Montarbo FiveO P6AM Manual de usuario

P6AM

FIVE CHANNEL FX MIXER

EN OWNER’S MANUAL

Owner’s manual | P6AM

P6AM

INTRODUCTION

First of all, thank you for choosing a product FiveO Montarbo®. The P6AM have been designed to provide a cost effective

high grade solution while maintaining high quality cabinet construction and optimum components. The P6AM, depending

on the model, can be used for all types of applications including, but not limited to, churches, conference centers and

discos. It will provide excellent performance rivalling those cabinets costing much more. Our professional audio products are

designed and tested by a highly qualiﬁed engineering team with more than 20 years of experience. Great pride and care is

placed in delivering products with excellent performance, speciﬁcations and dependable reliability. Also great emphasis is

placed in creating and bringing to market products that can ﬁll multiple applications and also for customers exceptional

values.

For further information about your P6AM, please check our website www.montarbo.com

FEATURES

- 2-Way 6.5” vented active speaker cabinet;

- Class D 70 W x 2;

- 6.5” (165 mm) woofer/1” voice coil;

- 1” neodymium tweeter;

- Trapezoidal painted wood cabinet and metal grille;

- 4 x M4 standard (2 x vertical and horizontal side);

- Modern design and lightweight.

The following features are for P6AM mixer only:

- 2-band equalizer on input channels;

- 5 input channels with individual volume control;

- 3 bands master EQ;

- 4 COMBO microphone inputs with phantom power (+15V);

- 1 RCA line inputs/3.5 mm jack;

- 1 RCA line outputs;

- Monitor output with level control;

- Powered output 70 W (@4 ohms, min) for optional external speakers;

- 16-effects;

- USB Player.

P6AM | Owner’s manual

P6AM

CONTENTS

Introduction 2

Features 2

Contents 3

Important Safety Instructions 4

Description 6

Control Element 6

Control Element - Rear Panel 8

Control Element - USB Player 9

Connection Diagram 10

Frequency Response Diagram 11

Block Diagram 12

Effects List 13

Wire Connections 14

Technical Speciﬁcations 15

PACKAGE CONTENTS P6AM - Code 5O01346

P6AM

Owner’s manual

Warranty certiﬁcate

Owner’s manual | P6AM

P6AM

IMPORTANT SAFETY INSTRUCTIONS

The symbol, wherever used, alerts you to important

operating and maintenance. Please read.

Protective grounding terminal.

The symbol, wherever used, alerts you to the res-

ence of un-insulated and dangerous voltages in the

product enclosure. There are voltages that may be

sufﬁcient to constitute the risk of electirc shock or

death.

Alternating current/voltage.

Hazardous live terminal.

ON Denotes the product turned on.

OFF Denotes the product turned off.

Documentation for safety reasons:

TO REDUCE THE RISK OF ELECTRIC SHOCK PLEASE DO NOT

REMOVE THE COVER OR THE BACK PANEL OF THIS EQUIPMENT.

THERE ARE NO PARTS NEEDED BY USER INSIDE THE

EQUIPMENT, FOR SERVICE, PLEASE CONTACT QUALIFIED

SERVICE CENTERS.

CAUTION

Describes precautions that should be observed to prevent

damage to the product.

1. Read this manual carefully before operation.

2. Keep this manual in a safe place.

3. Be aware of all warnings reported with this symbol.

4. Keep this equipment away from water and moisture.

5. Clean it only with a dry doth.

Do not use solvent or other chemicals.

6. Do not damp or cover any cooling opening. Install the

equipment only in accordance with the manufacturer’s

instructions.

7. Power cords are designed for your safety. Do not remove

ground connections! If the plug does not ﬁt your AC out-

let, seek advice from a qualiﬁed electrician. Protect the

power cord and plug from any physical stress to avoid

risk of electric shock. Do not place heavy objects on the

power. This could cause electric shock or ﬁre.

8. Unplug this equipment when unused for long periods of

time or during a storm.

9. Refer all service to qualiﬁed service personnel only. Do

not perform any servicing other than instructions con-

tained within the User’s Manual.

10.

To prevent ﬁre and damage to the product, use only the

recommended fuse type as indicated in this manual. Do

not short-circuit the fuse holder.

P6AM | Owner’s manual

P6AM

Dispose of this product should not be placed in mu-

nicipal waste and should be separate collection.

WARNING

TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE,

DO NOT EXPOSE THIS EQUIPMENT TO MOISTURE OR RAIN.

Before replacing the fuse, make sure that the product is OFF

and disconnected from the AC outlet

11.

Move this equipment only with a cart,

stand, tripod or bracket speciﬁed by the

manufacturer, or sold with the equipment.

When a cart is used, use caution when

moving the cart/equipment combination

to avoid possible injury from tip-over.

12.

Permanent hearing loss may be caused by exposure to

extremely high noise levels.

The US Government’s Occupational Safety and Health

Administration (OSHA) has speciﬁed the permissible ex-

posure to noise level.

These are shown in the following chart.

According to OSHA, an exposure to high SPL in excess

of this limits may result in the loss of heat. To avoid the

potential damage of heat, it is recommended that person-

nel exposed to equipment capable of generating high SPL

use hearing protection while such equipment is under

operation.

The apparatus shall be connected to a mains socket out-

let with a protective earthing connection.

The mains plug or an appliance coupler is used as the

disconnect device, the disconnect device shall remain

readily operable.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

CONNECT THE LOUDSPEAKER TO A POWER OUTLET

WHILE THE GRILLE IS REMOVED.

IMPORTANT SAFETY INSTRUCTIONS

Owner’s manual | P6AM

P6AM

DESCRIPTION

CONTROL ELEMENT

THE MONO INPUT CHANNELS

These are marked CH1 to CH4 and include a balanced COMBO socket (MIC IN). Use the COMBO socket to connect a low

impedance balanced dynamic microphone or a low level signal.

You can also connect a condenser microphone into the COMBO socket.

PHANTOM POWER SWITCH

When the (2) switch is at ON position, a +15V phantom power will be applied to CH1 through CH4.

Only Condenser microphones need Phantom Power, so switch it OFF when you use dynamic microphones.

TAPE IN/3.5mm JACK

Here you can connect a stereo Line Level via RCA sockets. Usually this stereo channel will be used to connect into

the P6AM with the audio output of a Computer, or a CD Player, iPOD, MP3 player, etc.

TAPE OUT

Via these two RCA sockets you can route out the Main Stereo signal usually to a Recorder Device.

LEVEL CONTROL

It adjusts the LEVEL of individual channels with a range from -∞ to +10 dB.

19 1817

1315

12 11

431

57 6

P6AM | Owner’s manual

P6AM

DSP/FX-AUX

This control is used to adjust the level of respective channel signal sent to the Aux Bus. The conﬁguration is post-

fader so the signal sent to AUX Bus will be affected by the LEVEL control of that particular channel. In this typical

compact unit, the channel signal is not only assigned to external effect or processor equipment directly but also to

internal digital multieffect.

CHANNEL EQ

Each Input channel has its own 2-band equalizer with an adjustable range of +/-15 dB.

The HIGH control creates a shelving ﬁlter that will boost/cut all the frequencies above 12 kHz.

You can use it to eliminate high frequency noise and hiss (such as those produced by Tape Recorders) or to boost and

make crispier the cymbals or certain harmonics of the human voice.

The LOW control will create a shelving ﬁlter that will boost/cut frequencies below 80 Hz.

Use the LOW control to put in evidence Kick Drum or enhance male voice.

THREE BANDS MASTER EQ

This equalization circuit is inserted before the MAIN level control. You have available 3 controls: BASS, MIDDLE and

HIGH.

HIGH

Use it as a further boost to the overall MIX to get more colour from your program or turn the control down if you want

to avoid high frequency noise.

MIDDLE

This is a unique control designed for a wide variation of middle frequencies.

Turn the control down (from center position) and you will make the human voice more warm and smooth while turning

the control up will enhance vocal intelligibility. Be careful not to boost these frequencies too much to avoid feed back

on microphone inputs.

BASS

Turn the control down (from center position) if you experience rumble or low frequency noise or turn it up to make the

P6AM sound much bigger than what it is.

MONITOR OUT

Connect a powered Monitor to this socket or an external Ampliﬁer+Monitor Speaker. You can also use it to connect a

pair of Headphones.

MAIN POWER OUT

You can connect a pair of passive speakers to these Output sockets. The 70 Watt (@ 4 ohms,min) internal ampliﬁer

signal will be assigned to these sockets.

Note: in case to connect two passive speaker cabinets, it must be sure that load of each speaker cabinet is at least

8 ohms.

MAIN

There is the Main Mix Control adjusting the overall volume assigned to the 2 internalspeakers or to the MAIN POWER

OUT speakers.

MAIN LED METER

This 4 segments LED Meter will monitor the volume assigned by MAIN level control. If the +10 LED ﬂashes, you have

reached limit of the internal 70+70W ampliﬁer and the outgoing signal is approaching distortion. +10 LED should

ﬂash only occasionally. If no LED is blinking, it means that the output level is too low, so either you do not hear any

music or the signal is too low to the noise level. For optimal functioning LEDs marked -10 and 0 should always be

blinking.

Owner’s manual | P6AM

P6AM

CONTROL ELEMENT

MONITOR

Via this Control, you can adjust the signal Level applied to MONITOR OUT sockets.

POWER LED

This LED will blink when your P6AM is switched ON.

PRESETS

Adjust this knob to select the desired effect.

AUX/DFX RET

This control is used to adjust the level of the signal coming from internal multi-effect.

DSP MUTE

This switch is used to activate/deactivate the resident multi-effect.

PEAK LED

This LED lights up when the input signal is too strong. In case of the digital effect module being muted, this LED

also lights up.

CONTROL ELEMENT

POWER ON/OFF

This switch is used to turn the main power ON/OFF.

AC POWER SOCKET WITH MAIN FUSE

22 21

REAR PANEL

P6AM | Owner’s manual

P6AM

CONTROL ELEMENT

USB PLAYER

cdefg

Insert a standard microSD card.

Insert USB drive.

Aux Input.

Play the last song or decrease the volume after pressing 2 seconds.

Press this key to start playing or Press this key to pause.

Play the next song or increase the volume after pressing 2 seconds.

PLAY MODE

In the opening or playing state, press this key to select the three circling modes in order:

Line: The player plays the ﬁles you input. The mark on the screen is “LINE”.

Bluetooth: The player plays the ﬁles from your bluetooth device. The mark on the screen is “bt”, in this state, you

will hear a tone from the loudspeaker.

From your Bluetooth device’s settings page, enable Bluetooth and select “VIRE BT” as the device.

USB: The player plays the ﬁles in a standard USB drive. The mark on the screen is “USB”.

Display the status of USB playing.

Owner’s manual | P6AM

P6AM

CONNECTION DIAGRAM

This will be typical setting for a Business Presentation making use of Power Point slides and background music/effects

generated by CD player, iPOD or other sources such as Mp3 Players. The Presenter has up to 2 micro-phones available

and a wireless microphone can also be connected for the use of the audience. The entire presentation can be recorded

through a recorder device.

In this case up to three Musicians (Vocalist, Guitar Player & Keyboard Player) can hookup to the P6AM and an additional

Drum Machine can also be connected to the Stereo Channel.

One or two external passive speakers can be connected (the internal speakers will not be affected) as well as a powered

stage Monitor.

Note: load of single passive speaker must be no less than 4 ohms. In case to connect two passive speaker cabinets, it

must be sure that load of each speaker cabinet is at least 8 ohms.

MIC

iPOD - CD PLAYER - MP3 LAPTOP COMPUTER TAPE RECORDER

HEADPHONE

MIC

DAT RECORDER DRUM MACHINE

PASSIVE SPEAKERS

POWERED STAGE MONITOR

Tabla de contenidos

Otros manuales de Sistema de altavoces de Montarbo

Montarbo

Montarbo FiveO V-MATE 10A Manual de usuario

Montarbo

Montarbo W17P Manual de usuario

Montarbo

Montarbo PALCO PLUS Manual de usuario

Montarbo

Montarbo FiveO V-MATE 10A Manual de usuario

Montarbo

Montarbo F15 CXA Manual de usuario

Montarbo

Montarbo TANK241P Manual de usuario

Montarbo

Montarbo W14A Manual de usuario

Montarbo

Montarbo isoBOX Manual de usuario

Montarbo

Montarbo MT180A Manual de usuario

Montarbo

Montarbo W440P Manual de usuario

Montarbo

Montarbo T10A Manual de usuario

Montarbo

Montarbo W28As Manual de usuario

Montarbo

Montarbo W440P Manual de usuario

Montarbo

Montarbo DTRIX15 Manual de usuario

Montarbo

Montarbo W400A Manual de usuario

Montarbo

Montarbo W18As Manual de usuario

Montarbo

Montarbo W20A Manual de usuario

Montarbo

Montarbo NM250A Manual de usuario

Montarbo

Montarbo W18A Manual de usuario

Montarbo

Montarbo MT 180 A Manual de usuario

Montarbo

Montarbo MT200P Manual de usuario

Montarbo

Montarbo wide series Manual de usuario

Montarbo

Montarbo T10P Manual de usuario

Montarbo

Montarbo B Series Manual de usuario

Manuales populares de Sistema de altavoces de otras marcas

JVC

JVC CA-MXK5R Manual de usuario

LG NB4532B Manual de usuario

JVC

JVC CA-FSH100 Manual de usuario

5Core

5Core Pro Series Manual de usuario

EAW

EAW MQV1394e Manual de usuario

Lynx

Lynx GXR-LA10A Manual de usuario

iLive

iLive ITB066B Manual de usuario

RDX

RDX QuickStation 4 Manual de usuario

Electro-Voice

Electro-Voice S-122 Manual de usuario

Sven

Sven SPS-619 GOLD Manual de usuario

Pioneer

Pioneer CS-7070 Manual de usuario

EAW

EAW UB82e Manual de usuario

Sondpex

Sondpex Active Speaker System and Digital Music... Manual de usuario

JVC

JVC NX-PN7 Manual de usuario

Marshall Amplification

Marshall Amplification AR-DM61-BT Manual de usuario

Yamaha

Yamaha NX-A01 - Speaker Sys Manual de usuario

SE Audiotechnik

SE Audiotechnik I-LINE Manual de usuario

Gemini

Gemini WRX-843 Series Manual de usuario