Mitsubishi Electric PAC-USWHS002-WF-2 Manual de servicio

MANUFACTURED FOR:

MITSUBISHI ELECTRIC US, INC.

PAC-USWHS002-WF-2

• Read all Safety Instructions before using the Wireless Interface 2.

• This installation manual contains important safety information.

Be sure to comply with the instructions.

Warning Improper handling may have serious consequences,

including serious injury or death.

Caution Improper handling may have consequences, including

injury or damage to house.

• After installing the Wireless Interface 2, provide this installation manual for the

user. Instruct users to store it with their room air conditioner instruction manual in

a safe location.

1. Safety Instructions

About Wireless Interface 2

This Wireless Interface 2 will communicate status information and control the

connected air conditioner.

• Some room air conditioners are not compatible with the Wireless Interface 2.

Make sure that the room air conditioner is compatible with the Wireless Interface

2 before attempting to install it.

Contents

About Wireless Interface 2.........................................................................................1

1. Safety Instructions...................................................................................................1

2. What’s in the Box.....................................................................................................5

3. Parts........................................................................................................................5

4. Connecting the Wireless Interface 2..........................................................................5

5. Specications..........................................................................................................6

Memo..........................................................................................................................7

INSTALLATION/INSTRUCTION MANUAL

Before using the device, carefully read this installation/instruction manual to ensure

proper operation.

Keep this manual for future reference and give it to the technician when the device

is reinstalled or repaired.

FOR INSTALLER

Wireless Interface 2

Warning

• Do not use the red 5-pin

connector to create an unsupported

equipment combination.

Unsupported equipment combinations

may result in re, electric shock, and/

or damage/water leaks. Refer to the

Wireless Interface 2 compatibility

guide for more details.

• Users should not install the

Interface on their own.

Improper installation may result in

re, electric shock, or damage/water

leaks. Consult the dealer from whom

you purchased the unit or professional

installer.

• The Interface should be securely

installed in accordance with this

installation manual.

Improper installation may result in re,

electric shock, or damage.

• The unit should be mounted in a

location that can support its weight.

If the unit is installed in a location that

cannot support its weight, the Wireless

Interface 2 could fall and cause

damage.

• Install securely in a place where

the Wireless Interface 2 does not

interfere with equipment operation

or serviceability.

Improper installation may result in re,

electric shock, or damage/water leaks.

• Do not install Wireless Interface 2

inside a metal enclosure.

Improper installation may result in

diminished signal strength.

• Connect and fasten the electric

wires securely so external force

on the wires will not apply on the

terminals.

Improper connection and mounting

may result in breakdown, heat

generation, smoke generation, or re.

• Mitsubishi components or other

designated components must be

used for installation.

Improper component may result in re,

electric shock, or damage/water leaks.

• Electrical work must be performed

by a licensed professional using

the instructions detailed in the

installation manual.

Inadequate circuit capacity or

improper installation may result in

electric shock or re.

• This appliance is not intended for

use by persons (including children)

with reduced physical, sensory

or mental capabilities, or lack of

experience and knowledge, unless

they have been given supervision

or instruction concerning use of the

appliance by a person responsible

for their safety.

• Children should be supervised to

ensure that they do not play with

the appliances.

• This device complies with part 15 of

the FCC Rules. Operation is subject

to the following two conditions:

(1) This device may not cause

harmful interference; and

(2) This device must accept any

interference received, including

interference that may cause

undesired operation.

Wireless Interface 2

Warning

• This equipment has been tested

and found to comply with the

limits for a Class B digital device,

pursuant to part 15 of the FCC

Rules. These limits are designed

to provide reasonable protection

against harmful interference in

a residential installation. This

equipment generates, uses and

can radiate radio frequency energy

and, if not installed and used in

accordance with the instructions,

may cause harmful interference

to radio communications.

However, there is no guarantee

that interference will not occur

in a particular installation. If this

equipment does cause harmful

interference to radio or television

reception, which can be determined

by turning the equipment off and

on, the user is encouraged to try to

correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving

antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet

on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced

radio/TV technician for help.

Warning

• This equipment complies with radio

frequency exposure limits set forth

by the FCC for an uncontrolled

environment. This equipment

should be installed and operated

with a minimum distance of 20 cm.,

7.8 inch between the device and the

user or bystanders.

• This device must not be co-located

or operating in conjunction with

any other antenna or transmitter.

•Changesormodicationsnot

expressly approved by the party

responsible for compliance could

void the user’s authority to operate

the equipment.

• Do not connect the Wireless

Interface 2 to earth inside the air

conditioner.

Wireless Interface 2

Caution

• To prevent damage from static

electricity, touch a nearby metal

body to discharge static electricity

from yourself before touching the

Wireless Interface 2.

Static electricity from the human body

may damage the Wireless Interface

2 unit.

• Do not install the Wireless

Interface 2 in a place with much

steam, such as bathroom.

Avoid places where water is splashed

or where condensation forms on walls.

Installing in such places can cause

electric shock or breakdown.

• Do not install the Wireless Interface

2 in places with direct sunlight or

where the ambient temperature is

40º C, 104º F or more or is 0º C,

32º F or less.

Direct sunlight and high or low

temperature environments may cause

the Wireless Interface 2 to deform or

breakdown.

• Do not use in special

environments.

Use in places with much oil (including

machine oil), steam, or sulfuric gas

may lead to severe decrease in

functionality and damage to parts.

• Turn off power supply of connected

equipment when performing

construction or wiring work.Failure

to turn off the power supply to the

connected equipment may lead to

malfunction or breakdown of the

Wireless Interface 2 or connected

equipment.

• Dismantling the indoor unit.

Please refer to the indoor units

“service manual” for detailed

instructions for accessing the

control interface connector CN105

on the indoor unit control PCB.

Notes

• The End user should read and

accept the Terms and conditions

of the kumo cloud®before

commencement of the installation of

PAC-USWHS002-WF-2.

• To complete connection of the

PAC-USWHS002-WF-2 to the

kumo cloud®physical access to the

access point may be required.

• Visit http://kumocloud.com for

additional information about

controlling the

PAC-USWHS002-WF-2 from your

web browser or smart phone.

• The PAC-USWHS002-WF-2 should

not be installed and connected to

any Mitsubishi Electric system which

is to provide cooling or heating to

critical applications.

• Details of the air conditioner

and PAC-USWHS002-WF-2 can

be recorded on page 6 ‘Setting

Information’.

• Use of the PAC-USWHS002-WF-2

implies acceptance of our terms and

conditions located at kumocloud.

com/terms.

• The antenna used for this transmitter

must be installed to provide a

separation distance of at least

20 cm from all persons and must

not be co-located or operating in

conjunction with any other antenna

or transmitter.

Mitsubishi Electric’s Wireless Interface 2 is designed for communication to

Mitsubishi Electric’s kumo cloud®. Third party Wireless Interface 2 devices cannot

connect to Mitsubishi Electric’s kumo cloud®. Mitsubishi Electric is not responsible

for any

(i) underperformance of a system or any product;

(ii) system or product fault; or

(iii) loss or damage to any system or product; which is caused by or arises from

connection to and/or use of any third party Wireless Interface 2 or any third party

wireless or Wi-Fi service with Mitsubishi Electric equipment.to

2. What’s in the Box

3. Parts

● Turn off and verify the power has been disconnected to the complete

air-conditioning system

● Dismantle the indoor unit in accordance with the service manual and locate

CN105 on the main control PCB

● Connect the cable on the PAC-USWHS002-WF-2 to the CN105 connector on the

indoor unit

● PAC-USWHS002-WF-2 may be attached on or in close vicinity to the indoor unit.

Attach one strip to the PAC-USWHS002-WF-2 and the other to the installation site.

Align the strips and press to securely attach the PAC-USWHS002-WF-2 to the

installation site.

● Start up: Refer to the PAC-USWHS002-WF-2 Install guide located at

https://meus.mylinkdrive.com/item/PAC-USWHS002-WF-2.html

Wireless Interface 2 PAC-USWHS002-WF-2

4. Connecting the Wireless Interface 2

● Wireless Interface 2 with 2 removable plugs for optional connections

● Connecting Cable

● Velcro strips (2)

● Product insert

The PAC-USWHS002-WF-2 adds a second 5-pin interface (identied with a

red connector) for use with compatible control accessories. Please refer to the

Wireless Interface 2 compatibility guide to identify what control accessories may

be connected to this second 5-pin connector including what Mitsubishi Electric

equipment is compatible. The Mitsubishi Electric equipment is connected via a

cable plugged into the white connector.

Note: Installation should be conducted by a professional installer.

5.Specications

Input Voltage DC12.7V (from indoor unit)

Power consumption MAX 2W

Size W × H × D Inch (mm) .69 x 1.82 x 2.92

(17.526 x 46.228 x 74.168)

RF channel 1ch ~ 11ch

Usage environment Temperature 32 ~ 104º F (0 ~ 40º C)

FCC 2AIGCWFB003

Setting information

PAC-USWHS002-WF-2 address (MAC)

PAC-USWHS002-WF-2

serial number(ID)

Indoor unit model name

Indoor unit serial number

Outdoor unit model name

Outdoor unit serial number

System commissioning date

PAC-USWHS002-WF-2 installation date

Installer contact details

Name

Telephone number

Memo

Specications are subject to change without notice.

www.mitsubishielectric-usa.com

Toll Free: 800-433-4822

MITSUBISHI ELECTRIC US, INC.

CE-1519-L001

Otros manuales para PAC-USWHS002-WF-2

Tabla de contenidos

Otros manuales de Adaptador de Mitsubishi Electric

Mitsubishi Electric

Mitsubishi Electric LMAP04-E Manual de usuario

Mitsubishi Electric

Mitsubishi Electric PAC-SC36NA-E Manual de usuario

Mitsubishi Electric

Mitsubishi Electric LMAP03U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric BAC-HD150 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric PAC-SA88HA-E Guía

Mitsubishi Electric

Mitsubishi Electric MELSEC FX3U-485ADP-MB Manual del propietario

Mitsubishi Electric

Mitsubishi Electric R410A Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 3DA-1 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric LMAP03U Manual de usuario

Mitsubishi Electric

Mitsubishi Electric ERNT-ASLTX40 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric FX3U-4HSX-ADP Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 3DA-1 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric CC-Link Manual de usuario

Mitsubishi Electric

Mitsubishi Electric PAC-SE55RA-E Manual de usuario

Mitsubishi Electric

Mitsubishi Electric PAC-SE55RA-E Manual de usuario

Mitsubishi Electric

Mitsubishi Electric FX-485ADP Manual de usuario

Mitsubishi Electric

Mitsubishi Electric ERNT-2JQ212S Manual de usuario

Mitsubishi Electric

Mitsubishi Electric PAC-SA89TA-E Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MAC-558IF-E Manual de usuario

Mitsubishi Electric

Mitsubishi Electric ERNT-ASLT62DA Manual de usuario

Mitsubishi Electric

Mitsubishi Electric PAC-SC36NA-E Manual de usuario

Mitsubishi Electric

Mitsubishi Electric PAC-SF40RM-E Manual de usuario

Mitsubishi Electric

Mitsubishi Electric ERNT-CQB051N Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario