front wheel
② tighten the quick release level.
7
Battery remove/install
Assembling
battery
Push the battery
into slot.
Removing battery
① Turn the key
with one hand
② pulling out the
battery with your
other hand
Power indicator light
Power button
USB port #1
Battery charging port
Precautions for battery use:
Please fully charge the battery when charging for the first time.
When the battery is not in use for a long time, take it out and
charge at least once a month.
Try not to draining the battery completely during the ride. Please
charge the battery when one of the LED battery indictors is left.
Waterproof note: the battery is not waterproof, please do not
use the bike in rain or water for an extended period of time.
8
Display Control
power on/off
Press and the hold power button
to switch on and switch off.
assist level selection
Press the “+” up or “-“down
button to increase or decrease
the pedal assist level 1-5
light on/off
Press and hold the light
button to on/off the light.
walk assist
Press “-” and select on the
display then press & continue to hold
the “-” button to activate up to
6km/h walk assist function. Walk
assist will be deactivated when you
release the “-“button.
mode (i)
Press the mode button to see various
parameters like avg. speed, max.
speed, trip time etc.
There is a removable USB port in the box. It can be
used by connecting to a port behind the display.
USB Port #2
Display Control
Display
9
Routine Maintenance
Lubrication
Frequency
Component
Lubricant
How to Lubricate
Weekly
Chain Derailleur
Pulleys Derailleurs
Brake Calipers
Brake Levers
Chain Lube or Light Oil
Chain Lube or Light Oil
Oil
Oil
Oil
Brush on or Squirt
Brush on or Squirt
Oil Can
3 drops from oil can
2 drops from oil can
Monthly
Shift Levers
Lithium Based Grease
Disassemble
Every Six Months
Freewheel
Brake Cables
Oil
Lithium Based Grease
2 squirts from oil can
Disassemble
Yearly
Bottom Bracket Pedals
Derailleur Cables
Wheel Bearings
Headset
Seat Post
Lithium Based Grease
Lithium Based Grease
Lithium Based Grease
Lithium Based Grease
Lithium Based Grease
Lithium Based Grease
Disassemble Disassemble
Disassemble Disassemble
Disassemble
Disassemble
Service Frequency
Frequency
Task
Before every ride
Be sure batteries are fully charged
Check tire pressure
Check brake operation
Check wheels for loose spokes
After every ride
Be sure to fully charge batteries
Quick wipe down with damp rag
Weekly
Lubrication
Monthly
Inspect wires / Inspect connectors
Check derailleur adjustment/Check brake adjustment Check brake
and gear cable adjustment
Check tire wear and pressure / Check wheels are true and spokes
tight Check hub, head set and crank bearings for looseness
Check pedals are tight / Check handlebars and stem are tight Check
seat and seat post are tight and comfortably adjusted Check frame
and fork for trueness
Lubrication
Perform safety check
Every six months
Lubrication
Check all points as per monthly service Check and replace brake
pads, if required
Check chain for excess play or wear
Yearly
Lubrication
Note: The frequency of maintenance should increase with use in wet
or dusty conditions. Do not over lubricate –remove excess lubricant
to prevent dirt build up. Never use a degreaser
10
Battery charging and maintenance
A well-maintained battery can perform well even after many kilometers of riding.
Please keep the battery 15 ℃to 40 ℃when the condition of charging. Do not store below/above - 20 ℃~ 50 ℃. Do not
store or charge the battery at temperatures outside the stated limits.
Please turn off the power and recharge the battery when the battery power indicator shows a low battery. Avoid draining
the battery completely; it will seriously affect the battery performance and life. Please turn off the ebike before charging.
At the time of charging first connect the charger to the battery then the charger points to the power unit before turning on
the power switch. After the charge is completed; switch off the power switch; disconnect the charger plug and then remove
the charger from the battery.
Please use the original charger, pay attention to the battery type, and the applicable voltage of the charger. Do not mix
chargers between bikes. When charging, the indicator light is red, and turns green when fully charged. When the battery is
full please unplug the charging head.
Please cover the charging point with the rubber cap after charging, otherwise it may cause battery damage.
Typically, a fully charged battery should retain charge for 120-180 days in Standby Mode. Remember to charge the battery
at least once every three months. Completely draining the battery outside this range may cause permanent damage to the
battery and void the warranty.
It is strictly forbidden to place the battery in acid and alkaline liquid, keep away from a source of heat and do not damage or
disassemble the battery. Do not insert metal objects into the charging port to avoid short-circuit.
If the battery or charging is abnormal, please contact the customer service or sales staff immediately.
Tabla de contenidos
Otros manuales de Bicicleta de moov8
