MJ LED LIGHTNING MJ-1018F Manual de usuario

LED ROTATION BEAM LIGHT

INSTRUCTION MANUAL

Thank you for choosing our LED rotation beam light. For the sake of your safety, Please read

and follow these instructions carefully and keep this manual in a safe place for future

reference.

Catalogue

Chapter Page

Safe Usage Of The Product -----------------------------------------------------------------------------------------3

Install The Equipment ------------------------------------------------------------------------------------------------4

Power Code Connection ---------------------------------------------------------------------------------------------4

DMX Connection ------------------------------------------------------------------------------------------------------5

DMX Terminator -------------------------------------------------------------------------------------------------------6

Function Set --------------------------------------------------------------------------------------------------------------6

LED Display Menu Function ----------------------------------------------------------------------------------------6

Maintenance -------------------------------------------------------------------------------------------------------------7

Keeping The Product Clean -----------------------------------------------------------------------------------------7

Trouble Shooting--------------------------------------------------------------------------------------------------------7

Equipment and Appendix---------------------------------------------------------------------------------------------8

Channel List---------------------------------------------------------------------------------------------------------------8

Technical Parameters---------------------------------------------------------------------------------------------------9

☆Important notice:

·In this instruction for use contains about the installment and the use aspect important information of the LED moving

head. When installing and using, you need to look this usage instruction strictly.

·Before open the LED moving head and if you want to do the repair work, please make sure the power source is at the

separation condition.

·Every unit is tested completely and packed properly by the manufacturer. Please make sure the packing and the unit are

in good condition before installation and use. Should there be any damage caused by transportation, consult your dealer

and do not use the unit. Any damage caused by improper use will not be assumed by the manufacturer or dealer.

Attention: Unceasingly carries on the product improvement about our company the policy, in this instruction booklet

carries the data will have the possibility to be able to change in the future, when no longer separate notice change matters

concerned. Our company retains when the product improvement changes the related specification the authority. This

instruction booklet publisher cannot be responsible regarding this instruction booklet in information accuracy, also cannot

the related consequence which causes regarding these information be responsible.

SAFE USAGE OFTHE PRODUCT

When unpacking and before disposing of the carton, check there is no transportation damage before

using the product. Should there be any damage caused by transportation, consult your dealer and do

not use the apparatus.

The product is for indoor use only, IP20. Use only in dry locations. Keep this device away from rain

and moisture, excessive heat, humidity and dust. Do not allow contact with water or any other

liquids.

The product is not designed or intended to be mounted directly on to inflammable surfaces

The product is only intended for installation, operation and maintenance by professional person.

The product must be installed in a location with adequate ventilation, at least 50cm from adjacent

wall surfaces. Be sure that no ventilation slots are blocked.

Do not product the beam onto inflammable surfaces, minimum distance is 5m.

Avoid direct exposure to the light from the lamp. The light is harmful to the eye.

Do not attempt to dismantle or modify the projector in any way.

Electrical connection must only be carried out by qualified personnel.

Before installation, ensure that the voltage and frequency of power supply match the power

requirements of the projector.

It is essential that each projector is correctly earthed and that electrical installation conforms to all

relevant standards.

Do not connect this device to any other types of dimmer apparatus.

Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the

power-cord come into contact with other cables. Only handle the power-cord by the plug. Never pull

out the plug by tugging the power-cord.

Keep the optical system clean. Do not touch the LED lens with bare hands.

The product should always be installed with a secondary safety fixing. On the projector base brink,

there is a hole for the safety cord provided. It should be attached as shown in “installing the projector”

section.

LED lens shall be changed if they have become visibly damaged to such an extent that their

effectiveness is impaired, for example by cracks or deep scratches.

Exterior surface temperatures of the luminaire after 5 minutes operation is 40°C，when steady state is

achieved 50°C.

There is no user serviceable parts inside the projector, do not open the housing and never operate the

product with the covers removed.

If you have any questions, don’t hesitate to consult your dealer or manufacturer.

★Always disconnect from the mains, when the device is not in use or before cleaning it or

before attempting any maintenance work !

Install The Equipment:

Use 2pcs clamp (need to purchase).Use clamp fix with light hook which in the packing box with

light, then use fastlock install to the bottom of lamp. Hang the fixture on the structure and fasten the

screw attached to each clamp. Make sure the light is installed reliable, and confirm the light which

you fixed is strong enough for hanging the light. Base on safety reason, please according to the

above picture using safety wire cross the light to make it strong enough again.

Warning!

1．Hook and clamp only use for hanging the light. Do not use clamp as a tool to move fixtures.

2．Base on safety reason, please use the safety cord which can afford the weight ten times of lamp

through Insurance hole for auxiliary hanging.

Power Code Connection:

Connect the power cord as follows:

L (live) =brown

E (earth) =yellow/green

N (neutral) =blue

Use the plug provided to connect the mains power to the projector paying attention to the voltage and

frequency marked on the panel of the projector. It is recommended that each projector be supplied

separately so that they may be individually switched on and off.

★It is essential that each projector is correctly earthed and the electrical installation conforms

to all relevant standards.

DMX Connection:

Connection between the controller and a projector and between one projector and another must be

made with a 2 core-screened cable, with each core having at least a 0.5mm diameter. Connection to

and from the projector is via cannon 3 pin (which are included with the projector) XLR plugs and

sockets. The XLR's are connected as shown in the figure above.

Note: Care should be taken to ensure that none of the pins touch the metallic body of the plug or each

other. The body of the plug is not connected in any way. The XLED 590 accepts digital control

signals in protocol DMX512 (1990).

Connect the controller’s output to the first fixture’s input, and connect the first fixture’s output to the

second fixture’s input and connect the rest fixtures in the same way. Eventually connect the last

fixture’s output to a DMX terminator as shown in the figure below.

DMX Terminator:

In the Controller mode, at the last fixture in the chain, the DMX output has to be connected with a

DMX terminator. This prevents electrical noise from disturbing and corrupting the DMX control

signals.

The DMX terminator is simply an XLR connector with a 120Ω (ohm) resistor connected across pins 2 and 3, which

is then plugged into the output socket on the last projector in the chain. The connections are illustrated below.

Function Set:

Graphic part A．Function button

B．UP

C．DOWN

D．Enter

A B C D

Operation description：Press “A” will cycle out seven different functional effect,LED Top row in represent the

current function（Reference function table）。 LED Top row on behalf of the function in the address code、or speed

and other parameters。Press Bor Ckey can modify the parameter value。Press Dto confirm。

LED Display Menu Function:（All the functions are selected,press D to confirm.）

Display

Function description

1 A001 10 channel address code，（001—512）

B、C button plus or reduce address code value

2 D001 38 channel address code，（001—512）

B、C button plus or reduce address code value

CC00

7 colors change jump

，

（

01—99

）

B、C button change speed of jump

CP00

7 colors change fade

，（

01—99

）

B、C button change speed of fade

5 DE00 Colorful pulse variable、gradient，（ 01—99）

B、C button change speed of pulse and gradient

6 FF00 Running changes，（01—99）

B、C button change speed of running

BEB1

7 colors sound control running changes 1

BEB2

7 colors sound control running changes 2

Maintenance:

To prolong the life of the projector, some maintenance work has to be done to ensure the LED optical

system in good condition. If the projector does not function, check the fuses on the power socket of

the projector, they should only be replaced by fuses of the same specification. Should these be

damaged, call a qualified technician before replacement. The projector has thermal protection device

that will switch off the projector in case of overheating. Should either of these operate, check that the

fans are not blocked, and if they are dirty, clean them before switching on the projector again. Check

that the fans are operational, if not, call a qualified technician.

☆Any maintenance work should only be carried out by qualified technicians.

Keeping The Product Clean:

To ensure the reliability of the projector, it should be kept clean. It is recommended that the fans

should be cleaned every 15 days. LED lens should also be regularly cleaned to maintain an optimum

light output.

Cleaning frequency depends on the environment in which the fixture operates: damp, smoke or

particularly dirty surroundings can cause greater accumulation of dirt on the unit's optics. Asoft cloth

and typical glass cleaning products should be used for cleaning. It is recommended to clean the

external optics at least once every 15 days.

☆Do not use any organic solvent, e.g. alcohol, to clean housing of the apparatus.

Trouble Shooting:

Problem

Answer

The LED moving head light doesn’t switch on.

Check the fuse the power socket

Although shines, but the LED moving head

lamp doesn’t accept the instruction of the

controller.

Check the digital start address and

also check the connection situation of

the communication control line

LED moving head lamp only can work

intermittently.

Inspect the power supply and voltage

is whether normal.

Do not receive the DMX512 signal. Whether the signal lines do contact

well or broken.

The light beam appears gloomily.

Check that the heat dissipation system

is running normally or Inspect the

optics part is whether clean.

☆Other maintain work should by the specialist which has the experience to carry on.

Equipment and Appendix:

The packing list of this light as follows:

☆Led moving head light 1pcs

☆Power Cable 1pcs

☆XLR connector 1unit

☆Light Hook 2pcs

☆The Product of Instruction 1pcs

Channel List:

10Channels description

Channel

Function

Description

CH1 Motor Motor position

CH2

Motor

Motor speed

CH3 Main dimmer R.G.B.W main dimmer，Linear dimmer，from dark to bright

CH4

Main strobe

R.G.B.W. main strobe,from slow to quick

CH5

Function

choose

0--20

：

DMX 10 channel control

；

21--70

：

jump change

；

71--120：fade；121--170：Pulse；171--220：running；221--240

：

voice control 1；241--255：voice control 2

CH6

Function speed

Function speed from slow to quick

CH7

R dimming

，

Linear dimming

，

from dark to bright

CH8

G dimming

G dimming，Linear dimming，from dark to bright

CH9 B dimming B dimming，Linear dimming，from dark to bright

CH10 W dimming W dimming，Linear dimming，from dark to bright

38 channels description

Function

Description

CH1

Motor Motor position

CH2

Motor

Motor speed

CH3 Main dimmer R.G.B.W main dimmer，Linear dimmer，from dark to bright

CH4 Main strobe R.G.B.W. main strobe,from slow to quick

CH5

Function choose 0--20：DMX 10 channel control；21--70：jump change；

71--120：fade；121--170：Pulse；171--220：running；221--240：

voice control 1；241--255：voice control 2

CH6

Function speed

Function speed from slow to quick

CH7

R 1 dimming

，

Linear dimming

，

from dark to bright

CH8

G 1 dimming

，

Linear dimming

，

from dark to bright

CH9

B 1 dimming

，

Linear dimming

，

from dark to bright

CH10 W 1 dimming W 1 dimming，Linear dimming，from dark to bright

CH11 R 2 dimming R 2 dimming，Linear dimming，from dark to bright

CH12 G 2 dimming G 2 dimming，Linear dimming，from dark to bright

CH13 B 2 dimming B 2 dimming，Linear dimming，from dark to bright

CH14

W 2 dimming

，

Linear dimming

，

from dark to bright

CH15

R 3 dimming

，

Linear dimming

，

from dark to bright

。。。。。。。。

。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。

CH38

W 8 dimming

，

Linear dimming

，

from dark to bright

Technical Parameters:

Voltage: AC100V-240V; 50/60Hz

Power Consumption: 100W (220V)

LED Bulbs: 10W*8LEDs 4-in-1 LED

LED Current: 500mA

LED Lifetime: 50000Hours

Adjusts the light: 0-100 electron adjusts the light

Strobe: 1-25/second high speed strobe

Head Movement: Tilt 180°,

Beam Angle: 6°

Control mode: DMX 512, Stand –alone mode, Self-test mode, Sound, Master/slave

DMX Channel: 10CH, 38CH

Control Panel: LED display panel

IPGrade: IP20

Work Environment Temperature:-20°C~40°C

Net weight:7.5KG

Gross Weight: 8.8 kg

Package Size: 114 x 14x 19cm

Light Size(see it below)

Tabla de contenidos

Otros manuales de Equipo de iluminación de MJ LED LIGHTNING

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-3004 Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-B380 Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-3372 Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-2037C Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-2020 3W25DRGBW Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-3009A Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-1025 Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-2007 Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-1057 Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-2010 3W5DRGBW Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-3432A Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-1350B Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-3110 Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-2007C-1000 36P1W25DRGB Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-3343A20W36DCW Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-1280 Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING WIRELESS BATTERY PAR 910 Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-2610D18-4IN1 Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-1005 Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-3325C-200W26D Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-3615E Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-1005-4IN1 Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-3200 Manual de usuario

MJ LED LIGHTNING

MJ LED LIGHTNING MJ-3118B Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario