Moe's AM43 Manual de usuario

AM43 Blind Drive Motor

Manual Instruction

AM43-0.45/

40-ES-EB

Model Input Power Solar panel

specs Lock-rotor

current Speed Range Torque Rated Current Battery Capacity

DC charger

8.4VDC 12V/0.3W 1.8A 20-40rpm 0.45Nm 1A 7.4VDC/

1000mAh

1.Features

2.Motor Speciﬁcations

4.Installation

3.Motor Illustration

Motor can set upper & bottom limit positions and limits can be saved even

when motor power oﬀ;

Tow running modes: tilting & continuous moving.Motor default mode is

tilting;

Motor can be control by APP on your smart phone;

Bluetooth bi-direction technology,you can see the status of your shades in

anytime;

Motor speed is adjustable on th APP;

Large battery capacity support long time working;

for auto-control.

Do not exposure it under strong direct sunshine.Keep the

blind engine far away from high temperture or wet place

for using or storing.

UP Indicator Setting button

Solar & sensor connecting port

DOWN

Blind engine ﬁxing plate installation options

1.3M adhesive 2.Screw ﬁxing

Protection

teeth

Please leave 3-5mm space

between the bottom position

and support bracket during

installation.

Connect the solar panel or sensor to blind engine;Please pay attention the

wires in case wires wrapping.

Correct installation

Tighten the cords or chains to driving gear.

Choose compatible driving gear

Remove the cover plate of driving gear

Thin cord strings and

small bead chains Thick cord strings Large bead chains

Enjoy Our Smart Life

Support:

[email protected]

1. Power On/Oﬀ

5. Upper limit setting (Motor will automatically exit setting mode after 30'' if motor without receiving any order)

5. Bottom limit setting (Motor will automatically exit setting mode after 30'' if motor without receiving any order)

2. Motor working modes

3. Dot mode/continuous mode switch 4. Change direction

Dot move mode

(apply to venetian blinds,

dual shades,triple shades)

Press the setting button for 7'

Blue indicator slowly

ﬂash for 3 times

(1'1on,1'oﬀ)

Continuous

driving mode

Power on

Press the setting button for 1' Blue indicator ﬂash for 2'

Hit the button <1.5",motor

stop whenever you release your hand

keep hitting the button >1.5",motor move straightly

Hit the setting button 5 times

(each hit less then 1s,and every

hit not more than 1s)

Indicator ﬂash blue 3 times.

Now motor working mode switch

Hit the setting button

for 3",motor enter into

setting mode

Hit the setting button

for 3'

Indicator turn red

Indicator ﬂash blue 3 times

Now motor save

the upper limit

Please UP button enter

into limit setting mode

Indicator ﬂash

red quickly

Move the motor to

plaesed position

Hit the setting button

for 3",motor enter into

setting mode

Hit the setting button

for 3'

Indicator ﬂash blue 3 times

Now motor save

the upper limit

Please Down button enter

into limit setting mode

Indicator ﬂash

red quickly

Move the motor to

plaesed position

Hit the up and down button

at the same for 3'

Indicator ﬂash blue 3 times.

Now motor dorection change

Hit the button for 1",

motor move directly

Power oﬀ

5.Setting Instruction

(Motor will automatically exit programming mode after 30" if motor receiving any order Motor restore

to factory setting will delete all setting you done before)

TIpswich:Motor run in dot move before and after limit set,please

go to dot and conﬁrm(tips:Max 18 letter space limites ﬁlling new name)

7. Restore factory setting

Ⅰ. Download APP II. Shades setting

Ⅲ. Change password on APP

Ⅴ. Scenes setting

Ⅳ. Limits setting

Search:Blind engine Tap “+", the APP start to

search devices Tips:the APP

can add maximum 7 devices

You can do various settings

after device connection

Fill a new name on your

device and conﬁrm

(tips:Max 18 letter space

limited ﬁlling new name)

Choose the type of your

shade and ﬁnish the shades

setting

Indicator turn red Hit the setting

button for 7'

Hit the setting button

for 3",motor enter into

setting mode

Indicator ﬂash blue 3 times

Now motor save

the upper limit

Enter shades setting

interface and choose

“change password”

item

Input the new password,

factory default password

is “8888”

Enter shades setting interface,

choose “upper limit setting”.

Make the shade go to upper

limit position then save the limit

Tip:when you do the limit setting,

motor run in dot move mode.

Enter shades setting interface,

choose “bottom limit setting”.

Make the shade go to upper

limit position then save the limit

Tip:when you do the limit setting,

motor run in dot move mode.

1) Choose “scenes setting”

menu(Tips:Max 6 scenes

can be added)

2) Tap “scene name

setting”

3) Name the scene and

save it

4) Tap “+” on top right

corner to add device

5) Set the favorable

positions and save

6) When you ﬁnish adding

devices,tap “save scene”

ﬁnish the scene setting

(Tips:Keep holding the

“device”menu can do

other setting operation)

7) Choose the scene and tap

“start scene”. Devices added

to scene will start to run

Ⅵ. Timing setting

Ⅶ. Winter & summer mode setting

Troubles Troubles Reason Elimination MethodNO.

Subscribe here

A.choose proper motor

B.check motor installation

A.power oﬀ

B.motor enter overload protection

Connect to charger port

Tips: please check carefully and don't make mistake on the 8.4VDC charger port and sensor connection port 404002(V1.2)

A.overloaded

B.improperly installation make motor stuck

A.power oﬀ

B.motor enter overload protection

Put the charged on sensor connection

port

Motor does't work or run slowly

Motor suddenly stop working

Motor does't work when you

charge motor

Before you do the timing setting

1.Timing mode is only available after

the shades ﬁnish limit setting

2.Max 4 timing setting can be added

3.Each time turn oﬀ the device or the

device power oﬀ, the device need to

connect to APP proofread your system

Time

Before you choose a season

mode

1.shades are already set the limits

and installed the light sensor

2.you could only open either winter

or summer mode

First, open the light sensor

detection function, choose

the light intensity by sliding

the bar and save it.

Then choose “start time” or “close

time”. Set the light detection time

and save, for example 9:00-19:00

After you ﬁnish the setting,

save the season mode setting

First, move the shade

to favorable position,

then choose the time

you want.

Choose the date and

save the setting

7.Troubles shooting

Thank you for your support and purchase at

we Moes,we are always here for your complete

satisfaction,just feel free to share your great

shopping experience with us.

If you have any other need,please do not hesitate

to contact us ﬁrst,we will try to meet your demand.

moes

@moessmart

@moes_smart

[email protected]

www.moeshouse.com

Please resd the instruction manual carefully

before using the product

Este manual sirve para los siguientes modelos

Otros manuales de Motor de Moe's

Moe's

Moe's AM43 Manual de usuario

Manuales populares de Motor de otras marcas

Rotax

Rotax 125 senior MAX evo Manual de usuario

Kohler

Kohler K361 Manual de usuario

MTD

MTD OHV Series Manual de usuario

Kohler

Kohler COMMAND CH18-745 Manual de usuario

Mercury

Mercury D4.2L D-Tronic Manual de usuario

Selve

Selve SE Plus-RC Series Manual de usuario

Perkins

Perkins 1206E-E66TA Manual de usuario

Skov

Skov DA 174 Manual

Rossi

Rossi TX11 Series Manual de usuario

Siemens

Siemens SIMOTICS T-1FW3 Hoja de instrucciones

AL-KO

AL-KO PRO 350 Manual de usuario

MTU

MTU 12 V 4000 Lx4 Manual de usuario

Nanni

Nanni N3.30 Manual de instrucciones

Nanni

Nanni N5.160 CR2 Manual de usuario

KSB

KSB SuPreme Series Instrucciones de instalación

Hiwin

Hiwin EM1 Series Manual de usuario

Rotax

Rotax 912 i series Instrucciones de funcionamiento

Siemens

Siemens SIMOTICS XP 1MB1 Manual de usuario