Mitsubishi Electric PocketProjector PK10 Manual de usuario

EN-1

LED Projector "Pocket"

MODEL

PK10

User Manual

This User Manual is important to you.

Please read it before using your projector.

EN-2

EN-3

The lightning flash with arrowhead symbol within

an equilateral triangle is intended to alert the user to

the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric

shock.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS

AC ADAPTER’S PLUG WITH AN EXTENSION CORD,

RECEPTACLE OR OTHER OUTLET.

NOTE:

WHEN USING THE AC ADAPTER, THE SOCKET-OUTLET

SHALL BE INSTALLED NEAR THE EQUIPMENT AND

SHALL BE EASILY ACCESSIBLE.

EN-4

WARNING

Only use the attached specified AC adapter and power

cord. If you use another AC adapter and power cord, it

may cause interference with radio and television reception

or damage your projector.

The attached AC adapter and power cord are to be used

exclusively for this product. Never use them for other products.

DO NOT LOOK DIRECTLY INTO THE LENS WHEN

THE PROJECTOR IS IN THE POWER ON MODE.

CAUTION

Not for use in a computer room as defined in the Standard

for the Protection of Electronic Computer/Data Processing

Equipment, ANSI/NFPA 75.

When using the projector in Europe:

COMPLIANCE NOTICE

This Projector complies with the requirements of the EC

Directive 89/336/EEC “EMC Directive” as amended by

Directive 92/31/EEC and 93/68/EEC, and 73/23/EEC “Low

Voltage Directive” as amended by Directive 93/68/ EEC.

The electro-magnetic susceptibility has been chosen at a

level that gains proper operation in residential areas, on

business and light industrial premises and on small scale

enterprises, inside as well as outside of the buildings. All

places of operation are characterised by their connection

to the public low voltage power supply system.

Your MITSUBISHI ELECTRIC product

is designed and manufactured with high

quality materials and components which

can be recycled and reused.

This symbol means that electrical and

electronic equipment, at their end-of-

life, should be disposed of separately

from your household waste.

Please, dispose of this equipment at

your local community waste collection/

recycling centre.

In the European Union there are

separate collection systems for used

electrical and electronic product.

Please, help us to converse the

environment we live in!

Note: This symbol

mark is for EU

countries only.

This symbol mark is

according to the

directive 2002/96/EC

Article 10 Information

for users and Annex

IV.

EN-5

Declaration of Conformity

Model Number : PK10

Trade Name : MITSUBISHI ELECTRIC

Responsible party : Mitsubishi Digital Electronics

America, Inc.

9351 Jeronimo Road, Irvine, CA

92618 U.S.A

Telephone number : +1-(949) 465-6000

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

Trademark, Registered trademark

Macintosh is registered trademark of Apple Computer Inc.

DLP., Digital Micromirror Device and DMD are all trademarks

of Texas Instruments.

Other brand or product names are trademarks or registered

trademarks of their respective holders.

Contents

Important safeguards......................................................6

Overview..........................................................................10

Power supply...................................................................11

Remote control (optional accessory).............................13

Installation.....................................................................15

Basic connections...........................................................16

Preparation.....................................................................18

Basic operation.............................................................20

Menu operation.............................................................23

Image adjustment............................................................26

Troubleshooting...............................................................28

Maintenance.....................................................................32

Indicators.........................................................................33

Specifications...................................................................35

EN-6

Important safeguards

Please read all these instructions regarding your projector

and retain them for future reference. Follow all warnings

and instructions marked on the projector.

1. Read instructions

All the safety and operating instructions should be

read before the appliance is operated.

2. Retain instructions

The safety and operating instructions should be

retained for future reference.

3. Warnings

All warnings on the appliance and in the operating

instructions should be adhered to.

4. Instructions

All operating instructions must be followed.

5. Cleaning

Unplug this projector both from the wall outlet and

battery before cleaning it. Do not use liquid aerosol

cleaners. Use a damp soft cloth for cleaning.

6. Attachments and equipment

Never add any attachments and/or equipment without

the approval of the manufacturer as such additions

may result in the risk of fire, electric shock or other

personal injury.

7. Water and moisture

Do not use this projector near water or in contact with

water. Never use the product if drop it in water.

8. Accessories

Do not place this projector on an unstable cart, stand,

tripod, bracket or table. Use only with a cart, stand,

tripod bracket, or table recommended by the

manufacturer or sold with the projector. Any mounting

of the appliance should follow the manufacturer’s

instructions and should use a mounting accessory

recommended by the manufacturer.

An appliance and cart combination should be moved

with care. Quick stops, excessive force and uneven

surfaces may cause the appliance and cart

combination to overturn.

9. Ventilation

Slots and openings in the cabinet are provided for

ventilation, ensuring reliable operation of the projector

and to protect it from overheating. Do not block these

openings or allow them to be blocked by placing the

projector on a bed, sofa, rug, or bookcase.

Ensure that there is adequate ventilation and that the

manufacturer’s instructions have been adhered to.

10. Power sources

This projector should be operated only from the type of

power source indicated on the marking label. If you are

not sure of the type of power, please consult your

appliance dealer or local power company.

EN-7

11. Power-cord protection

Power-supply cord should be routed so that it is not

likely to be walked on or pinched by items placed upon

or against it. Pay particular attention to cord at plug,

convenience receptacles, and points where it exit from

the appliance. Do not put the power cord under a

carpet.

12. Overloading

Do not overload wall outlets and extension cords as

this can result in a fire or electric shock.

13. Objects and liquids

Never push objects of any kind through openings of this

projector as they may touch dangerous voltage points or

short-out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the projector, adaptor or

battery.

14. Servicing

Do not attempt to service this projector yourself. Refer

all servicing to qualified service personnel.

15. Damage requiring service

Unplug this projector from the wall outlet and refer

servicing to qualified service personnel under the

following conditions:

(a) If the power-supply cord or plug is damaged.

(b) If the adaptor or the battery is damaged.

into the projector, adapter or battery.

(d) If the projector does not operate normally after

you follow the operating instructions. Adjust only

those controls that are covered by the operating

instructions. An improper adjustment of other

controls may result in damage and may often

require extensive work by a qualified technician

to restore the projector to its normal operation.

(e)If the projector has been exposed to rain or water.

(f )If the projector has been dropped or the cabinet

has been damaged.

(g) If the projector exhibits a distinct change in

performance- this indicates a need for service.

16. Replacement parts

When replacement parts are required, be sure that

the service technician has used replacement parts

specified by the manufacturer or parts having the

same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock or other

hazards.

17. Safety check

Upon completion of any service or repair to this

projector, ask the service technician to perform safety

checks determining that the projector is in a safe

operating condition.

18. Keep appropriate method when recharge the battery.

19. The projector is a precision instrument. Please pay

attention on static electricity.

EN-8

WARNING:

Unplug the power cord or remove the battery

immediately if there is something wrong with your

projector.

Do not operate if smoke, strange noise or odor comes out

of your projector, adaptor or battery. It may cause fire or

electric shock. In this case, unplug immediately and

contact your dealer.

Never remove the cabinet.

This product contains high voltage circuitry. An inadvertent

contact may result in an electric shock. Except as

specifically explained in User Manual, do not attempt to

service this product by yourself. Please contact your

dealer when you want to fix, adjust, or inspect the projector.

Do not modify the projector.

It can lead to fire or electric shock.

Do not keep using the damaged projector.

If the projector is dropped and the cabinet is damaged,

unplug the projector and contact your dealer for inspection.

It may lead to fire if you keep using the damaged projector.

Do not face the projection lens to the sun.

It can lead to fire.

Use correct voltage.

If you use incorrect voltage, it can lead to fire.

Only use the provided AC adaptor (02550-0112-00).

Do not place the projector on uneven surface.

Place the projector on a level and stable surface only.

Do not look into the lens when the projector is

operating.

It may hurt your eyes. Never let children look into the lens

when the projector is on.

Do not unplug the power cord or remove the battery

during operation.

It can lead to product failure, fire, electric shock or other

troubles.

Do not touch the air outlet grilles and bottom plate.

Do not touch them or put other equipment close to the air

outlet grilles because they become hot during operation.

The heated air outlet grilles and bottom plate may cause

injury or damage to other equipment. Also, do not put the

projector on a desk that is easily affected by heat.

Do not look into the air outlet grilles when projector is

operating.

Heat, dust, etc. may blow out of them and hurt your eyes.

Do not block the air inlet and outlet grilles.

If they are blocked, heat may be generated inside the projector,

causing deterioration in the projector quality and fire.

Don’t put upwards. Because of blocking exhausted hole.

Don’t drop.

Don’t throw it away.

Don’t project to person’s eyes.

EN-9

Place of installation

For safety’s sake, do not use the projector at any place

subjected to high temperature and high humidity.

Please maintain an operating temperature, humidity, and

altitude as specified below.

Operating temperature: between +41°F (+5°C) and

+95°F (+35°C)

Operating humidity: maximum 85%

Never put any heat-producing device under the

projector to prevent the projector from being

overheated.

Do not install the projector at a place that is unstable

or subject to vibration.

Do not install the projector near any equipment that

produces a strong magnetic field. Also refrain from

installing the projector near any cable carrying a large

amount of current.

Place the projector on a solid, vibration-free surface.

Otherwise it may fall, causing serious injury or damage.

Do not stand the projector on its end. It may fall,

causing serious injury or damage.

Do not place the projector near air-conditioning unit or

heater to avoid the air outlet and inlet grilles from being

exposed to hot air.

COMPLIANCE NOTICE OF FCC

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

receiver.

Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

Consult the dealer or an experienced Radio / TV

technician for help.

Changes or modifications not expressly approved by

Mitsubishi could void the user’s authority to operate this

equipment.

COMPLIANCE NOTICE OF INDUSTRY CANADA

This Class B digital apparatus complies with Canadian

ICES-003.

EN-10

Overview

COMPUTER

VIDEO

COMPUTER

VIDEO

AUTO POSITION

1 Focus ring

2 Control panel

3 Terminal cover

4 Terminal board

5 Air outlet grille

6 Lens

7 Kensington lock

8 Remote control sensor (Rear side only)

9 Air inlet grille

Control panel

1 LAMP indicator

2 POWER indicator

3 CHARGE indicator

4 Four directional buttons

JS: AUTO POSITION

button

JX: VIDEO button

JW: COMPUTER button

5 ENTER button

6 POWER button

7 MENU button

Terminal board

1 S-VIDEO terminal

2 VIDEO terminal

3 VGA IN terminal

4 Power jack

1 2 3

67 5

AUTO POSITION

COMPUTER VIDEO

Bottom side

1 Battery latch

Otros manuales para PocketProjector PK10

Tabla de contenidos

Otros manuales de Proyector de Mitsubishi Electric

Mitsubishi Electric

Mitsubishi Electric XD80 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric HC1500 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric HC9000D Manual de usuario

Mitsubishi Electric

Mitsubishi Electric WL2650U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric XL8U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric DLP PH50 series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MH2850U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric XD8500 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric DLP NW30U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric DLP FD730U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric HC6500 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric XD490U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric WD2000 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric XD470U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric XD205U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric XD50U MINI-MITS Manual de usuario

Mitsubishi Electric

Mitsubishi Electric XL1550U Instrucciones de instalación y mantenimiento

Mitsubishi Electric

Mitsubishi Electric XL7000U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric UD8400U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric XL9U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric SD220U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric DLP XD8100U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric DLP WD720U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric HC7900DW Manual de usuario

Manuales populares de Proyector de otras marcas

iEmmet

iEmmet MP-312 Manual de usuario

Epson

Epson VS400 Manual de usuario

Sony

Sony VPL-HS10 Marketing Specifications & Features Manual de usuario

Sony

Sony VPL-HW65ES Manual de servicio

Toshiba

Toshiba TLP-791U Manual de usuario

Philips

Philips LC1341 Guía de referencia

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manual de usuario

NEC

NEC NP600S EDU Manual de usuario

BenQ

BenQ SH753P Manual de usuario

Eiki

Eiki EK-623U series Manual de usuario

Epson

Epson PowerLite Pro Cinema 6020UB Manual de usuario

Epson

Epson PowerLite Home Cinema 705HD Manual de usuario

Christie

Christie LHD700 Manual de usuario

Navitar

Navitar FX Manual de usuario

InFocus

InFocus LitePro 560 Manual de usuario

Sony

Sony SRX-R815P Manual de usuario

Vivitar

Vivitar DP1500 X Manual de usuario

Acer

Acer C20 Series Manual de usuario