Monka mcHF Manual de usuario
第1页
Release Note
Ver1.02： Initial Release …2015/8/1
Ver1.03: 正其他日期格式输入校验错误 …2015/9/4
修正 CW 左右浆反置无效错误
修正宏发射过程中 转动 B2 显示会错乱问题。
修正宏录制过程中退格删除跨两行后显示错误 添加宏录制剩余字符数显示
添加轻按 B1 转旋可选宏(选中可预览内容 顶行显示对方呼号)松开 B1 调用该宏.
添加发射状态轻按 B2 取消发射。接收状态轻按 B2 为开关对方呼号捕捉。
添加 TU E 调谐功能 Pause/Break 键。
添加 ALT+TAB 为第二发射热键 原 I SERT 为发射热键
添加免键盘调用宏的数量由 M1~7 到 M0~M9 所有宏
***添加语音录音和回放功能, 回放时可暂停 快进 快退。录音仅录接收的语音。
回放时：1.不可录音(关闭目前录音) 2.不可发射 3.不可调用宏 4.不可进 CO FIG 菜单
<功能键尽量集中于 B2 不使用主控 B1 按钮, 除了快进快退>
回放状态：短按 B2(空格): 暂停/播放 长按 B2(ESC): 退出回放
接收状态：短按 B1 转义命令\ 长按 B1(TAB) CO FIG 配置
短按 B2(CTRL+C):开关呼号捕捉 长按 B2(CTRL+V) :开始/暂停录音
双击 B1 未定义 双击 B2 未定义
发射状态；短按 B2(I SERT 或ALT+TAB): 取消发射 长按 B2：未定义
( 快进快退使用键盘 Ctrl+ ↑↓← → 箭头操作快进快退 )
注：在 回放暂停 状态 转动编码器可以实现大小步进的快进快退 ( 按住
B1
为大步进 )
V1.04A:
1. USB disk is supported on "Import/Export Config" Menu,
USB disk has priority over microsd card inside MODEM. when USB disk is inserted,
config.txt file is automatically saved/loaded to or from USB disk, while OT sd card as usual.
2. "Connect to PC" Menu is added, when choosing this item, MODEM itself is simulated to a
USB disk, connecting via USB cable accessory,
there will be read/write all files inside MODEM as easy as normal USB disk.
ote: when USB disk is inserted, there is a tiny "U" symbol near the "SD" in the top line.
=========================================================================
Press B1 and rotate encoder can play macro without support of keyboard.
Press B2 while TX cancel the emitting.
ALT+TAB can also switch RX/TX,
Replay mode: Press B2 for pause(SPACE) long press B2 exit replay mode(ESC)
RX: Press B1 for Escape control long press B1 for configuration(TAB)
Press B2 for callsign capture(CTRL+C)
long press B2 for voice recording(CTRL+V)
TX: Press B2 cancelling TX(INSERT or ALT+TAB)
Ctrl+ ↑↓← → can backward and forward while re lay voice record .
B1 + Rotate encoder/ Rotate encoder do same functions while ause in re lay mode.
*Thanks： BD6RN, BG8ON BH4LGE and some friends here.
第2页
Contents
1.Introduction......................................................................................................................................5
2.Battery replacement..........................................................................................................................7
3.Digital Mode operations...................................................................................................................9
4.1 Receiving...............................................................................................................................9
4.2 Transmitting..........................................................................................................................9
3.3Practical use..........................................................................................................................10
3.4Macro....................................................................................................................................11
4.5 Import & Export configuration...........................................................................................13
4.CW Mode.......................................................................................................................................13
5.Upgrade firmware..........................................................................................................................16
Appendix 1. Configure Menu...........................................................................................................18
Appendix 2. Keyboard hotkey..........................................................................................................18
Appendix 2. Op Manual...................................................................................................................19
Appendix 4. CW Escape...................................................................................................................21
Appendix 5. Data cable.....................................................................................................................23
第3页
Parameter List
Modem Size： 160 X 65 X 27 MM
Charge Volt： 5~16V (3.5MM DC)
Internal battery: AAx2 OR 4.2v Lith. (inner battery volt<5v)
AA AA+TRX Lith lith+TRX
Battery life
Weight
Note: AAx2: Panasonic 2550mah Lith: 3100mah
2.2v 2.6v 3.0v 3.4v 3.8v 4.2v
Current
1
Current
2
注：Current1: Without internal TRX Mod installed
Current2：With internal TRX Mod installed
TRX Mod(OPT) :internal transreceiver mod.(Coming soon)
Accessories list
USB Cable DC Charge cable
Radio data cable Digital modem
第4页
1.Introduction
Digital Modem can encode/decode BPSK31/63, RTTY,
PSK and CW modes without PC, specially for portable
digital communication 。 With its internal high performance
DSP chips can process radio data。Internal SD card can save
the regular Logs and real time audio data(Including FFT data).
Its external USB host interface can be used for a USB
Keyboard 。 This modem use 12864 standards screen for
display, and AAs(or 4.2v lithium battery) for power.
Furthermore, this modem can freely download firmware to
upgrade new features.
Press B1+B2 1-2S is power ON/OFF
Cautions:
1. DO NOT Enable “Force charge” when using AA
battery。
2. Modem can not charge lithium battery when
volt<3.35v. Choose “force charge”.
3. Mo em begins charge when it turns on(ju ge
battery type by volt), power off automatically when
complete。
第5页
4. Screws in top are slightly different in size with others,
DO NOT mix it。
Overall Architecture
Internal pictures
第6页
Wire connection
Connecting Modem and your radio by Data cable。If
used for DIY radios, just connect 4 pins to MODEM: 1.GND,
2.PTT 3. Au io out 4. Au io in. Take reference of following
pictures.
Data cable
USB cable
Keyboard
DIGI MODEM Interface defines：
<< Modem pin defines
<Radio sides pins defines reference to related manual>
Normally, you should provide your radio model to us, for
supply of related data cable。
2.Battery re lacement
Battery replacement is no necessary for lithium. Only
needs to be recharged by DC cable, when system beeps(volt
< 3.5). Extern volt between 5 to 26V can be used for charging.
第7页
(Higher volt lower current is required)
DO NOT reverse battery polarity ， DO NOT charge
AAs。
Diagram of Battery replacement：
Screw down three of them in both sizes。
=====================================
AA battery is better for outdoor use。
Lithium battery is long life for use. But will lose its capacity
for long keeping. Both of them effect by low temperature
AAs is advised for occasionally use.
Lithium is recommended for regular use.
第8页
3.Digital Mode o erations
4.1 Receiving
Firstly, ensure your wire connection is all right 。 Turn on
power of digital modem（Press
B1+B2 for 1~2s
），If there is
FFT spectrum display. Congratulations, Receiving is OK。Easy
work,
(Some ra io nee s to turn OFF SQL)
Set the appropriate MODE(see Appendix
1.<Mode>),Then adjust the cursor to the peak, Decoding
message will shows。
Spectrum isplay Signal peak & Deco ing text
4.2 Transmitting
First, please make sure Radio station is connected with
ANT or dummy load for TX。Then, Check the radio pwr meter
if there is any power output, after press Insert for
transmitting. If does, Nice work, Modem could output
normally.
第9页
3.3 Practical use
First find the data communications sound on radio, and
align with the cursor on the crest range of about 2 grids, the
machine will automatically lock and calibration signal. If the
mode is no error, the decoded information will soon appear
at the bottom of the screen.
Press Insert, MODEM turned to TX status, radio controlled
into the transmit mode. Now you can enter the text you want
to transmit, that is emitted content. If the input error, use
backspace key in a non-CW mode (The receiver side will get a
backspace flag and delete one word correspondingly). Press
Insert again after transmits complete return to the receiving
state, thus completing the launch.
第10 页
Otros manuales para mcHF
1
Tabla de contenidos
Otros manuales de Transceptor de Monka
