MONSTERPRO S506 Manual de usuario
S506 26” Electric Bicycle
©2019 MONSTERPRO 1
MONSTERPRO
MONSTERPRO S506 (Disc Brakes)
26” Electric Bike
User Manual
[Revision 2.0 June 2019]
READ THIS MANUAL CAREFULLY BEFORE USE –FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY VOID
WARRANTY.
KEEP THIS MANUAL FOR FUTURE REFERENCE.
PRODUCTS COVERED BY THIS MANUAL MAY VARY IN APPEARANCE, ASSEMBLY, INCLUSIONS, SPECIFICATIONS, DESCRIPTION
AND PACKAGING.
S506 26” Electric Bicycle
©2019 MONSTERPRO 2
Safety
•Riding can be a hazardous activity. Certain conditions may cause the equipment to fail without
fault of the manufacturer. The product can and is intended to move, and it is therefore possible to
lose control, fall-off and/or get into dangerous situations that no amount of care, instruction or
expertise can eliminate. If such things occur, you can be seriously injured or die, even when using
safety equipment and other precautions. RIDE AT YOUR OWN RISK AND USE COMMON-SENSE.
FAILURE TO USE COMMON- SENSE AND HEED ALL SAFETY WARNINGS AND
RECOMMENDATIONS INCREASES RISK OF INJURY. USE THE PRODUCT ONLY WITH
APPROPRIATE CAUTION AND SERIOUS ATTENTION TO SAFE OPERATION.
•Before riding on the road, take time riding in an enclosed area to familiarise yourself with
the controls and behaviours of an electrically assisted bicycle. Try all settings so you are
familiar with the results.
•Before every ride, check bicycle condition and ensure that no fasteners are loose,
particularly axles, pedals, seat and handlebars. Ensure that the tyres are inflated to within
specification (printed on the tyre sidewall), and that the brakes are operating correctly.
•Maximum load capacity = 120kg.
•Understand and obey any local laws or regulations which may affect locations where the product
may be used. Ride defensively.
•This product is manufactured for performance and durability but is not impervious to damage.
Stunts or other aggressive riding can over-stress and damage the product, and the rider assumes
all risks associated with how the product is looked after.
•Keep fingers and other body parts away from moving components.
•Always wear suitable protective equipment, such as an approved safety helmet (with chin strap
securely buckled). A helmet may be legally required by local law or regulation in your area. Wear
suitable footwear for bicycle riding and clothing that helps make you visible to others.
Battery and Charging
•Never modify the electrical system. Alterations could cause a fire resulting in serious injury and
could also damage the electrical system.
•Charge with the supplied or recommended charger only. Use of the wrong charger could cause a
fire or explosion resulting in serious injury.
•Ensure the voltage and frequency of the charger is compatible with mains electrical supply.
•Use the battery charger in dry locations only.
•Regularly check the charger for damage to the electrical cord, plug, enclosure and other parts. If
any damage or malfunction occurs, do NOT use the charger until repaired or replaced.
•Use caution when charging.
•Do not operate the charger or charge batteries near flammable materials.
•Do not clean or perform any maintenance on the product when it is being charged.
S506 26” Electric Bicycle
©2019 MONSTERPRO 3
Introduction
Congratulations on purchasing a MONSTEPRO pedal assisted bicycle. We hope you enjoy years of
satisfactory and safe riding.
Read the manual
This manual is provided to help you to get the best performance, comfort, enjoyment and safety from
your bicycle. The manual describes specific care and maintenance procedures that help protect your
warranty and ensure trouble-free use. Please pay attention to the section on battery charging and
maintenance.
Read the manual before assembling and riding your bicycle.
Note that the manual is not intended to be an extensive reference source for servicing, maintenance
and/or repairs. For additional assistance, contact an authorised MONSTERPRO service centre.
In the interests of your safety and the safety of others, it is highly recommended to have your bicycle
assembled and serviced / adjusted by a skilled bicycle mechanic.
S506 26” Electric Bicycle
©2019 MONSTERPRO 4
Parts Identification and Assembly
Tools Required for Assembly
The bicycle may come supplied with some tools. You may require some other tools which
not included.
Assembly
The bicycle comes with some minor assembly required, and may include some necessary tools.
Handlebars
No.
Name
1
Bicycle Assembly (Frame, Forks, Handlebar,
7
Spanners & Allen keys Set
Crank, Chain, Battery, Motor, Rear Wheel etc)
2
Front Wheel with disc rotor installed
3
Front Mudguard
4
Rear Seat Rack
5
Battery Charger Set
6
Seat & Post
S506 26” Electric Bicycle
©2019 MONSTERPRO 5
Carefully place the bicycle assembly on a flat surface so that it rests on the front fork and rear wheel.
Place and slide the handlebar assembly centrally into position in the clamp, rotate the handlebar
assembly, as required, so it is aligned "square" to the front fork. That is, the handlebar will be at 90° to the
bicycle frame when the front wheel is straight.
Using an Allen key and torque wrench, tighten the screws to the torque.
S506 26” Electric Bicycle
©2019 MONSTERPRO 6
Front Wheel & Disc Brake
The front disc rotor has been installed on the front wheel by manufacture. Install the wheel by positioning
the rotor between the brake pads and fixing the wheel in the dropouts.
If your bicycle has tabbed lock washers, ensure that the locking tabs are correctly mounted into the holes
in the forks.
Fully tighten both nuts and ensure the wheel sits straight in the forks.
S506 26” Electric Bicycle
©2019 MONSTERPRO 7
Front Mudguard & Headlight
Attach the mudguard and headlight’s mount stay to the lower of the twin fork blade mounts, using both a
small and large washer centre the guard and, tighten from the hex key end.
During tightening, recheck for centring and possibly raise or lower the guard.
Seat Post
Loosen the clamp and insert the seat post into the frame.
There is a minimum insertion marked on the seat post. This must be situated below the seat post clamp
when riding to avoid accidents and damage.
Slide the seat post down until it is to the desired height for riding.
Tight the clamp and make sure the post is un-moveable.
S506 26” Electric Bicycle
©2019 MONSTERPRO 8
Rear Rack
Attach rack to the bike then screw the mounting points.
S506 26” Electric Bicycle
©2019 MONSTERPRO 9
Operation
Before riding, ensure that all required fasteners are tightened to the correct torque and charge the battery
prior to use.
Always wear a helmet and appropriate safety equipment and always keep both hands on the handlebars
and both feet on the pedals whilst riding. Read, understand and follow all safety recommendations before
riding. Avoid riding in damp conditions, rain etc as this may affect operation or possibly damage the
bicycle electronics.
No.
Name
No.
Name
1
Frame
10
Rear Rack
2
Front Wheel
11
Rear Light
3
Rear Wheel and Drive Motor
12
Head Light
4
Seat Post / Seat
13
LCD Display
5
Pedal
14
Gear Change
6
Chain
15
Brake Lever
7
Crank Assembly
16
Front Fork
8
Handlebar
17
Rear Derailleur
9
Battery Pack
18
Chain Wheel
S506 26” Electric Bicycle
©2019 MONSTERPRO 10
Presentation of LCD Screen
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Scooter de MONSTERPRO
