Moki PAIRBUDS Manual de usuario
1
User Guide
MOKI PAIRBUDS
True Wireless Earbuds
2
Contents
Overview
Customise Your Fit
Activate
Inter-pairing
Connecting & Pairing
Playing Music
Phone Calls
Recharge ChargeDock
Turn O PairBuds
Recharge PairBuds
Charge a USB Device
LED Indicator
Technical Specifications
Troubleshooting
Safety Information
4
5
6
7
9
10
11
12
13
14
15
4
MOKI
PAIRBUDS
Thank you for purchasing genuine Moki PairBuds.
These true wireless earbuds are the next evolution
in personal audio. Using Bluetooth®4.1 they are
more ecient so can play longer and can reach
frequencies previously only capable through wires.
Please read all information and warnings before
using PairBuds. Improper use may lead to the
product being damaged or lost. Care must be taken
to ensure a secure fit. Strenuous or high impact
activity may cause buds to dislodge.
Do not use earphones in situations that require
full awareness of your surroundings such as driving
or cycling.
CONTENTS • 2 x PairBuds (Bluetooth True Wireless Earphones)
• ChargeDock (charging station + power bank)
• Silicone Buds (2 x Small, 2 x Medium, 2 x Large)
• MicroUSB Charge Cable
• User Guide
5
CHARGEDOCK OVERVIEW
PAIRBUD OVERVIEW
ON/OFF
LED charge indicator
MicroUSB input (1A)
( To recharge ChargeDock )
USB output (1.5A)
( To recharge other device )
LED indicator
Changeable ear tips
ON/OFF
6
CUSTOMISE
YOUR FIT
INSERTING
THE PAIRBUDS
Moki PairBuds come with three dierent sizes of
changeable earbud tips. Ensure that you have a firm
but comfortable fit which will help achieve the highest
quality sound. We recommend trying all the earbud
tips on each Left and Right PairBud to find the size
that suits each ear the best.
• 3 pairs silicone buds
Check for “L” (Left) & “R” (Right) on each PairBud.
1) Tilt the PairBud slightly forward and insert the tip into
your ear
2) Secure the fit by rotating each PairBud until it feels
comfortable. If PairBuds move or feel loose when gently
shaking your head try the next size or use memory
foam buds.
7
Moki PairBuds (and the ChargeDock) are partially
charged when purchased. For best performance on
first use we recommend you recharge them fully.
1) Place PairBuds into the ChargeDock. They
magnetically snap into the dock ports and
automatically start recharging.
2) Spin the top cover of the ChargeDock to reveal the
USB ports. Connect the MicroUSB to the ChargeDock
and connect the Standard USB to a port on a
computer or USB power adaptor (1A).
3) The LED indicators on the ChargeDock will start
flashing, ChargeDock is fully charged when all four
LED’s glow solid (about 2-3 hours). Full charge of the
PairBuds will take about 1 hour.
The “L” and “R” PairBuds inter-pair with each other by
default. The user can simply take out both PairBuds
from the ChargeDock and they will inter-pair to each
other automatically.
Note:
If they fail to inter-pair automatically, you may reset the
inter-pair connection (see page 8 ). PairBuds take 3
seconds to turn on/o from the case.
CHARGE
INTER-PAIRING
THE PAIRBUDS
(continued)
8
Once the PairBuds have been turned ON, the “L” Pair-
Bud LED will flash red/blue while the LED on the “R”
PairBud will flash blue. You may then pair the PairBuds
with your Bluetooth device.
If the PairBuds fail to pair a reset is required.
1) Power o both PairBuds. Hold buttons for 3-5
seconds. LED blinks red once then o.
2) Press and hold the buttons on each PairBud for
about 8 seconds or until the LED indicators on both
rapidly blink red/blue (this will reset pairing on both).
Place both PairBuds back in ChargeDock and remove
again after 3 seconds.
3) PairBuds will re-establish a connection with each
other. The left PairBud will flash red/blue and the
right PairBud will flash blue only. After inter-pairing is
successful, connect to your Bluetooth device.
INTER-PAIRING
THE PAIRBUDS
(continued)
RESET
INTER-PAIR
CONNECTION
9
CONNECT TO A
BLUETOOTH
DEVICE
PAIRING WITH A
NEW BLUETOOTH
DEVICE
PLAYING MUSIC
Moki PairBuds can only connect to Bluetooth enabled
audio devices. Make sure you turn ON / Enable
Bluetooth on the device.
In your devices settings:
1) Go to Bluetooth. Turn “ON”
Available Devices will soon update, - “MOKI PairBuds”
should be listed. Select it to connect.
2) The PairBuds will notify you with “CONNECTED”
message.
1) Disconnect / Unpair the Bluetooth connection from
any previously paired device. Under Settings - Turn
OFF Bluetooth or select “Forget Device”
2) On the new device turn ON Bluetooth and repeat
the above connection steps.
Once you are connected via Bluetooth, simply select
the music app on your device and press play. Once
music is selected you may play / pause by tapping
either earbud once.
Note:
PairBuds reconnect to previously connected devices when
available. If more than one device is detected nearby, it will
attempt to pair with the last device used. Turn “OFF” Bluetooth on
other devices if connection is not successful. Repair the inter-pair
connection if necessary (see page 8).
10
MAKING A CALL: PairBuds may be used as a headset
when making mobile phone or VoIP calls. Ensure your
device / app is set to “Play calls through Bluetooth
when available” or similar.
ANSWER INCOMING CALL: When your phone rings
the music will pause and you will hear “incoming”
announced through the left PairBud followed by a
series of beeps. Tap the left PairBud button to answer
the call.
END CALL: Tap left PairBud button to end the call.
REDIAL LAST CALL: Double tap left PairBud and your
mobile phone will automatically redial the last number
you called.
1) Connect a MicroUSB cable to the MicroUSB port on
the ChargeDock. Connect the other end to a USB port
on your USB wall adaptor, computer or power bank (1A).
2) While the ChargeDock is recharging, the LED
indicators blink and then glow solid blue to indicate
the percentage of charge reached (pg 13). When fully
charged all four LEDs will glow solid - (disconnect cable).
MAKING OR
RECEIVING
CALLS
CHARGING THE
CHARGEDOCK
Tabla de contenidos
Otros manuales de Auriculares de Moki
