Momax smart SL6S Manual de usuario
Smart Sensor
IoT Temperature & Humidity Sensor
SL6S
INSTRUCTION MANUAL
IoT 智能溫濕度感應器
使用說明 / 使用說明
IoT 智能溫濕度感應器
N
Product Information p.2 - 8
產品資料 p.9 - 15
產品資料 p.16 - 22
1
IoT Temperature & Humidity Sensor (SL6S)
This IoT temperature and humidity sensor senses the environment’s
temperature and humidity info. And will pass these info back to gateway
through Zigbee 3.0 protocol for further home automation actions.
Introduction Adding Sub-Device
This Temperature and Humidity Sensor must be worked together with
MOMAX Multi-function Gateway.
Before start, please open the Temperature and Humidity Sensor back
cover. Please check battery is properly installed. Press the reset button for
30 seconds to initiate the pairing process.
Find “SL6S” in MOMAX’s channel
helpdesk.momaxsmart.com
Get step-by-step setup and support.
Watch the latest video tutorial to learn to setup and operate your SL6S.
Keep up to date with the latest updates. After the gateway is successfully added,
enter the gateway page in MOMAX
Smart APP. Click “Add” to start the
pairing process, select Temperature and
Humidity Sensor follow the prompts.
2 3
Product Overview
1. Wireless signal
2. Temperature
3. Humidity
4. Power
5. Vent
6. Button
7. Battery slot
8. Bracket
9. Clasp position
1
2
3
4
55
6
7
8
9
Comfortable Temperature And Relative Humidity Range
Relative Humidity
Temperature
Temperature/Relative Humidity comfortable range figure
(Refer to ASHRAE 55 standard)
Summer comfortable range
Winter comfortable range
4 5
Points for attention
Before using, please read this user manual carefully and keep it for future
reference.
1. Do not dismantle or modify the product.
2. Do not store the product in wet conditions.
3. Do not keep or use the product near heat sources.
4. Please only connect the product with the adaptor provided.
Warnings
Please reference Mobile Apps content: Before accepting the Agreement,
you are supposed to thoroughly read all the contents of the Agreement,
and fully understand its terms, especially restrictive clauses or exceptions
and Privacy Notice. Restrictive clauses or exceptions are bold or
highlighted in other forms to catch your attention. In case of any doubt
about the terms of the Agreement, please contact the relevant business
department of Tuya. You are not allowed to use the service before
you have read and accepted all the terms of the Agreement, relevant
agreements, and rules, etc. Once you select “agree and submit the
Agreement” (see registration page for detailed wordings) and complete
the registration procedure, or you use the service in any form, it will be
deemed that you have read and agreed with the restriction of the
Agreement and rules above. In case of any breach of the Agreement,
Tuya has the right to unilaterally restrict, suspend or terminate the service
for you, and has the right to investigate your relevant responsibilities.
Service Agreement of
Smart Mobile Application Platform
Specification
Model No. : SL6S
Working voltage : 3VDC CR2450
Quiescent current : <35µA
Working Temperature : -10~ 55
Working Humidity : <95% RH
Wireless frequency : 2.4000GHz - 2.4835GHz
Communication Protocol : Zigbee 3.0 protocol between gateway and
sub-devices
Working current : <20mA
Wireless distance : Zigbee 150m (no obstacles)
Battery Life : 1 year (30 triggers per day)
Material : PC+ABS
Size : 61.8 x 60 x 13.5 mm
(not including stand bracket)
Weight : 49g (not including battery)
* This device must be used together with MOMAX Smart Multi-function
gateway.
# Recommended for use with MOMAX Smart products.
Contains
1. Smart Sensor IoT Temperature & Humidity Sensor
2. CR2450 battery
3. Stand bracket
4. Instruction Manual and Warranty Card
6 7
1. For any defect, in the judgment of our technician, caused under
normal use, we are responsible for repairing free of charge 12 months
commencing from the date of purchase at the discretion of our
company;
2. A valid warranty card and original purchase invoice must be presented
upon request of warranty service;
3. This warranty card shall not apply to the product if:
(a) It is consumable part(s), such as Filter, or;
(b) it has explicitly modified or repaired in any way by persons other
than technicians of this company, or;
(c) it has been damaged through misuse, malicious acts, negligence,
the inflow of any liquid, or;
(d) losses or damages are caused by force majeure or natural
disasters.
4. No alteration to this warranty card will be allowed;
5. The warranty terms and conditions are subject to change without prior
notice;
6. Please retain your proof of purchase for warranty service;
7. Please consult the dealer about the product compatibility with your
cell phone/ PDA before purchase. Product specifications are subject
to change without prior notice;
8. Please visit www.momax.net for the latest product information.
Warranty Conditions
1. Do not place the product as household waste;
2. Please dispose of discarded electronic products properly according to
local regulations;
3. MOMAX encourages you to participate in the electronic recycling
program.
Disposal of Electronic Products 簡介
IoT 智能溫濕度感應器 (SL6S)
搜尋 “SL6S” in helpdesk.momaxsmart.com
獲取有關設定和支援。
觀看最新的視頻教學，學習設置和操作您的 SL6S。
隨時了解最新資訊。
8 9
如何加添子裝置
產品總覽
1
2
3
4
55
6
7
8
9
10 11
產品規格
µA
包裝內容
溫度和相對濕度範圍
12 13
注意事項
智能移動應用平台服務協議
如何處理廢棄電子產品
保養條款
14 15
簡介
搜尋 “SL6S” in helpdesk.momaxsmart.com
獲取有關設定和支援。
觀看最新的視頻教學，學習設置和操作您的 SL6S。
隨時了解最新資訊。
IoT 智能溫濕度感應器 (SL6S)
本產品是一個IoT溫度濕度感應器。本產品使用Zigbee 3.0 協議與網關連上
並接到互聯網連接。
如何加添子裝置
本產品必須配合MOMAX 多功能網關使用
配對前請先打開溫度濕度感應器的後蓋,確定電池已安裝妥當，長
按“reset”鍵30秒才開始配對。
當網關成功配對上MOMAX Smart APP 後，
進入MOMAX Smart APP 內智能網關的頁
面，按“+添加”以配對子裝置，並選取溫
度濕度感應器。
16 17
Tabla de contenidos
