Moore Industries PSD Manual de usuario

PSD

PC-Programmable Loop Display

No. 178-717-00M

June 2018

Customer Support

Moore Industries is recognized as the industry leader in delivering top quality to its customers in products

and services. We perform a sequence of stringent quality assurance checks on every unit we ship. If any

Moore Industries product fails to perform up to rated specications, call us for help. Our highly skilled sta󰀨 of

trained technicians and engineers pride themselves on their ability to provide timely, accurate, and practical

answers to your process instrumentation questions. Our headquarters and other facilities phone numbers

are listed below.

There are several pieces of information that can be gathered before you call the factory that will help our

sta󰀨 get the answers you need in the shortest time possible. For fastest service, gather the complete model

and serial number(s) of the problem unit(s) and the job number of the original sale.

www.miinet.com

Demand Moore Reliability

Locations

World Headquarters Europe Australia

16650 Schoenborn Street

North Hills, California

91343-6196, U.S.A.

Tel: (818) 894-7111

Fax: (818) 891-2816

E-mail: [email protected]

TOLL FREE: 1-800-999-2900

www.miinet.com

1 Lloyds Court, Manor Royal, Crawley

W. Sussex RH10-9QU

United Kingdom

Tel: 01293 514488

Fax: 01293 536852

FREE PHONE: 0800 525107

[email protected]

www.miinet.com/uk

Sydney, NSW

3/1 Resolution Drive

Caringbah, New South Wales 2229

Australia

Tel: (02) 8536-7200

Fax: (02) 9525-7296

[email protected]

www.miinet.com/au

China Guido Gezellestraat 106

BE-2630 Aartselaar

Belgium

Tel: 03/448.10.18

Fax: 03/440.17.97

[email protected]

Dutch: www.miinet.com/dbe

French: www.miinet.com/fbe

Perth, WA

6/46 Angove Street

North Perth, Western Australia 6006

Australia

Tel: (08) 9228-4435

Fax: (08) 9228-4436

[email protected]

www.miinet.com/au

Room 402, No. 57,

Lane 651, Xipu Road,

Xinqiao Town, Songjiang District,

Shanghai, 201612, P. R. China

Tel: 86-21 62491499

Fax: 86-21 62490635

E-mail: [email protected]

www.miinet.com/cn

Burg Meslaan 98

4003 CD Tiel

The Netherlands

Tel: (0)344-617971

Fax: (0)344-615920

[email protected]

www.miinet.com/nl

www.miinet.com Moore Industries-International, Inc.

Table of Contents

Introduction ............................................................................................................................................. 5

The PSD .......................................................................................................................... 5

Model and Serial Numbers............................................................................................ 5

Speciﬁcations ................................................................................................. 5

Dimensions ..................................................................................................... 6

Conﬁguring the PSD ...................................................................................... 8

Installing the Conﬁguration Software .......................................................................... 8

Using the PC Program................................................................................................... 9

Connecting the PSD to PC........................................................................... 10

Necessary Equipment Table........................................................................................ 10

Square Roots and the Curve Generator ..................................................... 11

Programming the PSD ................................................................................. 13

Site-Viewing the Conﬁguration................................................................................... 14

Installation..................................................................................................... 14

Recommended Ground Wiring Practices................................................................... 14

Electrical Connections ................................................................................................ 14

CE Conformity .............................................................................................................. 15

Operation ...................................................................................................................... 15

Maintenance ................................................................................................................. 13

Intrinsic Safety.............................................................................................. 16

Installation in Hazardous Locations ........................................................... 18

Specific Conditions for Safe Use ................................................................. 19

Appendix - A PSD in

Safety Instrumented Systems

...................................... 21

Demand Moore Reliability 5

PSD

Input Accuracy:

±0.012% of input scale

Overall Accuracy: The

overall accuracy of the

unit is the input accuracy.

(±0.012% of input scale)

It includes the combined

effects of linearity, hys-

teresis, repeatability, and

adjustment resolution. It

does not include ambient

temperature effect.

Stability: Error is in % of

maximum span

Stability Input to Output

1yr 3yrs 5yrs

0.08 0.14 0.18

Resolution:

0.0028% of input scale

Over-Current

Protection:

100mA maximum

Input Overrange: 24mA

Digital Input Filter:

User-programmable;

50 or 60 Hz

Introduction

This is the user’s manual for the PSD, Moore

Industries’ PC-Programmable Loop Display. It

contains all of the information needed to conﬁgure,

install, operate and maintain the PSD.

The following guidelines are used in this manual:

WARNING - Hazardous procedure or condition that

could injure the operator.

Caution - Hazardous procedure or condition that could

damage or destroy the unit.

Note - Information that is helpful for a procedure, con-

dition or operation of the unit.

The PSD

The PSD is a 2-wire (loop-powered),

PC-programmable loop display. Typically paired

with one of our extensive line of durable housing

and enclosure options, its size, accuracy, and low

voltage drop make it the ideal solution for displaying

measurements in remote or otherwise difﬁcult-to-

access locations or nearly overburdened loops.

Model and Serial Numbers

Moore Industries uses the model and serial numbers of

our instruments to track information regarding each unit

that we sell and service. If a problem occurs with your

instrument, check for a tag afﬁxed to the unit listing these

numbers. Supply the Customer Support representative

with this information when calling.

Speciﬁcations

Excitation Current:

≥3.8mA

Burden: <2.3VLP

(<5.1VLP when –LMD

option is installed and the

PSD is disconnected from

the loop)

Type: LCD; Top Row,

10mm (0.4 inch) high

black digits on a reﬂective

background;

Bottom Row, 6mm

(0.23 inch) high black

digits on a reﬂective

background

Display Update Rate:

100msec

Format: Top row is ﬁve

alphanumeric characters

plus sign and decimal

point; Bottom row is ﬁve

alphanumeric

characters

Range:

-99999 to 99999

Minimum Display Span:

1.00

Operating Range:

-25°C to 85°C

(-13°F to 185°F)

Performance Performance

(Continued)

Display

Ambient

Conditions

Ambient

Conditions

(Continued)

Weight

Storage Range:

-45°C to 85°C

(-49°F to 185°F)

Relative Humidity:

0-95%, non-condensing

Ambient Temperature

Effect: ±0.015% of span

per °C change, maximum

RFI/EMI Immunity:

20 V/m when tested ac-

cording to SAMA 33.1 abc

with 0.5% of span or less

error; 20 V/m @

80-1000MHz, 1KHz AM,

when tested according to

IEC1000-4-3-1995

Common Mode

Rejection:

100dB @ 60Hz

Normal Mode

Rejection:

30dB @ 60Hz

BH housing:

1.37 kg (3 lbs, 1.1 oz)

D2LC housing:

640g (1 lb, 6.3 oz)

HP-style housing:

150g (5.3 oz)

Speciﬁcations and Information subject to change without notice.

6 Demand Moore Reliability

PSD

Ordering Information

Unit

PSD

PC-

Program-

mable

Loop

Display

Input

4-20MA

Loop

Input

Output

PRG

Program-

mable

with sup-

plied con-

guration

software

to display

a percent

or any

other EGU

up to 5

characters

in length.

Options

-LMD Loop

Maintenance Zener

Diode provided

at input terminals

allowing the PSD

to be removed from

the loop without

interrupting loop

continuity (Burden:

increases from <2.3

to <5.1VLP when

PSD is removed

from the loop)

-ISC: CSA

Approved

Intrinsically-Safe &

Non-Incendive

-ISE: ATEX

Approved

Intrinsically-Safe

-ISF: FM Approved

Intrinsically-Safe &

Non-Incendive

-VTD: Standard

Factory Calibration

with NIST Test Data

Report

Power

2.3VLP

Loop

Powered

Housings

BH2NG* (*) or (‡) Aluminum 2-Hub, Explosion-Proof enclosure with two,

½-inch NPT entry ports and a glass cover

BH2TG* (*) or (‡) Aluminum 2-Hub, Explosion-Proof enclosure with two,

¾-inch NPT entry ports and a glass cover

BH2MG* (*) or (‡) Aluminum 2-Hub, Explosion-Proof enclosure with two,

M20 x 1.5 entry ports and a glass cover

BH3NG* (*) or (‡) Aluminum 3-Hub, Explosion-Proof enclosure with three,

½-inch NPT entry ports and a glass cover

BH3TG* (*) or (‡) Aluminum 3-Hub, Explosion-Proof enclosure with two,

¾-inch NPT side-entry ports, one ½-inch NPT bottom-entry port, and a

glass cover

BH3MG* (*) or (‡) Aluminum 3-Hub, Explosion-Proof enclosure with two, M20

x 1.5 side-entry ports, one ½-inch bottom-entry port, and a glass cover

D1LC 1-Hub, Low base, Clear cover, NEMA 4X (IP66) enclosure

D2LC 2-Hub, Low base, Clear cover, NEMA 4X (IP66) enclosure

HP Hockey-puck housing and spring clips

DN Snap-in mounting for HP case on TS-32 DIN rail

FL Mounting anges on HP suitable for relay track or screw mounting

FLD Mounting anges on HP suitable for 3½” relay track or screw

mounting

SB2NG* (*) or (‡) 316 Stainless Steel 2-Hub, Explosion-Proof enclosure

with two, ½-inch NPT entry ports and a glass cover

SB2MG* (*) or (‡) 316 Stainless Steel 2-Hub, Explosion-Proof enclosure

with two, M20 x 1.5 entry ports and a glass cover

* Either Aor E su󰀩x (comes supplied with 2” pipe mount hardware)

A su󰀩x indicates ANZEx/TestSafe (Ex d)

Flameproof approvals (i.e. BH2MGA)

E su󰀩x indicates ATEX (Ex d and tb) Flameproof approvals

(i.e. BH2MGE)

‡ P su󰀩x indicates enclosure comes equipped with base plate and U-bolts

for mounting on a 2-inch pipe (i.e. BH2NGP)

See BH, SB and D-BOX Datasheets for additional information.

To order, specify: Unit / Input / Output / Power / Options [Housing]

Model Number Example: PSD / 4-20MA / PRG / 2.3VLP / -LMD [BH2NG]

Demand Moore Reliability 7

PSD

Figure 1. PSD Explosion-Proof BH Enclosure Dimensions

FRONT VIEW SIDE VIEW

61mm

(2.4 in)

83mm

(3.25 in)

62mm

(2.45 in)

64mm

(2.50 in)

66mm

(2.58 in)

76mm

(3.00 in)

43mm

(1.70 in)

18mm

(.70 in)

+IN -IN VIEW

PSD

602.78

MMETR

+IN -INVIEW

PSD

602.78

MMETR

Figure 2. PSD Hockey-Puck Dimensions

8 Demand Moore Reliability

PSD

84mm

(3.30 in)

118mm

(4.65 in)

130 mm

(5.12 in)

112mm

(4.40 in)

83mm

(3.25 in)

64mm

(2.50 in)

Interior Diameter

81mm (3.2 in)

Instrument

Tag

116 mm

(4.56 in)

27mm

(1.05 in)

Conduit

Fitting

Cover

Body

Bezel

Figure 3. Field-Mount, NEMA 4X/IP66 D-BOX Enclosure Dimensions

Demand Moore Reliability 9

PSD

Installing the Conﬁguration

Software

Refer to Table 1 for the equipment needed.

1. Insert the Moore Industries Interface Solution

PC Conﬁguration Software CD into the CD

drive of the PC. Access the CD and open the

PSD SPD PC Conﬁguration Software folder.

2. Double-click the installation program located

in the folder. Follow the prompts to correctly

install the program.

Once the Conﬁguration Program is installed on the

PC, the PSD can be connected to the loop or to

equipment to simulate and calibrate input. You can

then view and/or change the instrument’s parameters.

No PSD Required

It is not necessary to connect the display to a PC while

creating conﬁguration ﬁles using the Conﬁguration

Software. The Conﬁguration Program can be run

without connecting a PSD, and most operating

parameters can be set without beneﬁt of an attached

unit.

This makes it easy to create a set of operating

parameters, save and download them to one or more

transmitters at a later time.

The PSD must be connected to the PC in order to:

capture input, assign a tag, receive (via download) a

conﬁguration ﬁle and save the conﬁguration ﬁle from

the instrument’s memory.

Conﬁguring the PSD

One of the beneﬁts of the PSD is that it has no internal

or external controls to adjust or settings to change. All

operating parameters are set using Moore

Industries’ Intelligent PC Conﬁguration software.

Once these software settings are made, they are

downloaded to the instrument in the form of a

Conﬁguration File and stored in the unit’s non-volatile

memory. You can choose to save a backup copy of

the ﬁle on your PC hard drive or other external media.

The transmitter communicates with the PC through

a cable connection to the PC’s serial (COM) port or

optional USB cable.

The serial cable is P/N 803-040-26 and the USB cable

is P/N 804-030-26.

Default/Factory Conﬁgurations

The following are the default factory settings for your

unit:

Input:

- 4-20mA

- Filter: 60Hz

- Damping Time: 0.0

Display:

- 0-100 PCT

- Display Resolution: AUTO

- Linearization Mode: Normal

10 Demand Moore Reliability

PSD

Using the PC Program

The PSD PC Conﬁguration Software is used to

program all of the PSD’s parameters. The PC

Software is made up of these sections:

1. Arrow Buttons–Three Arrows here are used for

Downloading to Unit (down Arrow), Uploading from

Unit (Up Arrow),or Get Set-up (Right Arrow).

Note:

After uploading ﬁle (by pressing the Up Arrow), you

must press the Right Arrow button to populate all

information into the conﬁguration dialog area.

2. Status–This portion of the screen displays the

activity of the connected unit. It will show you if the

unit is Idle, Uploading, Downloading, or Monitoring.

3. Process Variables–This displays two variables: the

loop signal in mA and the loop signal after the PSD

has converted it to the designated EGU.

4. Input Settings, Output Setings, Tag, and Device–

These three sections display the conﬁguration of the

connected PSD.

Figure 4. Most of the PSD Operating Parameters can be set from the Main Screen of the Conﬁguration Program.

5. Connection–Check this section to track the status

of the PC’s connection with the PSD.

6. Input/Output & Custom Curve Tabs–Displays all

the information to program the PSD with either a

standard, linear curve (Input / Output), or with a

custom linearization curve (Custom Curve).

6. Input Conﬁguration–Displays the input settings

proposed for the transmitter. The two different capture

buttons permit you to capture the input span.

7. Display Conﬁguration–Shows the display settings

proposed for the PSD.

8. Engineering Units (EGU), Linearization Mode,

Filter, Display Resolution, and Damping Time–This

set of radio buttons and edit boxes allow you to input

different

values proposed for transmission to the PSD.

Tabla de contenidos

Otros manuales de Monitor de Moore Industries

Moore Industries

Moore Industries SPD Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación