Mobius Trimmer M108S Manual de usuario
USER GUIDE
©2020 ETEROS TECHNOLOGIES INC. ALL RIGHTS RESERVED. | UG2004M108S
INTRODUCTION
Thank you for purchasing the Mobius Trimmer M108S, the world’s best cannabis and hemp trimmer.
When properly congured and operating within design specications, this industrial agricultural
material processing machine offers unrivalled output and a nished product almost indistinguishable
from hand-trim.
The information available in this guide will provide you with a thorough understanding of how to
safely use this device to maximum effect. Please heed all safety warnings and instructions as they are
critical for safe and effective use of the equipment. The M108S is a signicant step forward in trimming
technology and may operate differently than you are accustomed to. Following the instructions in this
guide will allow you to benet from these innovations.
If you have any questions or encounter topics not covered in this guide, please feel free to reach out
to your location of purchase, or Mobius directly. Should you want additional, one-on-one training or
to certify a Mobius Lead Operator, please reach out to Mobius directly for information on training
services. Mobius also offers consulting services for automation integration and for setting up the ideal
trim room, along with accessories for cleaning and component storage for your M108S.
We hope you enjoy your trimming experience with the M108S. Happy trimming!
This User Guide is a comprehensive manual covering the operation and maintenance of the MOBIUS
TRIMMER M108S processing machine as of the date of publication. ETEROS TECHNOLOGIES reserves the
right to make updates to the machine from time to time. In the event of an update, this User Guide
will remain appropriate for the safe operation and maintenance of your unit. This User Guide, as well
as any documentation supplied by component manufacturers, are to be considered the information
package associated with this device. Every operator must read and understand the User Guide. The
manual should be located within easy access for periodic review.
For the most up to date version of this manual, please refer to the manufacturer’s website at
mobiustrimmer.com
NOTES:
TABLE OF CONTENTS
SAFETY INSTRUCTIONS
DISCLAIMER
WARNING LABELS
SERVICE & REPAIRS
GENERAL SAFETY PRECAUTIONS
5
5
6
6
7
SAFETY 4
UNCRATING
REASSEMBLY
CONVEYOR SETUP
TANDEM SETUP
13
15
19
21
SETUP 12
APPENDICES 37
M108S
AIRTHREAD TENSION TUMBLER
TRIFLEX BLADE SYSTEM
VARIABLE SYSTEM CONTROL
WHAT’S IN THE CRATE
9
10
10
11
11
MACHINE OVERVIEW 8
OPERATION PREP
GENERAL OPERATION
HOT SWAPS
WET TRIMMING
DRY TRIMMING
TIPS & TRICKS
23
23
26
27
28
29
OPERATION 22
CLEANING
PREVENTATIVE MAINTENANCE
EXPECTED SERVICE LIFE OF STANDARD WEAR PARTS
WARRANTY
SPECIFICATIONS
32
32
34
35
36
GENERAL 31
MOBIUS TRIMMER M108S USER GUIDE
4
SAFETY
5
MOBIUSTRIMMER.COM
SAFETY INSTRUCTIONS
To ensure operator safety while in use, this device includes decaling, guarding, and other safety features.
Operators are encouraged to use caution and best judgment when using equipment. Equipment
should be serviced when required.
To avoid possible damage to the machine and risk of injury to the operator, consult with an ETEROS
TECHNOLOGIES representative to answer any questions.
This document refers to the ETEROS TECHNOLOGIES product trimming machine as the M108S. Since this
machine has moving blade components, special safety precautions must be observed to reduce the
risk of personal injury. Careless or improper use may cause serious or even fatal injury. Please read and
understand these precautions thoroughly before using the machine.
All operators must read and understand this User Guide and be trained in safe operation and use of
the M108S. We recommend the owner of this equipment develop a standard operating procedure
specic to each worksite to address any local hazards or other conditions not outlined in this User
Guide. The M108S must be inspected regularly for damage, component failure, and wear. Results of
inspection activity should be documented.
ETEROS TECHNOLOGIES makes every effort to ensure the M108S is compliant with all current safety
standards. It is the responsibility of the owner to ensure all municipal, provincial, state, county, territorial,
and federal codes, regulations and standards have been met in each working location. Do not lend
or rent your machine without providing the User Guide. A rst-time operator should receive practical
instruction before using the machine.
This machine is not to be used for any purpose other than those expressly stated in the User Guide,
advertising literature, or other ETEROS TECHNOLOGIES written material pertaining to the M108S.
Operators must be in good physical condition and mental health to operate this device. Under no
circumstances should the device be operated by anyone under the inuence of any substance,
including drugs or alcohol, which might impair vision, dexterity, or judgment. Do not operate the M108S
when fatigued. Be alert. If tired while operating the device, take a break. Fatigue may result in loss
of control. Working with any equipment can be strenuous. If you have any condition that might be
aggravated by strenuous work, check with your doctor before operating the device.
DISCLAIMER
ETEROS TECHNOLOGIES recognizes that the M108S is a purpose-built machine for processing cannabis
and hemp by licensed producers. Please check all municipal, provincial/state, and federal laws and
regulations before using the M108S. ETEROS TECHNOLOGIES does not promote or condone the use of
processing equipment in any way that may be deemed illegal.
It is not the responsibility of ETEROS TECHNOLOGIES to conrm alternative equipment applications.
MOBIUS TRIMMER M108S USER GUIDE
6
WARNING LABELS
SERVICE & REPAIRS
Minor repairs may be carried out by the end-user under the guidance of Eteros Technologies. Any
other repair work may only be carried out by Eteros Technologies or a designated authorized agent
(service technician).
Should the need arise, please notify:
ETEROS TECHNOLOGIES
17665 66A AVE. UNIT 202
SURREY, B.C. V3S 2A7
1-866-874-6244
Improper interfacing, improper repair, or unauthorized modication could result in void warranty claims.
WARNING
IMPELLER CONTINUES MOVING AFTER ENGAGING E-STOP.
DO NOT REMOVE FILTER BAG UNTIL IMPELLER COMES TO A FULL STOP.
LA ROUE À AUBES CONTINUE À TOURNER MÊME APRÈS L’ENGAGEMENT DE L’ARRÊT D’URGENCE.
NE RETIREZ PAS LE FILTRE À MANCHES JUSQU'À CE QUE LA ROUE À AUBES SOIT COMPLÈTEMENT ARRÊTÉE.
AVERTISSEMENT
7
MOBIUSTRIMMER.COM
GENERAL SAFETY PRECAUTIONS
1. READ and become familiar with the entire User Guide. LEARN the equipment applications, limitations,
and possible hazards.
2. KEEP GUARDS IN PLACE and in working order.
3. DO NOT USE THE DEVICE IN A DANGEROUS ENVIRONMENT or damp or wet locations. Never expose
control panel directly to rain or water. Keep work area well illuminated.
4. DO NOT use the device in the presence of ammable liquids or gases.
5. KEEP WORK AREA CLEAN. Cluttered areas and workspaces invite accidents.
6. KEEP CHILDREN and BYSTANDERS AWAY from the device. Visitors should be kept at a safe distance
from the work area.
7. DON’T FORCE THE EQUIPMENT. It will operate optimally and safely at the rate for which it was
designed.
8. USE THE RIGHT TOOL. Don’t force the device to do a job for which it was not designed.
9. ALWAYS WEAR EYE PROTECTION when the equipment is operational or when maintaining the
equipment.
10. ALWAYS WEAR EAR PROTECTION when the equipment is operational.
11. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other
jewelry which may get caught in moving parts. Non-slip footwear is recommended. Wear protective
hair covering to contain long hair.
12. POWER DOWN AND DISCONNECT EQUIPMENT before servicing and when changing accessories,
such as tumbler, blades, etc.
13. INSPECT MACHINE AND REMOVABLE PARTS PRIOR TO OPERATION. The equipment should be
inspected prior to use to ensure proper operation in performing its intended function. Check for
damage, alignment of moving parts, binding of moving parts, breakage of parts, mounting, and
any other conditions that may affect its operation. Any damaged part including guards should be
properly repaired or replaced. Ensure that electrical box lter is in place and clean.
14. ALWAYS OPERATE DEVICE IN A WELL-VENTILATED AREA. Dust generated from certain materials can
be a health hazard. Use a dust collection system whenever possible. If dust extraction is not installed,
a face or dust mask should be worn.
MOBIUS TRIMMER M108S USER GUIDE
8
MACHINE OVERVIEW
9
MOBIUSTRIMMER.COM
MOBIUS TRIMMER M108S
Control Panel
Hex Screens
Left Front Sensor Block
E-Box Filter
Clear Top Screen
Outfeed
Separator
Fan Housing Air Filter
Trim Tote
Tumbler
Fan Housing
Infeed
Hockey Stick
Spare Belt
Tilt Legs
Accessory Caddy
Right Rear Sensor Block
Belt, Gears & Pulleys
TriFlex Blade Cartridges
MOBIUS TRIMMER M108S USER GUIDE
10
AIRTHREAD TENSION TUMBLER
TRIFLEX BLADE SYSTEM
Spacer Bar
Helical Blade
Gear Side
Bearing Block
Spacer Bar Pin
Bed Knife Pin
Bed Knife
Bed Knife
Spacer Bar
END VIEWS:
Infeed End Cap
Infeed Tab
Outfeed End Cap
Tumbler Rings
Tumbler Ring
Tabla de contenidos
